Cargo Hooks
Standard Trapezoidal section point Hooks with Shank Note Undercut according to IS - 1369 - 1961 Calculating formulae for C: For MS, C = 26.73 P For HS, C = 23.17 P # Machined shank diameter (Min) See IS: 4218-1967 ISO metric screw threads $ Boundary dimensions of rolling bearings for general engineering purposes. MS = Mild Steel HS = High Tensile Steel
Eye Hooks For Chain
Mild Steel D Shackels
Shackles ut Bolt Type Anchor Bow Shackle Round Pin Anchor Bow Shackle SL-2130 Bolt type anchor shackles with thin head bolt-nut with cotter pin. Meets the requirements of Federal Specification SL-209 Round pin anchor shackles meet the requirements of Federal Specification Working Load Limit Tonnes ISS Crosby,Body Dia d C (mm),Pin Dia D B (mm),Jaw Inside Width (W) A (mm),Bow Dia (F) (mm),Inside Length C (mm),Eye Outside Dia (E) (mm),Average Weight with Nut Bolt Type Pin (kg) 0.33,4.8 6.4 9.7 15.2,22.3,14.2,0.0 0.5,6.4,7.9,11.9,19.8,28.7,15.5,0.1 0.75,7.9,9.7,13.5,21.3,30.9,19.1,0.1 1.0,9.7,11.2,16.8,26.1,36.5,23.1,0.1 1.5,11.2,12.7,19.1,28.7,42.9,26.9,0.2 2.0,12.7,16.0,20.6,33.3,47.7,30.2,0.3 3.25,16.0,19.1,26.9,42.9,60.5,38.1,0.6 4.75,19.1,22.4,31.8,51.0,71.0,46.0,1.0 6.5,22.4,25.4,36.6,58.0,84.0,53.0,1.5 8.5,25.4,28.7,42.9,68.5,95.0,60.5,2.4 9.5,28.7,31.8,46.0,74.0,108.0,68.5,3.1 12.0,31.8,35.1,51.5,82.5,119.0,76.0,4.3 13.5,35.1,38.1,57.0,92.0,133.0,85.0,6.0 17.0,38.1,41.4,60.5,98.5,146.0,92.0,7.8 25.0,44.5,51.0,73.0,127.0,178.0,106.0,13.8 35.0,51.0,57.0,82.5,146.0,197.0,122.0,20.4 55.0,66.5,70.0,105.0,184.0,267.0,145.0,38.9 85.0,76.0,82.5,127.0,200.0,330.0,165.0,70.0 120.0,92.0,95.0,133.0,229,372.0,203.0,120.0 150.0,104.0,108.0,140.0,254.0,368.0,229.0,153.0 Features Working Load Limit permanently shown on every shackle. Forged - Quenched and Tempered, with alloy pins. Capacities1 ton to 150 tons. Shackles 55 tons and smaller can be can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Material Certification (Chemical) must be requested at the time of order. Made from SAE 8620
S.W.L. on Hook tons, No of Sheaves, A, mm, B, mm, For Dia. Wire Rope mm, D, mm, L, mm, E, mm, F, mm, R, mm, Approx. Wt. per Pc kg, 10, 1, 350, 300, 20, 55, 720, 33, 30, 35, 175, 13, 1, 350, 300, 20, 70, 790, 39, 35, 40, 190, 17, 1, 450, 400, 22, 75, 960, 48, 40, 50, 210, 12, 2, 300, 250, 18, 40, 750, 30, 28, 30, 130, 12, 2, 350, 300, 20, 40, 800, 30, 28, 30, 170, 27, 2, 400, 250, 22, 70, 1060, 42, 40, 42, 220, 27, 2, 450, 400, 22, 70, 1110, 42, 40, 42, 260, 35, 2, 450, 400, 22, 80, 1220, 48, 45, 50, 280, 15, 3, 300, 250, 18, 45, 750, 30, 25, 30, 145, 18, 3, 350, 300, 20, 50, 850, 30, 28, 30, 190, 30, 3, 400, 350, 22, 60, 1050, 39, 35, 40, 315, 35, 3, 400, 350, 22, 70, 1125, 39, 35, 40, 315, 20, 4, 350, 300, 20, 55, 870, 30, 28, 30, 290, 27, 4, 350, 300, 20, 55, 980, 30, 28, 30, 290, 32, 4, 350, 300, 20, 60, 1075, 33, 30, 33, 310, 45, 4, 450, 400, 22, 70, 1300, 40, 35, 40, 475, 45, 4, 500, 450, 26, 70, 1300, 40, 35, 40, 500, Note, More and larger Sheaves: on request, Hooks: plain or with thrust bearing, Bearing type of sheaves: Roller / Ball Bearing, Safety latch: on request, Also available with Ramshorn hook., Weight: can be varied on request., Crane blocks of smaller & larger capacities are available on order.
