Greetings from JVS Electronics!!!! JVS Electronics is a Bangalore based Indian company engaged in the design, development and manufacture of Embedded power system protection, automation and control products. We have many International patents and the R&D unit constantly works on futuristic technologies. COMPANY PROFILE We, JVS Electronics Private Limited, was incorporated in the year 1991, for the development and manufacture of Control, Protection and Monitoring devices required for protecting electrical equipment. VISION : To be a globally Acknowledged Value company. MISSION: As an organization of excellence in power systems through â?? State of Art products & Solutions, Value Enhancement to customers, suppliers, partners, stakeholders, and employees, and Genuine concern for environment.â?? To respond to customer's varying needs with agility and quality. JVS is an ISO 9001 company. All the products which are included in our present range of manufacture have been type tested as per IS/ IEC specifications at CPRI, Bangalore. The range of products that are manufactured are microprocessor based numerical protective relays, electromechanical auxiliary & tripping relays,Annunciators, Hooters and instruments required for the protection of electrical distribution systems. In the last twenty years, we have supplied well over 2,50,000 relays and devices to various users in the country and all of them are giving satisfactory service. We have formal approvals from all the Electricity Boards like KPTCL and distribution companies, APTRANSCO and distribution companies of AP, TNEB,KSEB, MSETCL & DISCOMs, GETCO & DISCOMs, GRIDCO, RRVPNL & DISCOMs, UPPTCL & DISCOMs, HPSEB, J&K Power Development Department, WBSEB,CESC, etc for the use of our relays up to 220kV systems. Our relays have been purchased by almost all the leading switchgear manufacturers.'
later wiil be given given later
Power Distribution Components Air Circuit Breaker Moulded Case Circuit Breaker Switch Dis connectors Changeover Switches By Pass Switches HRC Fuse Links & Fuse Bases Power Control Components Power Contactor Electonic & Thermal Overload Relays Motor Protection Circuit Breaker Controling & Signalling Devices Industrial Plugs & Sockets Motor Starters Limit Switches Foot Switches Solid State Relays Brakes Final Distribution Components Miniature Circuit Breaker Residual Current Circuit breaker Distribution Boards
Sandeep Garg & Company equipped with the latest XRF analyzers for accurate reading on any metal. Our XRF alloy analyzers are portable hand-held devices that follows stringent quality control norms to ensure the requisite quality of metal scraps as per the contractual standards.
Tfr is innovative product of taurus designed to measure impedance along with resistance of transmission line t is Salient features: Ø the equipment operates at 25 khz which and virtually isolates the parallel transmission Tower earth path without physical isolation of over head earth wire by use of this high frequency and neutralizing circuits. Ø reliable, steady, repeatable readings in induced environment Ø constant current output (20ma) from a high voltage source (250v) to override the noise in the induced environment. Ø the taurus preziohm tfr is designed to be immune to power frequency and its harmonics Ø dynamic measurement. Ø housed in ip67 pelican casing. Packaging as per international standards
200 tones in different models. Portable models are very convenient and useful for site use where carrying frequently the specimens for testing in a standard laboratory is inconvenient and uneconomical. With special attachments, the machines can also be used for bricks, hallow or solid concrete blocks, using appropriate capacity machine. In general compression testing machine consists of a load frame with suitable platens and a pumping unit with pressure gauge, either hand operated or electrically-cum-hand operated. Load frame and pumping unit are connected by pressure pipes. Wooden packing
Foremost in quality of workmanship and investment in “state of art” technology to manufacture world class LT switchboards, we have established ourselves as a symbol of quality and innovation in this field. The Panels have been successfully tested at CPRI to withstand short circuit levels of 50KA for 1 sec, IP 54 degree of protection & Temperature rise as per international standards. The Design and Engineering department is well equipped with Computer Aided Design (CAD) systems and drafting facilities for accurate and quick preparation of design & execution.
Features of digital hour meter: Displays rpm, hours Programmable no. Of teeth Programmable Specifications : Supply: 8 – 35vdc Dimension 72*72*80
415v 50hz 3 phase electrical panel and panel switches.Motor control centers & power control centers. As per specification.
