Precise and accurate hot melt adhesive applicator with heated tank and heated rollers. Perfect for footwear, bags, belts, packaging, stationary, woodworking, and more. This applicator is suitable for Hot-Melt Adhesives, consists of heated tank, heated rollers and speed control system. The machine has a thickness adjustment system and can support material thickness from 3 to 20mm The heated glue tanks are treated with Teflon which help in preventing carbonization of hot melt adhesives. The machine has an emergency stop button to prevent any accidents. This applicator is highly recommended for footwear, bag, belt, stationery, packaging, labelling, fly traps, sporting goods etc. Model No. BS-831s Tank Capacity 3 kg Melting Rate 8 kgs/hour Total Power 2.5 kW Coating Width 300 mm Max Operating Temperature 250°C Power Requirement 220V/50Hz, Single Phase Machine Dimensions 515 x 355 x 420 mm
Calcium chloride fused / Lumps 75% (Cacl2.2H2O) Calcium chloride dihydrate Powder 75% (Cacl2.2H2O) Calcium chloride Anhydrous Powder 91%-94% Calcium chloride Anhydrous Powder 94% Calcium chloride Granules Prills 95% Calcium chloride Granules Prills Food Grade Altura 95% Calcium Chloride is an inorganic compound, a salt with the chemical formula CaCl. It is a white crystalline solid at room temperature, and it is highly soluble in water. It can be created by neutralizing hydrochloric acid with calcium hydroxide. It is used to prevent ice formation and therefore used in deicing. Used in the production of activated charcoal. Used as a sterilant for male animals. It is used in heating pads and self-heating cans. It is Used in rubber ind. , paint ind. And Aquaculture solution.
With a good particle size distribution and special surface treated , CR 616 Rutile Ti02 produced by Chloride process is a multi application product
CR-615 is a rutile titanium dioxide pigment produced by chloride process. It is recommended using in plastic industries. It has excellent melt flows in plastics and master batches with blue undertone , low oil absorption, high hiding powder , good dispersion , excellent fluidity and high machinability.
MA-55 is anatase Titanium Dioxide Pigment. It has high purity good particle size, high distribution and high hiding power. good whiteness, excellent dispersion.
MA-66 is anatase Titanium Dioxide pigment. It is a high grade anatase Ti02 with excellent process properties, high purity, strong hiding power and high whiteness
R-566 is produced on base of the vulcanization process quality control experience, also used the new innovated research fruit such as inorganic envelope, organic treatment, salt treatment, calcination control
Titanium Dioxide (TiO2) Anatase is a water dispersible dry pigment recommended for use in the manufacture of rubber, plastics, paints and coatings, and paper. It has excellent brightness and high tint strength. Anatase (B101) is an excellent choice for filling of paper.
It is a rutile titanium dioxide pigment produced by zirconia, alumina inorganic and organic surface treated, designed to give the good whiteness, excellent gloss, high tinting strength, super durability and good dispersion properties.
Ti-Pure R-902+ is a multipurpose rutile titanium dioxide pigment manufactured by the chloride process for both interior and exterior coatings applications. It is a fine dry powder with the following general properties. Table 1. Analysis and Physical Properties of Ti-Pure R-902+ Property.
Kemox RC 822 is a silica alumina and organic treated titanium dioxide pigment produced by the chloride process. It has the highest degree of gloss and tint retention properties in exterior film applications.
R878 is a multi-purpose rutile TiO2 pigment is known for its low oil absorption, high gloss, high tinting strength, durability, and dispersability. Produced by the Sulfate process, with a very fine particle size, it has excellent hiding power, blue tint undertone.
R818 is a titanium dioxide pigment treated with an inorganic silicon-aluminum coating and organic solvents, which has a strong glossiness, and good hiding power, weather resistance, and dispersibility.
Titanium Dioxide (TiO2) Anatase is a water dispersible dry pigment recommended for use in the manufacture of rubber, plastics, paints and coatings, and paper. It has excellent brightness and high tint strength. Anatase (B101) is an excellent choice for filling of paper.
Rutile is a mineral composed primarily of titanium dioxide, TiO2. Rutile is the most common natural form of TiO2. Rutile has among the highest refractive indices of any known mineral and also exhibits high dispersion. Natural rutile may contain up to 10% iron and significant amounts of niobium and tantalum.
Caustic Soda is the chemical Sodium Hydroxide (Chemical Formula), also known as lye. In its purest form, the caustic, highly toxic, crystalline solid is an inorganic compound that is soluble in water and insoluble in ether and other non-polar solvents. Caustic soda has many industrial applications that include the manufacture of pulp and paper, textiles, drinking water, soaps, detergents, and drain cleaner.
Food Grade Anhydrous 94-97% Calcium Chloride Pellets are most often used in solution form to enhance the flavor and/or texture of food products. In cheese- making, calcium chloride helps achieve desirable setting times and curd firmness, without adversely influencing cheese composition or quality.
Product: Eosin Blue C.A.S. No.: 548-24-3 CI NO.: 45400 M.F.: C20H6Br2N2Na2O9 M.W.: 624.09gm/mole Specifications: Dye content (By Gravimetry) = >85% Solubility 0.1 % (Dist. Water) = Clear solution Absorption maximum (Dist. water) ?max = 516-520nm Absorptivity (A1%1cm in water at ?max) = >800 Loss On Drying (110�°C) =
Product: Giemsa's Stain C.A.S. No.: 51811-82-6 Specifications: Solubility 0.1 % (MeOH) = Clear solution Absorption Maximum(in MeOH) ?1max = 640-650 nm Absorption Maximum(in MeOH) ?2max = 520 - 525 nm Absorptivity (A1%1cm in MeOH at ?1max on dried substance) = 950-1150 Absorptivity (A1%1cm in MeOH at ?2max on dried substance) = 600-750 Loss On Drying (110�°C) =
Product: Leishman's Stain C.A.S. No.:12627-53-1 Specifications: Solubility 0.1 % (MeOH) = Clear solution Absorption Maximum (in MeOH) ?1max = 640-645nm Absorption Maximum (in MeOH) ?2max = 522-525nm Absorptivity (A1%1cm in MeOH at ?1max on dried substance) = >900 Absorptivity (A1%1cm in MeOH at ?2max on dried substance) = >650 Loss On Drying (110�°C) =