A General Idea Indicating The Safe Working Loads Of Our Blocks, Dia of Sheave Circf. of Rope, 6, 1-1 1/4, 7, 11/4-1 1/2, 8, 11/2-1 1/4 10, 1 1/4 2 1/4 12, 2 1/4-2 1/2, 14, 2 1/2-3, 16, 3-3 1/2, 18, 3 1/2-4, S.W. L. tons, Single, Sheave, 0.75, 1.5, 2, 3, 5, 6, 7, 10, Double, Sheave, 1, 2, 3, 5, 8, 10, 15, 20, Triple, Sheave, 1.5, 2.5, 5, 10, 12, 15, 20, 25, Safe Working Loads (S.W. L.) Of Rigs B. S.: 4018-1966, Dia of Sheave, Dia of Rope, S.W. L., per Single, part of rope, Ton, Safe Working Loads of Rigs, inch mm inch mm 1/1 Rig Ton 2/1 Rig Ton 2/2 Rig Ton 3/2 Rig Ton 3/3 Rig Ton, 5, 127, 3/8, 9, 0.75, 1.5, 2.25, 3.0, 3.75, 4.5, 6, 152, 7/16, 11, 1.0, 2.0, 3.0, 4.0, 5.0, 6, 7, 177, 1/2, 13, 1.25, 2.5, 3.75, 5.0, 6.25, 7.5, 8, 203, 9/16, 14, 1.50, 3.0, 4.50, 6.0, 7.40, 9.0, 9, 228, 5/8, 16, 2.0, 4.0, 6.0, 8.0, 10.0, 12.0, 11, 279, 3/4, 19, 3.0, 6.0, 9.0, 12.0, 15.0, 18.0, 12, 304, 7/8, 22, 4.0, 8.0, 12.0, 16.0, 20.0, 24.0, Selection Criteria: Sheave Dia/Rope Dia = At least 12, The safe working load per single part of rope is approximately one sixth of the nominal breaking load of ropes as 2 2 specified in B.S.302 621 in the 6 x 37 group of tensile strength 100/110, ton / inch (160/175 kgf/mm ). This is the nominal breaking load on which the design of blocks to this standard is based., The manner of test laid down in schedule II of DOCK Workers (Safety, Health, and Welfare)Regulations, 1990, is as follows:, Article of Gear, Proof Load, Single sheave pulley block, Four times the safe working load, Multiple sheave block with safe working load up to and including 20 tons, Twice the safe working load, Multiple sheave block with safe working load over 20 tons up to and including 40 tons, 20 tons in excess of the safe working load, Multiple sheave block with safe working load over 40 tons, One and a half times the safe working load, Note, Higher capacity pulley blocks manufactured against order., Crane Block, Snatch Block
Nominal Size, Outside Link Length, Outside Link Width, Pitch, Capacity, WT / MTR, GR80, GR30, dn, 5dn to 4.75dn, 3.25dn to 3.5 dn Max, 3dn, SWL, MBL, SWL, MBL, d, l, w, p, TONS, TONS, TONS, TONS, KGS, 5, 25, 18, 15, 0.80, 3.20, 0.50, 6, 30, 21, 18, 1.10, 4.40, 0.44, 1.76, 0.83, 7.1, 35.5, 25, 21.3, 1.60, 6.40, 0.63, 2.52, 1.10, 8, 40, 28, 24, 2.00, 8.00, 0.80, 3.20, 1.40, 9, 45, 32, 27, 2.50, 10.00, 1.00, 4.00, 1.80, 10, 50, 35, 30, 3.20, 12.80, 1.25, 5.00, 2.10, 11, 55, 39, 33, 3.80, 15.20, 1.50, 6.00, 3.00, 12, 60, 42, 36, 4.60, 18.40, 1.80, 7.20, 3.10, 14, 70, 49, 42, 6.30, 25.20, 2.40, 9.60, 4.50, 16, 80, 56, 48, 8.00, 32.00, 3.20, 12.80, 5.60, 18, 90, 63, 54, 10.00, 40.00, 4.00, 16.00, 7.50, 20, 100, 70, 60, 12.50, 50.00, 5.00, 20.00, 9.00, 22, 110, 77, 66, 16.00, 64.00, 6.00, 24.00, 11.70, 25, 125, 88, 75, 20.00, 80.00, 7.80, 31.20, 14.00, 28, 140, 98, 84, 25.00, 100.00, 9.70, 38.80, 17.60, 32, 160, 112, 96, 32.00, 128.00, 12.70, 50.80, 23.40, 36, 180, 126, 108, 40.00, 160.00, 16.00, 64.00, 29.00, 40, 200, 140, 120, 50.00, 200.00, 19.80, 79.20, 36.00, 45, 225, 158, 135, 63.00, 252.00, 25.00, 100.00 45.00 GR80 Chains Confirm To Is : 6216/82 (Calibrated) & IS : 6215/82 (Non-Calibrated) GR30 Chains Confirm To Is : 2429/82 Part 2 (Calibrated) & IS : 2429/82 Part 1 (Non-Calibrated) Long link Chains Nominal Size, Outside Link Length, Outside Link Width, Pitch, Capacity, GR80, dn, 6dn, 3.6dn Max, 4dn, SWL, MBL, d, l, w, p, TONS, TONS, Actual, 13, 110, 55, 84, 1, 4, 16, 149, 63, 117, 3.2, 12.8, 18, 150, 69, 114, 4.25, 17, 20, 159, 75, 119, 5, 20, As per catalog, 13, 78, 47, 52, 0, 16, 96, 58, 64, 0, 18, 108, 65, 72, 0, 20, 120, 72, 80, 0, 22, 132, 79, 88, 24, 144, 86, 96, 26, 156, 93, 104, 28, 168, 101, 112, 30, 180, 108, 120, 32, 192, 115, 128