“POLYCAB” is an ISO-9001 Co. is one of the leading names in the wire & cable indust.with a track record of over three decades.CPRI/ ERDA tested prod. having lice.for IS 694/1554 (P-1, P-2) 7098 (P-1, P-2), 9857, 2465, 9968, 8783, 8784. “BRIMSON” is an ISO-9001 ,company having licence ISI 694, 1554, 7098 (P-1) that has made a mark for itself in a short period of more then two decade. All due to its commitment to provide a wide variety of Wires and cables. “BRIMPLAST” is also having a ISI Licensed issued by bureau of India standard as per IS:694/IS:1554(PART-1) and we have very sophisticated lab equipped with latest instruments for. testing ultimate strengths of onductors,insulation,steel & shelth in accordance to IS specification. “GI CABLE TRAY” We have all sizes of Perforated & Ladder type in GI/Hot Dip Galvanised/Powder, Coated cable tray. POLYCAB Brimson & Brimplast: PVC/XLPE 1.1 KV Power & Control (SOLID/Stranded) H.R. /FR/ FRLS Cables. Flexible Single Core & Multicore PVC/HR/FR OR FRLS Flexible Cables. Flexible Screened & Instrumentation PVC/FRLS Unarmoured & Armoured Cables. LAN (Cat-5 & Cat-6) Unarmoured & Armoured Cables. Brimplast: Speaker , C.C.T.V. (Camera) ,Co-Axial & Telephone Unarmoured & Armoured Cables. Teflon & Fiber Glass Cable. MDF BOX & CONNECTORS (Dis Connection Type). POLYCAB : Submersible & ELEVATOR Cables. Larsen & Toubro: [L&T] ACB, SDFU, FUSE, MCCB, Changeover, Motor & Soft Starters, Contactors, Relay, Timers, Electronic Meters , MPCB, PANEL METERS, PLC, CAPACITOR. hager: MCB, ELCB & Distribution Boards, 2 Way Changeover , Isolator, Automation & Control Devices. Tripper: ELCB+MCB [Combination]. Salzer: PVC CHANNEL & ROTARY SWITCH GIC: TIMERS & TIME SWITCH YASKAWA: AC Variable Frequency Drives.
The AEC1112- Computerized Universal Testing Machine with a maximum load capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton with the provision of testing various samples of metals and its different alloys for the testing in tensile mode for round and flat specimens as per the national and International standard like ASTM, DIN, ISO, EU and IS standards etc. capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton.
Use for power supply. Packing of 10 piece.
As per requirement As per requirement
Manual operation to microprocessor operated testers from 0-60kV, 0-80kV, 0-90kV and 0-100kV.
We are offering eut monitoring system that includes eut monitoring, analysis and data recording. These eut monitoring systems analyzes data during the test for interference or failure conditions, and records test data for retrieval after the test is complete. It is designed as a stand-alone system to communicate with the main test system using our eut monitoring and test software. The eut (equipment under test) monitoring system combines the following: Monitoring instrumentation Video and audio equipment Software to provide eut signal monitoring (analog and digital) Eut stimulation Monitoring for visual or audio interference during testing The monitoring is enabled only after the test level is established with the main test system, since the EUT Monitoring System is fully synchronized with test system. These are appreciated because all parameters captured by the EUT Monitoring System during testing ensures to accurately recreate interference or failure points to resolve compatibility issues monitored. These systems are configured specifically to cater the test needs and can be configured for specialized requirements such as audio breakthrough required by mobile radio standards and ABS/TCS testing needed in automotive test standards. Our entire range of standard as well as customized seamless interface with main test system completes the control of the EUT Monitoring System from the control room console. System Components: EUT stimulation and monitoring instruments selected to cover applicable specifications and meet your price/performance requirements Video monitoring system using shielded color cameras to visually monitor equipment under test An audio monitoring system can supply as a stand-alone solution or built into the video camera system A system controller with application software that offers power to control monitoring equipment These are used to process and store data, graphics, and results of series measurements System cabling and switching to connect the control room with the chamber Shielded room allow test engineers complete control of the EUT monitoring system from the desktop Fiber optic links for analog and digital signal monitoring. We are offering Radiated Conducted EMS that is used for EMS Testing Many electronic products. The subassemblies must meet immunity testing requirements depending on the product's target marketplace. These are designed specifically to meet the requirements of specific environmental use and internal manufacturer's requirements. It also