1) V series single pump and V series double pump.
20V/ 25V/ 35V/ 45V/ 50V 2520V/ 3520V/ 3525V/ 4520V/ 4525V/ 4535V.
2) VQ series single pump and VQ series double pump.
20VQ/ 25VQ/ 35VQ/ 45VQ 2520VQ/ 3520VQ/ 3525VQ/ 4520VQ/ 4525VQ/ 4535VQ.
3) V10 series vane pump and V20 series vane pump.
4 M series vane.
This bike trainer is a contraption for the bicycle, which enables to ride while standing on the support stand. This new folding support allows the actual feeling like the bike is on the road with more flexibility than any other support stand. Systemrotation speed determines the effort, more or less intense that is transmitted to the wheel. Everything happens inside an aluminium housing, with wide cooling fins for quick heat riding.
It 's the most common model, in addition we offer also some skeleton types with needle and u book, aluminium trigger, cast iron handle, with an anti-dip function, zinc alloy handle, some barrel type caulking guns with different features and also some plastic type epoxy caulking guns with different features.
24pcs/ box, small packing box (one piece)=34.5*30*20cm.
3512 Hydraulic Equipments Suppliers
Short on time? Let Hydraulic Equipments sellers contact you.
The hydraulic bucking unit is an important equipment for make-up/break-out, repairing all kinds of tools such as drill tools, pipe stems and downhole tools for petroleum and geological prospecting industries. It owns some advantages such as high automatic function, big make-up/breake-out torque, wide pipe diameter range, no sliding when make-up/break-out. Meanwhile, it also has good function for quick/make-up/break-out, axial pulling. Thebucking unit has got good reputation from customers domestic and abroad and well exported to many countries.
Hose crimping machine is mainly used for buckling processing for high pressure rubber pipe assembly in the mechanical engineering. It can also be used for buckling the two-way bends, especially large bends and irregular shape bends.
This machine features small and portable appearance, big force, low noise and easy to operate. The buckling amount can be precise adjusted through a scale. It makes the mould base division to be more even through the double inclined plane eight-flap mould seat equipped with a high accuracy guiding device.
Ii. Main technical feature
Buckling range: ª¦6í¬ª¦51mm
Max. Buckling force: 400t
Scale accuracy: 0.02mm
Rated pressure: 31.5 mpa
Oil pump displacement: 5ml/rad (380v); 2.5ml/rad (220v)
Overall dimensions: 670(l)íß490(w)íß780(h)mm
Electric hydraulic test pump is mainly used in hydrostatic test for various pressure containers, oxygen cylinder, pipe, valve and steam boiler. It is a device in the new technology of processing and high pressure source for liquids in the lab.
The hydraulic bucking unit is an important equipment for make-up / break- out, repairing all kinds of tools such as drill tools, pipe stems and downhole tools for petroleum and geological prospecting industries.
Motor power 15
Pipe dia. 73-310
Max. Make-up torque 115-150
We can provide such sizes as 1/8"HL,3.2*10.5mm, 3.2*12.5mm and 3/16"HL,4.8*12.5mm brake hoses of SAEJ1401 standard. The inner and outer layer of the hoses are made of EPDM, and reinforced by nylon layers.
Our hoses have passed 11 items of tests, such as visual inspection, pressure test, burst test, volumetric expansion, tensile test, flex whip test, and so on.
U-shape high rigidity cast steel hammer framework
Adjustable actinoid wide guide rails
The hammer tup and hammer frame work will strike each other with equal energy .
The weight of hammer framework is much heavier than hammer tup which ensure the working reliability.
The hydraulic dynamic system is designed in separately side-set and centralized control
It has man-machine conversation screen, automatically diagnosing the malfunction and showing in Chinese or English.
Striking energy controlling and programmed striking controlling can be realized
Performance and Feature
High efficiency, energy saving. The usage of energy can up to 65% while the striking efficiency can up to 95%.
U-shape hammer framework with high rigidity and high accuracy, adjustable actinoid wide guide rail structure as well as exactly controlling of striking energy are the preliminary condition of accurately forging.