Chain Accessories Kentor Shackle Anchor Shackle
Sole selling agent in India of Jiangsu Asian Star Anchor Chain Co. Ltd. for Anchors Chains Common Link Enlarged Link Testing Load Of Stud Link Anchor Chain And Accessories Chain Dia. Grade2 Grade3 Approx. mass (27.5mm) chain Dia Grade2 Grade3 Approx. mass (27.5mm), Proof Load,Breaking Load,Proof Load,Breaking Load,Proof Load,Breaking Load,Proof Load,Breaking Load, c=0.0098,c=0.0137,c=0.0137,c=0.0196,c=0.0098,c=0.0137,c=0.0137,c=0.0196, mm,KN,KN,KN,KN,Kg,mm,KN,KN,KN,KN,Kg, 14,82,116, 116, 165, 130,64, 1560,2190,2190,3130,2529, 16,107,150,150,216,170,66,1660,2310,2310,3300,2689, 17.5,127,179,179,256,189, 68,1750,2450,2450,3500,2858, 19,150,211,211,301,226,70,1840,2580,2580,3690,3025, 20.5,175,244, 244, 349,263, 73,1990,2790,2790,3990,3341, 22,200, 280, 280, 401,303,76,2150,3010,3010,4300,3566, 24,237,332,332,476,370,78,2260,3160,3160,4500,3756, 26,278,389,389,556,439,81,2410,3380,3380,4820,4050, 28,321,449,449,642,496,84,2580,3610,3610,5160,4355, 30,368,514,514,735,564,87,2750,3850,3850,5500,4672, 32,417,583,583,833,635,90,2920,4090,4090,5840,5000, 34,468,655,655,937, 724,92,3040,4260,4260,6080,5224, 36,523,732,732,1050,812,95,3230,4510,4510,6440,5571, 38,581,812,812,1160,905,97,3340,4680,4680,6690,5809, 40,640,896,896,1280,1032,100,3530,4940,4940,7060,6174, 42,703,981,981,1400,1075,102,3660,5120,5120,7320,6423, 44,769,1080,1080,1540,1197,105,3850,5390,5390,7700,6806, 46,837,1170, 1170, 1680,1310,107,3980,5570,5570,7960,7067, 48,908,1270,1270,1810,1438,111,4250,5940,5940,8480,7606, 50,981,1370,1370,1960,1536,114,4440,6230,6230,8890, 8023, 52,1060,1480,1480,2110,1669,117,4650,6510,6510,9300,8450, 54,1140,1590,1590,2270,1780,120,4850,6810,6810,9720,8889, 56,1220,1710,1710,2430,1936,122,5000,7000,7000,9990,9187, 58,1290,1810,1810,2600,2086,124,5140,7200,7200,10280,9492, 60,1380,1940,1940,2770,2249,127,5350,7490,7490,10710,9957, 62,1470,2060,2060,2940,2373
Part #, Model, Holding, Power , Weight, (lbs), Boats Up To:, (20k Winds ), Chain, Dia., A, Height, B, Stock, Length, C, Fluke, Length, 94010, S 160, 160, 3.5, 10 Ft., 3'- 3/16", 17-1/4", 13", 9", 94011, S 00, 300, 5, 17 Ft., 3'- 3/16", 19-1/2", 14-3/4", 10-1/2", 94012, S 600, 600, 9, 27 Ft., 3'- 3/16", 24", 18-1/4", 12", 94013, S 920, 920, 14, 31 Ft., 4'- 1/4", 28-1/4", 21-1/2", 14-1/4", 94014, S 1300, 1300, 16, 36 Ft., 4'- 3/16", 31-3/4", 24", 16-1/2", 94015, S 1600, 1600, 25, 40 Ft., 5'- 5/16", 35", 26-3/4", 19", 94016, S 2000, 2000, 43, 45 Ft., 6'- 3/8", 40-1/4", 31", 22", 94017, S 3000, 3000, 70, 55 Ft., 8'- 1/2", 50", 38", 26-1/2", 94018, S 3500, 3500, 100, 60 Ft., 8'- 5/8", 54", 41", 30-1/2" * Tested under equivalent conditions and average bottom conditions
