BRIGHTOMNI BBU-L is a Tetrasulpho type optical whitener used in Paper size press, coating and wet end applications,to achieve high whiteness and brightness properties of Paper. BRIGHTOMNI BBU-L Liquid is special Optical Brightener of medium affinity Tetra Sulpho OBA for paper. It is an innovative OBA for the WET END application in acidic to neutral media (pH 4-7). BBU-L has a broad spectrum of application and has good compatibility with Acids & Alum. Average dosage 0.2 to 6.0 g/L with size press liquor. BRIGHTOMNI BBU-L can perform with conventional Starch at the size press. Also together with CMC, PVA and anionic and slightly synthetic sizing additives. It can be a ready use optical whitener in size press. This product is used to attain moderate to high whiteness.
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
Since SIZEOMNI 40S is cationic can be used in combination with weakly cationic auxiliaries. For adding SIZEOMNI 40S, the pH of solution should be 4. For enhance the SIZEOMNI 40S performance, cationic fixing agent should be required. Application of SIZEOMNI 40S in the size press changes the wet ability of the paper and reduces its water absorption. The presence of aluminium ions in the base paper is not necessary for obtaining optimum results. Since SIZEOMNI 40S is cationic, it cannot be applied in the size press with fluorescent whiteners and normal dyes or basic dyes. Only cationic dyes can be added in the solution. The normal drying temperatures on the paper machine are sufficient to develop full sizing. No additional curing period is required. SIZEOMNI 40S has good stability in the presence of large quantities of electrolytes. SIZEOMNI 40S can be added batch-wise to the starch solution storage tank as well as continuously in the operating tank or the feeding pipe to the size press. SIZEOMNI 40S is low foaming, so defoamers are normally not required.
With the product name "SOFTOMNI 2000" is a proprietary formulated alkaline sizing agent. ALKYL KETENE DIMER (AKD) emulsion, designed to size the paper in the neutral to alkaline ph range of 6.5 to 8.5 SOFTOMNI is a free flowing white emulsion stable to size any type of furnishes preferably containing calcium carbonate. Different type of furnishes require different application method and dosages. SOFTOMNI 2000 is added as such (can be diluted with water to the maximum extent of 1:3 ratio) in the thick stock by diaphragm type of dosing pump. Addition of SOFTOMNI 2000 before filler is preferable to get best sizing effect. The efficiency of ALKYL KETENE DIMER depends on the retention and drainage aid program. The higher the drainage, first pass retention and first pass ash retention, optimum is the efficiency of AKD. A cationic scavenger in necessary where there is high levels of anionic trash in the furnish like deinked pulp.
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
With our product name BONDOMNI 420 G, We produce SAE Anionic Surface Sizing Agent. Since BONDOMNI 420 G is anionic can be used in combination with weakly cationic auxiliaries. Application of BONDOMNI 420 G in the size press changes the wet ability of the Paper and reduces its water absorption. The presence of aluminium ions in the base Paper is not necessary for obtaining optimum results. Since BONDOMNI 420 G is anionic, it can be applied in the size press with fluorescent whiteners, direct dyes or basic dyes. The normal drying temperatures on the Paper machine are sufficient to develop full sizing. No additional curing period is required. It has good stability in the presence of large quantities of electrolytes.
STRENGTHOMNI 6033 is a cationic polyamide wet strength resin supplied as an aqueous solution containing 30%++ solids. When applied under acidic or alkaline stock conditions, STRENGTHOMNI 6033 will efficiently increase the wet strength properties of finished paper or paperboard products. STRENGTHOMNI 6033 resin is highly effective for developing wet strength in facial tissue, napkins, towels, carrier board, liquid packaging, bag paper, linerboard, medium, and other specialty papers. STRENGTHOMNI 6033 performs over a broad pH range of 4.0 9.0 (with best efficiency between 6.5 - 8.0) in the presence of normal papermaking additives. Apart from this, we also produce AKD Sizing Agent, SAE Anionic for Sizing, Fixing Agent / Coagulants, Optical Brightener.
Glacial Acetic Acid is a colorless, transparent liquid with a pungent odor. It is a concentrated form of acetic acid (99% purity) and is widely used as a reagent in chemical reactions, as well as in the production of various chemical compounds. Its name "glacial" comes from its ability to freeze at slightly below room temperature, forming ice-like crystals.