Less or no vibration. The hammer tup and hammer frame will strike each other with equal energy. When the hammer works, there is less or no vibration which is suitable for the requirement of environmental protection.
Fewer investment. The hammer not only has a higher cost performance but also can reduce the investment of workshop and vibration insulation foundation.
Lower using cost. Effectively controlling the striking energy can lessen the vibration, reduce the noise, improve the equipmentíªs reliability as well as extend the die-life.
packed by wooden cases
different hammer has different size
Basic structure:
Highly integrated fully hydraulic driving system;
Digital input, Chinese and English display, programmal control system;
hydraulic coupling system (upper and lower tup counterblow in the midair with equal stroke and speed);
striking system with precision guide for upper and lower tup;
auxiliary hydraulic systems for guide rails automatic lubrication, hydraulic oil temperature automatic control and filtration;
Compact construction with hydraulic driving systems on the top and damping vibration isolation system at the bottom;
Two ejectors with overload protection in the lower tup
Performance Characteristics:
High accuracy. Striking energy and step can be controlled accurately;
Automatic operation. It can be operated with robot to realize automation.
Less or no vibration. Upper and lower tup counterblow in the midair with equal energy completely avoids impact to the foundation;
High efficiency and energy saving. Energy utilization ratio can be up to 65% and striking efficiency can be up to 95%;
Fewer investment. The cost of workshop and isolated foundation will fall a lot and it has a high cost performance ;
Lower using cost. Effective control of the striking energy can improve forging hammerí»s reliability and improve die life.
Packed by wooden cases
Different hammer has different size.
Baixie hammers become more and more popular. The forging hammers are widely applied in producing automobile parts, motorcycle parts, hydraulic tubes, hardwares, surgical instruments, hand-tools, stainless steel tableware, spaceflight industry; they are also the ideal equipment of manufacturing abnormal parts, such as, connecting rods, bend axes, rockers, fork, stainless steel knives and forks to forge and form precisely, and at the same time the die forging hammers can be operated with robots to realize automation.
Package by wooden cases
Differnet hammer has different size.
Fully hydraulic driving
Striking controlled by programmable controller and digital inputting.
U-shape integrated cast steel construct of hammer frame
Actinoid wide guide rails construct
Elastic thin hammer rod
Man-machine conversation screen and automatically displaying malfunction
The hydraulic knockout system and shock absorbers can be supplied according to the customeríªs requirement.
Advantage of CHK
High efficiency low energy cost high operating reliability and safety
Firmness durability good rigidity and high accuracy
The striking energy and striking sequence can be set optionally
Quickly return speed without closing the die
Simplified and flexible operation
Application
Suitable for the products with small batch.
Suit to forge abnormity parts exactly.
Suit to forge with several mold cavity and closed die forging.
Suitable for powder forging alloy steel forging and non-ferrous metal forging.
package by wooden cases
different hammer have different size
It is obvious economically to innovate out-of-date steam hammer into hydraulic power tup, this is called model ctk plc fully-hydraulic die forging hammer, which can save much cost comparing to buying a new set fully-hydraulic die forging hammer.
Basal construct
It has high integrated fully hydraulic driving system, and no need of pump chamber and hydraulic station on the ground
Striking can be controlled by programmable controller and digital inputting
Long hammer tup construct can enhance the working accuracy
Striking energy and striking sequence can be set optionally; no surplus striking energy which can avoid noise and increase the die life
It has man-machine conversation screen, automatically diagnosing the malfunction and showing in chinese or english.
Performance and feature
High efficiency and energy saving
Constant quality of forging parts
Lower run cost
Wide application
Lower investment cost
Easy maintenance and operation
Package by wooden cases
Different hammers has different size
Operating Pressure: 68.8 Mpa or 10,000 psi
Output Force : 25 Ton
Capacity: Busbar 160x13mm
Locating clamp can insure the cutting angleof 90 can be used together with the punching guide plate
front an back material feeding tumbling box
V-type cutting edge can insure the cut surface not hollow to obtain the virtual contact area.
3512 Hydraulic Equipments Suppliers
Short on time? Let Hydraulic Equipments sellers contact you.
