MATERIAL DESCRPTION The Areca palm (Areca Catechu Linn), is extensively cultivated in South India as a cash crop, gives a strong and supple material that is amenable to various shaping. This product is obtained from the plant leaf part, which in the course of its biological life cycle, dries, falls and degenerates. The naturally shed leaf sheath is strong, odorless, water and heat resistant. Areca palm leaf sheath has its own natural grains and characteristic texture, very much similar to those seen in furniture grade wood. The outer surface of the sheath is greenish or brown, waxy and tough, while the inner surface is creamy in color and has natural grains and glossy finish. An added advantage with this material is that it can be used to bake foodstuff and can even tolerate microwave cooking. With such amazing properties, this raw material has been used to manufacture a variety of items of day-to-day use such as disposable plates. The entire manufacturing process uses no chemicals, resins, and dyes, strengthening agents or synthetic materials whatsoever. Areca palm leaf plates are totally safe and non toxic. PRODUCTION PROCESS 1. Freshly fallen, naturally discarded sheath leaves of the Areca palm tree are collected. These leaves / sheaths are neither pulled off the tree nor are any trees cut down, as this is a non-timber forest resource. The trees naturally shed their old leaves, which are then picked up and put into good use. 2. Each raw sheath is then thoroughly washed with pressure water jets to remove any clinging dirt. It is then hand washed in pure water. The leaves are then rinsed third time in fresh water. 3. Once clean, the palm sheaths are allowed to air dry. 4. The clean & dry palm leaves are then molded into various shapes using heated press. Multiple plates of different shapes and sizes are often cut from each leaf in order to reduce waste. 5. Once pressed into shape, each plate is further cleaned with air jet to remove any dust produced in the cutting process. 6. Cleaned plates are packed in 25 pieces / unit and shrink wrapped. 7. The adhesive label with the description of product is sticked to each unit. 8. Conveniently dried and stored in dry place. 9. Shelflife is more than 8 years , if kept under normal room temperature. Additional feature s. 1. Suitable for hot /cold dishes, gravy, curry etc 2. Safe to use in microwave oven 3. Can withstand temperature up to 120*C 4. Suitable for refrigerator use 5. Gets fully decomposed in soil within 30 to 45 days.
The Areca palm (Areca Catechu Linn), is extensively cultivated in South India as a cash crop, gives a strong and supple material that is amenable to various shaping. This product is obtained from the plant leaf part, which in the course of its biological life cycle, dries, falls and degenerates. The naturally shed leaf sheath is strong, odorless, water and heat resistant. Areca palm leaf sheath has its own natural grains and characteristic texture, very much similar to those seen in furniture grade wood. The outer surface of the sheath is greenish or b rown, waxy and tough, while the inner surface is creamy in color and has natural grains and glossy finish. An added advantage with this material is that it can be used to bake foodstuff and can even tolerate microwave cooking. With such amazing properties, this raw material has been used to manufacture a variety of items of day-to-day use such as disposable plates. The entire manufacturing process uses no chemicals, resins, and dyes, strengthening agents or synthetic materials whatsoever. Areca palm leaf plates are totally safe and non toxic. How Areca palm leaf plates are made Freshly fallen, naturally discarded sheath leaves of the Areca palm tree are collected. These leaves / sheaths are neither pulled off the tree nor are any trees cut down, as this is a non-timber forest resource. The trees naturally shed their old leaves, which are then picked up and put into good use. Each raw sheath is then thoroughly washed with pressure water jets to remove any clinging dirt. It is then hand washed in pure water. The leaves are then rinsed third time in fresh water. Once clean, the palm sheaths are allowed to air dry. The clean & dry palm leaves are then molded into various shapes using heated press. Multiple plates of different shapes and sizes are often cut from each leaf in order to reduce waste. Once pressed into shape, each plate is further cleaned with air jet to remove any dust produced in the cutting process. Cleaned plates are packed in 25 pieces units and shrink wrapped. Further packed into corrugated carton box as per customer packing requirement. Additional Features Suitable for hot /cold dishes, gravy, curry etc Microwave oven friendly. Withstand temperature up to 120*C Suitable for refrigerator use. Gets fully decomposed in soil within 30 to 45 days and acts as organic manure.
The Areca palm (Areca Catechu Linn), is extensively cultivated in South India as a cash crop, gives a strong and supple material that is amenable to various shaping. This product is obtained from the plant leaf part, which in the course of its biological life cycle, dries, falls and degenerates. The naturally shed leaf sheath is strong, odorless, water and heat resistant. Areca palm leaf sheath has its own natural grains and characteristic texture, very much similar to those seen in furniture grade wood. The outer surface of the sheath is greenish or brown, waxy and tough, while the inner surface is creamy in color and has natural grains and glossy finish. An added advantage with this material is that it can be used to bake foodstuff and can even tolerate microwave cooking. With such amazing properties, this raw material has been used to manufacture a variety of items of day-to-day use such as disposable plates. The entire manufacturing process uses no chemicals, resins, and dyes, strengthening agents or synthetic materials whatsoever. Areca palm leaf plates are totally safe and non toxic. How Areca palm leaf plates are made? Freshly fallen, naturally discarded sheath leaves of the Areca palm tree are collected. These leaves / sheaths are neither pulled off the tree nor are any trees cut down, as this is a non-timber forest resource. The trees naturally shed their old leaves, which are then picked up and put into good use. Each raw sheath is then thoroughly washed with pressure water jets to remove any clinging dirt. It is then hand washed in pure water. The leaves are then rinsed third time in fresh water. Once clean, the palm sheaths are allowed to air dry. The clean & dry palm leaves are then molded into various shapes using heated press. Multiple plates of different shapes and sizes are often cut from each leaf in order to reduce waste. Once pressed into shape, each plate is further cleaned with air jet to remove any dust produced in the cutting process. Cleaned plates are packed in 25 pieces units and shrink wrapped. Further packed into corrugated carton box as per customer packing requirement. Additional Features Suitable for hot /cold dishes, gravy, curry etc Microwave oven friendly. Withstand temperature up to 120*C Suitable for refrigerator use. Gets fully decomposed in soil within 30 to 45 days and acts as organic manure.