Cocamidopropyl Betaine (CAPB) is a mild, amphoteric surfactant derived from coconut oil. It is commonly used in personal care and household products for its excellent foaming, thickening, and conditioning properties. CAPB is known for being gentle on the skin and is widely used in formulations such as shampoos, body washes, facial cleansers, and liquid soaps.
Brand PTC Purity 99% Usage/Application Industrial Packaging Type Drum Packaging Size 100 L Physical Form Liquid We have highly acknowledged organization engaged in presenting a remarkable range of Dipentene oil
Application Detergent Liquid Grade Industrial Form Liquid Is It Soluble In Water Soluble In Water Purity 99 Percent Packaging Type Barrels Our company has achieved widespread recognition in providing Liquid Acid Slurry Labsa.
Calcium Hydroxide Hydrated Lime
Purity % 99% Packaging Size 25 kg Bag Packaging Details 25 litres Drum Usage/Application Industrial Grade Standard Industrial Grade Physical State Powder Synonyms Ethylene alcohol, Monoethylene glycol, Hypodicarbonous acid Country of Origin Made in India
Purity % 99.9% Packaging Details 20 kg Bag Usage/Application Industrial Grade Standard Industrial Grade Physical State Granules Color White Synonyms PVA Country of Origin Made in India
Purity 99% Purity % 99% Packaging Size 50 litres Drum Grade Industrial Grade Usage/Application Industrial Packaging Details 25 Litres Drum Grade Standard Industrial Grade Physical State Liquid Synonyms ethyl alcohol
Purity % 99% Packaging Details 25 kg Bag Packaging Size 25 kg Bag Usage/Application Industrial Physical State Powder Color White Synonyms PVA, Polyethenol, Polyviol, PVOH Country of Origin Made in India
Grade Standard Industrial Grade Purity % 99% Packaging Size 50 litres Drum Packaging Details 50 litre Drum Usage/Application Pharma API Production Physical State Liquid Synonyms methyl alcohol
Purity % >99% Packaging Details 200 litre Drum Usage/Application Solvent in paints Grade Standard Industrial Grade Synonyms n-Butanol Physical State Liquid Uses of Butanol Butanol has been primarily used as a solvent found in paints and can also be utilized as a fuel. It is also used as a component of hydraulic and brake fluids. It is also used as a base for perfumes, but on its own has a highly alcoholic aroma. Butanol is a central nervous system depressant.This means that butanol can have effects like ethanol when ingested or drunk by living beings such as humans. First Aid Measures Eye Contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Skin Contact: Wash off immediately with plenty of water for at least 15 minutes. If skin irritation persists, call a physician. Inhalation: Move to fresh air. If not breathing, give artificial respiration. Get medical attention if symptoms occur. Ingestion: Clean mouth with water and drink afterwards plenty of water.
Packaging Type PP BAG Packaging Size 25 KG Physical Form SOLID Chemical Formula C10H12N2Na4O8 CAS Number 194491-31-1 Molecular Weight 398.19 g/mol Ferric sodium EDTA, also known as sodium ferric ethylenediaminetetraacetate, is a broad spectrum molluscicide used to kill snails and slugs and protect agricultural crops and garden plants, and in particular to eliminate infestations of Cornu aspersum, the common garden snail.[1] [2] Chemically, it is a salt of ethylenediaminetetraacetic acid.
Packaging Size 25,50 KG Composition Simethicone I.P is a mixture of polydimethylsiloxane containing repeating units of the formula -( Form Liquid SOLUBIITY Insoluble in water and alcohol; the liquid phase is soluble in chloroform, in solvent ether CATEGORY Defoaming agent Country of Origin Made in India imethicone IP/BP/USP is also known as Activated Dimethicone. The chemical is used in the preparation of antacid where it acts as the anti-flatulent agent. The clinical use of this chemical is based upon its anti- foam property that is beneficial in the fermentation process to control the foam. Features: Translucent and grey viscous liquid Odorless Contains polydimethylsiloxane and silicone dioxide Insoluble in water and alcohol Effective antiflatulent Heavy metal content Effective defoamer at low concentration