Chain Pulley Block 10000 kg.Chain Pulley Block 5000 kg. Chain Pulley Block Model HS-C 1/2 HS-C1 HS-C1 1/2 HS-C2 HS-C3 HS-C5 HS-C10 Capacitv Ton 0.5 1 1.5 2 3 5 10 Standard Lift m 3 3 3 3 3 3 3 Runnina test load Ton 0.75 1.5 2.25 3 4.5 7.5 3 Headroom (drawn closeup) mm 270 335 410 440 480 600 720 Effort required to lift max load N 160 314 363 324 333 412 412 No. of colums of load chain 1 1 1 2 2 2 4 Load chain dia. mm 5 6 8 6 8 10 10 A 110 142 178 142 178 210 367 Dimensions mm B 114 126 142 126 142 167 167 C 21.5 27 30 30 37 46 54 D 110 142 178 142 178 210 252 Net Weight kg 7 11 17 15 24 39 72 Gross weight kg 10 14 21 18 28 48 87 Inside Parts Light weight and sturdy Ease of handling Lifelong lubrication Minimal maintenance required Surface hardened gears Extended working life Use of needle roller bearings High operating efficiency Smooth passage of load chain Machine guide rollers Smooth hand chain operation Unique cover design Self sustaining maintenance free friction brake Reduce downtime Imported grade 80 load chain for strength and wear resistance Longer chain life Anti-corrosive powder coated finish Better aesthetics
Forged - Quenched and Tempered. Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk. Every Crosby Swivel hoist hook has a pre-drilled cam which can be equipped with a latch. Simply purchase the latch assemblies listed and snown on pages 89-91. Even years after purchase of the original hook, latch assemblies can be added. Load rating codes stamped on each hook. 322 Swivel Hooks use the same load rating code as 319 Shank Hooks, see page 84 for proper Hook Identification Codes. Hoist hooks incorporate markings forged into the product which address two QUICK-CHECK features: Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK measurement to determine if the throat opening has changed, thus indicating abuse or overload. Angle Indicators - Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs. Note Carbon swivel hooks.75tC-15tC: proofload is 2 times working load limit.Designed with a 5 to 1 safety factor. Alloy swivel hooks 1.5tA-22tA : proofload is 2.5 times working load limit. Designed with a 4 to Isafety factor. Alloy swivel hook 31.5tA: proofload is 2 times working load limit. Designed with a 4 to 1 safety factor.
Self Locking Hooks S-316N S-316A SHUR-LOC - Eye Hook Chain Size,S-316A Stock No.,Grade & Alloy chain working load limit(tons) 4:1,Wire Rope XIP IWRC Mechanical Splice,Weight each kg in,mm,size (mm),Working load limit (tons) 5:1 -,6,1097918,1.12,8,0.9,0.39 1/4-5/16,7-8,1097920,2.0,11,1.7,0.82 3/8,10,1097921,3.15,13,2.3,1.47 1/2,13,1097922,5.3,16,3.5,2.70 5/8,16,1097926,8.0,22,6.9,5.78 * Ultimate Load is 4 times the Working Load Limit based on Grade 8 Chain. Positive Lock Latch is Self-Locking when hook is loaded Forged Alloy Steel- Quenched and Tempered Rated for both Wire Rope and Grade 8 Chain Meets ASTM A-952-96 and proposed Euronorm standards for Grade 8 chain fitting Fatigue rated. The SHUR-LOC-hook, if properly installed and locked, can be used for personnel applications and meets the intent of OSHA Rule 1926.550 (g) (4) (iv) (B) G-414 Heavy Thimble should be used with wire rope slings Individually Proof Tested at 2-1/2 times the Working Load Limit with certification Trigger repair Kit available (5-4316). Consist of spring, roll pin and trigger Designed with Engineered Flat to connect to Grade . 8 chain fittings.
