G FINE Micro FINE ULTRA FINE EROPEAN BASED FINEST FILLER
G FINE is a new generation supplementary cementitious material (SCM) with a built-in high tech content. In spite of its high fineness it does not increase water demand at the dosage range of 5 to 15 percent of normal OPC in general. In fact concrete slump is seen to be improved, due to the dense packing of cementitious material, producing low void content. The use of G FINE results in hydrated cement matrix to comprise of very small pores.
G FINE is a specially processed product based on high glass content with high reactivity obtained through the process of controlled granulation. The raw materials are composed primary of low calcium silicates. The processing with other select ingredients results in controlled particle size distribution. G FINE can also be used as a high range water reducer to improve compressive strength or as a super workability aid to improve flow.
G FINE can be used as practical substitute for Silica Fume as per the results obtained. If the advantages of G FINE are observed in the concrete mix design, the initial rate of strength development was found to be increased or similar as that of Silica Fume.
Where to use G FINE :
Residential, roads, airports, commercial building. Producing mass concrete structures and pile. In high-rise structures the concrete is to be pump easily. Low water to binder ration for high performance concrete. Precast concrete element for heavy structures precast units. To improved initial strength and increase faster . Better retention of workability and improved strength gain.
Benefits of G FINE :
The workability of the mix retention is improved Improve durability and permeability of concrete Increased strength of concrete Reduction in segregation can be observed in the mix Reduction in heat of hydration of the mix Non- toxic , eco friendly cost effective, economical solution
G-FINE
Packaging:
G FINE is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25kg plastic lined bags.
Storage:
G FINE when stored correctly has an indefinite shelf life. Like cement, G-FINE must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo Or warehouse .
BuildWell Colour Putty is a wall putty with added advantage of shades like Pink, Yellow, Green and
Off-White, especially developed as a base coat to provide smooth finish on plastered surface, and hence
ideal for expensive paint application because paint saving can be up to 50%.
It contains finest quality minerals, polymers, white cement and pigments. It can also be used for low end
application like basement parking lot, etc as 'Final Finish'.
Benefits :
- Reduces paint consumption
- Avoid frequent repainting.
- Cost effective.
- Aesthetic look for ceiling and Interior walls.
- Ease of use at site.
Advantages :
- True colour tone of the paint is
maintained, primer is not required.
- Protects expensive paint from dampness,
peeling off, and flaking.
- Makes paint durable.
- Suitable for Interior.
- Paint finish is superior.
These Cementitious Grouts Were Originally And Established By ACC And Large Scale R&D Activities Were Subsequently Carried Out At RCD, Thane For Its Development. Calder's India Has Focused Attention On Grouting Business And Has Expert And Team Of Sales And Service Personnel Located In Various Regions To Serve A Growing List Of Customers.
In This Process, A Hole Is Drilled To Give Entrance To The Cracks. The Hole Cuts Some Of The Cracks. Others Connected To Them Let The Grout Travel Out Further To Drill. If Suitable Grout And Methods Are Used The Grout Is Pushed Out Into The Open Joints And Fills Most Of Them. This Type Of Grouting Is Used In The Foundations Of Dams And Other Large Civil Engineering Structures.
We, Imperial World Trade Are Originally And Conceptualized And Large Scale R&D Activities Were Subsequently Carried Out Development.
A cement is a binder, a substance that sets and hardens and can bind other materials together. The word "cement" can be traced back to the Roman term opus caementicium, used to describe masonry resembling modern concrete that was made from crushed rock with burnt lime as binder.
A cement is a binder, a substance that sets and hardens and can bind other materials together. The word "cement" can be traced back to the Roman term opus caementicium, used to describe masonry resembling modern concrete that was made from crushed rock with burnt lime as binder.
We are the importer and exporter, wholesaler of cement clinker. We can supply Clinker as per your specification provided your order quantity is more than 25000 MT.
We can supply this material at various ports like Vizag, Kandla, Paradip, Haldia and various east cost ports.
If you are interested in bulk requirement then please contact us.
We will give you very competitive price without compromise in the quality.
Offering all branded finest cement All types of cements are available
Price of product ( USD price or FOB price) -
20 USD - 35 USD per Bag
depending upon the type and
grade
Product origin - Tamil Nadu-India
Building and Construction (All Grades)
Certification as per buyer requirement
Place of Orgin : Tamil Nadu (India)
Port of Loading : Chennai Port
Payment Term : Initially, 50% Advance and
remaining 50% irrevocable LC
Delivery Time : 20 working days
Minimum Order : 20 Feet Container
Packaging : 25-50 Kg Bag (1 Sack)
Oil Well Class G cement is a specialty product available for cementing offshore and onshore wells under high pressure and temperature. Oil Well Cement is a HSR Cement. Available in 1 MT / 1.5 MT Jumbo bags.
Portland cement is the most common type of cement in general use around the world as a basic ingredient of concrete, mortar, stucco, and non-specialty grout
Portland cement is the most common type of cement in general use around the world as a basic ingredient of concrete, mortar, stucco, and non-specialty grout. It was developed from other types of hydraulic lime in England in the mid 19th century, and usually originates from limestone
Origins : nigeria,china ,iran ,ghana, italy, india
Portland cement is the most common type of cement in general use around the world as a basic ingredient of concrete, mortar, stucco, and non-specialty grout. It was developed from other types of hydraulic lime in England in the mid 19th century, and usually originates from limestone
Sakarni has collaborated with the best of global players to offer the ultimate World-class white cement to the Indian market. This helps to maintain the global standards and practices in the Indian industry, keeping Sakarni ahead of the competitors in all manners.
Sakarni white cement is produced with stringent quality checks on all the international standards, rather it delivers better quality than the international standards