Name, Dimension & Specs : 14" Oval Platter 14 Inch / 35 Cm Length 9.5 Inch / 24 Cm Width 0.75 Inch / 2 Cm Depth Narrow Rim Price Per Piece In Usd : 0.31 Cbm/ctn 100 Pcs : 0.0568
Name, Dimension & Specs 12" Oval Platter Small 12 Inch /30.5 Cm Length 7.5 Inch / 19 Cm Width 0.75 Inch / 2 Cm Depth Narrow Rim Price Per Piece In Usd : 0.25 Cbm/ctn 100 Pcs : 0.0385
Name, Dimension & Specs : 12" Oval 12 Inch / 30 Cm Length 7 Inch / 17.78 Cm Width 1 Inch / 2.50 Cm Depth Rimless Price Per Piece In Usd : 0.18 Cbm/ctn 100 Pcs : 0.0351
Name, Dimension & Specs : 10" Oval 10 Inch / 25 Cm Length 6.5 Inch / 16.50 Cm Width 10" Oval 0.75 Inch / 1.90 Cm Depth Rimless Price Per Piece In Usd : 0.21 Cbm/ctn 100 Pcs : 0.0252
Name, Dimension & Specs : 6.5" Oval 6.5 Inch / 16.5 Cm 5.5 Inch / 12.70 Cm Width 0.75 Inch / 1.90 Cm Depth Price Per Piece In Usd : 0.13 Cbm/ctn 100 Pcs : 0.0128
Name, Dimension & Specs : 12" X 10" Rectangle Platter 12 Inch / 30 Cm Length 10 Inch / 25 Cm Width 0.50 Inch /1.27 Cm Depth Rimless Price Per Piece In Usd : 0.27 Cbm/ctn 100 Pcs : 0.0402
Name, Dimension & Specs 10" Rectangle 10 Inch / 25 Cm Length 6.5 Inch / 16.5 Cm Width 1.25 Inch / 3.17 Cm Depth Rimless Price Per Piece In Usd : 0.18 Cbm/ctn 100 Pcs : 0.0278
Name, Dimension & Specs : 10" Partition Recatnagle 10 Inch / 25 Cm Length 6.5 Inch / 16.5 Cm Width 1.25 Inch / 3.17 Cm Depth Rimless Price Per Piece In Usd : 0.23 Cbm/ctn 100 Pcs : 0.0278
Name, Dimension & Specs : 10 " Narrow Rectangle 10 Inch / 25 Cm Length 4.5 Inch / 11.5 Cm Width 1.25 Inch / 3.17 Cm Depth Rimless Price Per Piece In Usd : 0.19 Cbm/ctn 100 Pcs : 0.0258
Name, Dimension & Specs : 8" Rectangle 8 Inch / 20 Cm Length 5.5 Inch / 14 Cm Width 1.25 Inch / 3.17 Cm Depth With Rim Price Per Piece In Usd : 0.15 Cbm/ctn 100 Pcs : 0.0192
Name, Dimension & Specs : 6" Rectangle 6 Inch / 15 Cm Length 5.25 Inch / 13.33 Cm Width 1.25 Inch / 3.17 Cm Depth Rimless Price Per Piece In Usd : 0.13 Cbm/ctn 100 Pcs : 0.0152
Name, Dimension & Specs : 12" Round 12 Inch / 30 Cm Diameter 1 Inch / 2.50 Cm Depth Rimless Shallow Design Price Per Piece In Usd : 0.31 Cbm/ctn 100 Pcs : 0.0537
Name, Dimension & Specs : 10" Round 10 Inch / 25cm Diameter 1 Inch / 2.50 Cm Depth Rimless Shallow Design Price Per Piece In Usd : 0.19 Cbm/ctn 100 Pcs : 0.0379
Name, Dimension & Specs : 8.5" Round 8.5 Inch / 21.60 Cm Diameter 0.8 Inch / 2 Cm Depth Rimless Shallow Design Price Per Piece In Usd : 0.16 Cbm/ctn 100 Pcs : 0.0310
Name, Dimension & Specs : 8" Round 8 Inch / 20 Cm Diameter 1 Inch / 2.50 Cm Depth With Rim Classic Style Price Per Piece In Usd : 0.16 Cbm/ctn 100 Pcs : 0.0260
Name, Dimension & Specs : 7" Round Side Plate 7 Inch / 18 Cm Diameter Flat Round 0.75 Inch / 1.90 Cm Depth Rimless Price Per Piece In Usd : 0.15 Cbm/ctn 100 Pcs : 0.0178
Name, Dimension & Specs : 6" Round Bowl 6 Inch / 15 Cm Diameter 1 Inch / 2.50 Cm Depth With Rim Classic Style Price Per Piece In Usd : 0.14 Cbm/ctn 100 Pcs : 0.0145