Eye Hooks For Wire Rope The most complete line of Eye hooks. Available 1/2 ton to 60 tons. Proper design, careful forging and precision controlled quench and tempering give maximum strength. Every Eye Hook has a pre-drilled cam which can be equipped with a latch. Eye hooks are load rated. Available in mild steel and alloy steel.
Single sheave with hook Sheave Size (in) Wire Rope Size (in) Capacity at F. OF S. 4:1 US tons Capacity at F. OF S. 2:1 US tons 4 1/2 3/8 - 1/2 2 1/2 5 6 3/4 8 16 6 3/4 12 24 8 3/4 8 16 8 3/4 12 24 8 1 1/8 22 44 10 5/8 - 3/4 8 16 10 3/4 12 24 10 1 1/8 22 44 12 5/8 - 3/4 8 16 12 3/4 12 24 12 1 1/8 22 44 14 3/4 12 24 14 1 1/8 22 44 Features Bearings The 4 1/2" Block is fitted with special bronze bush but can be fitted with taper roller bearings wIth special bronze bush if requested. Capacity The 4:1 capacity load given in the table are the maximum head fitting loads that should be applied to the Blocks.These capacity loads are based on a Fador of Safety of 4:1 and the Blocks are proof tested to twice this capacity load.The table also details a comparative capacity load at Fador of Safety2:1 so that the users may compare the 'High Load' Blocks with alternative makes based on this Lower Safety Fador. Double Sheave Light champion snatch block as a double sheave block. Drop forged swivel hook or swivel shackle. Can be furnished with bronze bushing and roller bearings. Opening features permits easy insertion of wire rope in both sheaveswith removal of one bolt. Can be furnished with hook latch. Pressurelube fittings. Fatigue rated.
Manilla Rope Pulley Block,, Dia. of Sheave, Dia of Rope, S. W. L. in kg, No. Sheave, 3 1/2, 1/2", 100, Single, 31/2, 1/2", 150, Double, 3 1-2, 1/2", 250, Triple, 4", 5/8, 150, Single, 4", 5/8, 200, Double, 4", 5/8, 300, Triple, 4 3/4, 3/4", 200, Single, 4 3/4, 3/4", 400, Double, 4 3/4, 3/4", 500, Triple, 6", 1", 500, Single, 6", 1", 1000, Double, 6", 1", 1500, Triple, 7", 1 1/4 600, Single, 7", 1 1/4, 1500, Double, 7", 1 1/4, 2000, Triple, 8", 1 1/2, 1000, Single, 8", 1 1/2, 2000, Double, 8", 1 1/2, 2500, Triple, 10", 2", 1500, Single, 10", 2", 2500, Double, 10", 2", 4000, Triple
Pool Type Anchor (CB 3221 - 84) Normal Weight, A, B, C, D, E, F 12, 385, 325, 275, 250, 65, 155, 20, 455, 385, 325, 300, 75, 185, 40, 570, 480, 410, 370, 95, 235, 60, 655, 555, 470, 425, 110, 270, 80, 720, 610, 515, 470, 120, 295, 100, 775, 655, 555, 505, 130, 320, 120, 825, 700, 595, 540, 135, 340, 160, 905, 765, 650, 590, 150, 370, 200, 975, 825, 700, 640, 160, 400, 240, 1040, 880, 745, 680, 175, 425, 280, 1090, 925, 780, 715, 180, 450, 320, 1140, 965, 820, 745, 190, 470, 360, 1190, 1005, 855, 780, 195, 490, 400, 1230, 1040, 885, 805, 205, 505, 440, 1270, 1075, 910, 830, 210, 90, 480, 1305, 1105, 940, 855, 215, 535, 520, 1340, 1135, 960, 875, 220, 550, 560, 1375, 1165, 985, 900, 230, 565, 600, 1410, 1195, 1010, 920, 235, 580, 640, 1440, 1220, 1035, 940, 240, 590, 720, 1495, 1265, 1075, 975, 250, 615, 800, 1550, 1310, 1115, 1015, 255, 635, 900, 1615, 1365, 1160, 1055, 270, 665, 1000, 1670, 1410, 1200, 1090, 275, 670, 1250, 1800, 1525, 1290, 1175, 300, 740, 1500, 1910, 1615, 1370, 1250, 315,
High Holding Anchor Sole selling agent in India of for Anchors Dazu Xingye Marine Casting Co. Ltd.
Sole selling agent in India of for Anchors Dazu Xingye Marine Casting Co. Ltd.