needs an engineer to control instrumentation from a variety of vendors and perform detailed test procedures for numerous specifications. These are known for integrating test instrumentation, system controls, positioning devices, and software to perform automated, semi-automated, and manual immunity measurements in an anechoic chamber, shielded room, or test cell. The range of test specifications is carefully evaluated to develop an integrated test environment covering the basic, generic, product family and product specific standards. The entire recommendation is based on proven system installations, in-house research and development, and extensive experience with dozens of test instrument suppliers. It result in a seamless interface the test system and the test environment. We are offering a range of Radiated Conducted EMI that is designed and manufactured to use in an anechoic chamber, shielded room, OATS, or test cell to perform automated, semi-automated, and manual emissions measurements. These systems are integrated with test instrumentation, system controls, positioning devices and software. This helps to test specific products or subsystems for electromagnetic emissions according to international, R&D and manufacturer-specific standards. Designed especially to meet customerÆs requirements, these receive the exact system solution. This is offered without unnecessary components and costs associated with off-the-shelf, "one size fits all" test systems. Further, we also offer turnkey solution for our Radiated Conducted EMI, which includes system designing and installation with dozens of test instrument supplies. The turnkey EMI Test System designed by us assist to meet product testing requirements. A typical system includes: EMI test instrumentation selected to cover applicable frequencies and meet your price/performance requirements. Antennas/LISNs/Clamps selected to match both test standards and test facility capabilities. Measurement Accessories such as switching and positioning devices that simplify control and increase efficiency. An EMI Main Control Console with instruments and system controls strategically placed to provide test engineers easy access to all functions, and a comfortable, ergonomically-correct work environment. A System Controller with Application Software that offers state-of-the-art power to perform emissions tests from pre-scan to final measurements and to control multiple EMI analyzers and receivers. Proven Solutions: Our test system developments are based on the systems in Europe, North America, and Asia. Each new system incorporates the latest technologies instead of an off-the-shelf approach to design and to explicitly cover the standards. It provides accurate, repeatable measurements and minimizes demands on your limited resources. We are offering Observation System that is appreciated by the clients for conforming to various international quality standards. These are known as Specific Absorption Rate Test Systems (SRC), which include SAR Measurements, System Components, Measurement System, Probes & Measurement Accessories and Position Controller & Positioning Robot. The detail description of Specific Absorption Rate Test Systems is as follows: The SAR System: It is used to measure electromagnetic fields and calculated SAR over a customer-specified frequency range. All tests are conducted in a shielded test room. SAR Measurements: SAR testing works with the thermal effects of human exposure to RF electromagnetic fields. It corresponds to the relative amount of RF energy absorbed of a device close to the body. The test is conducted to verify that the RF energy emitted by a device is within permissible limits for public exposure as defined by test standards. The SAR Measurement System is comprised of the following subsystems: Measurement System: It is an easy to use, flexible package optimized for dosimetric evaluation of radio products. The whole package includes Data Acquisition Electronics and system control computer. Probes and Measurement Accessories: Various broadband probes and support accessories are available based on test requirements. It includes probes to measure current distribution on radio products in free space, to measure fields inside fluids simulating body tissue and to test radiated emissions from mobile radio equipment. Position Controller and Positioning Robot: The automated robot positions the probe inside the tissue-simulating liquid over a precisely defined volume. The robot is controlled by a multiprocessor positioning device. Air tieght packing with container, steel packing, wooden packing
Electrical switch gear.
Switchgear 3000 nos of mps-01 & 2500 nos of mps-02 as per requirements
Switchgear Matel clad & on load change over switchgear
Electronics, home appliance products, LED TV .Export and clearing.
Fans, earphones and electronics.
