SPECIFICATION : SJR 40 F
Drilling cap. In Steel 40
Drilling cap. C. I. 45
Tapping in M. S. 20
Spindle center to col. 890 / 387
Spindle travel 235
Spindle nose to base 900 / 185
Dia. of column 165
Dia. of RAM 72
Size of table 380 x 280 x 275
Overall base size 1270 x745 x200
No. of spindle speed (8 speed) 90 to 2630 RPM
Taper in spindle base MT-4
Machine area of base 1200 x 605
Drill motor (gear drive) 1.5 HP & 1 HP
Total height 1900
V-Belt size A-24, B-47
Drilling cap. In Steel 38
Drilling cap. C. I. 45
Tapping in M. S. 15
Spindle center to col. 320
Spindle travel 240
Spindle nose to base 1000
Dia. of column 121
Dia. of RAM 72
Size of Sq. Table 375 x 475
Overall base size 720 x 470
No. of spindle speed (8 speed) 90 to 2630
Taper in spindle base MT-3
Machine area of base 485 x 445
Drill motor (gear drive) 1.5 HP 1440 RPM
Total height of machine 1800
V-Belt size B-58
Net Weight
325 Kgs.
Drilling cap. In Steel 25
Drilling cap. C. I. 32
Tapping in M. S. 12
Spindle center to col. 230
Spindle travel 145
Spindle nose to base 1000
Dia. of column 90
Dia. of RAM 72
Size of Round Table 365
Overall base size 570 x 345
No. of spindle speed (8 speed) 105 to 2650
Taper in spindle base MT-3
Machine area of base 260 x 350
Drill motor (gear drive) 1 HP 1440 RPM
Total height of machine 1625
V-Belt size B-49
Net Weight
200 Kgs.
Technical specification:-
-drilling in m.S.:25
-end milling in m.S.:20
-tapping in m.S.:20
-boring in m.S.:30
-spindle hole taper:mt-3
-spindle travel:150
-spindle speeds [rpm x steps]:1002650 x 8
-diameter of ram:72
-spindle autofeed ranges:fine feed
-dist. spindle center to column:206
-work table:255 x 460
-longitudinal travel:350
-cross travel:206
-diameter of column:90
-drill-head motor:1 hp / 1440 rpm
-head motor v-belt:b-46.
Technical specification:-
-drilling in m.S.:25
-end milling in m.S.:20
-tapping in m.S.:20
-boring in m.S.:30
-spindle hole taper:mt-3
-spindle travel:150
-spindle speeds [rpm x steps]:1002650 x 8
-diameter of ram:72
-spindle autofeed ranges:fine feed
-dist. spindle center to column:206
-work table:255 x 460
-longitudinal travel:350
-cross travel:206
-diameter of column:90
-drill-head motor:1 hp / 1440 rpm
-head motor v-belt:b-46.
25 To 38 mm Universal Radial Drill Machine
Specification Model
Drilling Capacity (in Mild Steel) 25 mm
Pillar Diameter 125 mm
Spindle nose to table distance 410 mm
Spindle nose to base distance 660 mm
Distance from Spindle centre to Pillar face 670 mm
Taper in Spindle MT.3
Number of Speed 8 Speed
Range of Speed 90 to 2300 RPM
Table Size 250 x 200 x 200 mm
Base Size (Machined Area) 500 x 600 mm
Overall Base Size 925 x 600 mm
Spindle Travel 220 mm
Pillar Length 1220 mm
Overall height with pulley Guard 1425 mm
V. Belt Section B. 43" & A. 23"
Weight (Approx) 500 Kgs
Motor 1440 RPM 3 Phase 440 Volts 1 HP & 0.5 HP
Drilling cap. In Steel 40mm
Drilling cap. C. I. 45mm
Tapping in M. S. 30mm
Spindle center to col. 890 / 387 mm
Spindle travel 235 mm
Spindle nose to base 900 / 185 mm
Dia. of column 165 mm
Dia. of RAM 72 mm
Size of table 380 x 280 x 275 mm
Overall base size 1270 x 745 x 200 mm
No. of spindle speed (8 speed) 90 to 2630 RPM
Taper in spindle base MT-4
Machine area of base 1200 x 605 mm
Drill motor (gear drive) 1.5 HP & 1 HP
Total height 1900
V-Belt size A-24, B-46
Net Weight 890 Kgs
SPECIFICATION : VMT 38
Drilling cap. In Steel 38 MM
Drilling cap. C. I. 45 MM
Tapping in M. S. 20 MM
Spindle center to col. 320 MM
Spindle travel 240 MM
Spindle nose to base 1000 MM
Dia. of column 120 MM
Dia. of RAM 72 MM
Size of Sq. Table 375 x 475 MM
Overall base size 720 x 470 MM
No. of spindle speed (8 speed) 90 to 2630
Taper in spindle base MT-3
Machine area of base 485 x 445 MM
Drill motor (gear drive) 1.5 HP 1440 RPM
Total height of machine 1800
V-Belt size B-58
Net Weight 325 Kgs.
25 mm capacity Pillar type Drilling machine with S.G.I Steel Gears. With Electric Motor, Reverse/Forward Switch and V-Belt.
Max. capacity in Mild Steel 25 mm
Spindle Taper MT-3
SGI Steel Gears (Heavier than ordinary Cast Iron (casting) gears.
Dia. of Ram 72 mm
Dia. of Column 90 mm
Spindle Centre to column 250 mm
Table Size: - 345 x 345 mm
Max. Distance Spindle nose to Table 710 mm
Max. Travel of Spindle 150 mm
Motor 1 HP 3-Phase
40 mm capacity Radial type Drilling machine with All Geared (Fully oil bath 9 speeds gear box with single speed Electric Motor), Heavy Duty and Successful Auto Feed (2 Feed) with Fine Feed Gear Box, Fully oil bath Head Lifting Gear box, Harden gears with complete Electricals (2 HP and 0.5 HP. Ele. motors and Panel board) and Molded Coolant Tank in base. With Box Table.
Drilling Capacity 40 mm In Mild Steel
Drilling Capacity 45 mm in Cast Iron
Dia. of Ram 78 mm
Dia. of Column 165 mm
Auto Feed 0.04 and 0.08 (mm per spindle rotation)
Spindle Travel 260 mm
Machine Base LxBxH 1290 x 760 x 190 mm
Max. Min. Distance Spindle Nose to base 925 to 230 mm
Max. Min. Distance Spindle Center to column 875 x 360 mm
Size of Box Table 305 x 305 x 380 mm
Main Motor 2 HP 1440RPM
Lifting Motor 0.5HP 1440RPM
40 mm capacity Radial type Drilling machine (Back Geared Drive) with S.G.I Steel Gears, Molded Coolant Tank in Base and fully Oil bath Lifting Gear box. With 2 Electric Motor, 2 R/F Switch and 2 V-Belts. With Box Table.
Drilling Capacity 40 mm In Mild Steel
Drilling Capacity 45mm in Cast Iron
Tapping Capacity 25mm in Mild Steel
Tapping Capacity 30mm in Cast Iron
SGI Steel Gears Heavier than ordinary Cast Iron Gears.
Spindle Tapper MT-4
Dia. of Ram 78 mm
Dia. of Column 165 mm
Spindle Travel 260 mm
Working Area of Base 870 x 760 mm
Machine Base LxBxH 1290 x 760 x 190 mm
Max. Min. Distance Spindle Nose to base 925 mm to 230 mm
Max. Min. Distance Spindle center to column 875 x 360 mm
