Polymer flocculant is a kind of polymer compound that can make the impurity particles dispersed in the liquid phase coagulate and settle, which is polymerised by organic flocculant. Features and advantages High efficiency: polymer flocculant can quickly and effectively coagulate the suspended matter, colloid and other impurities in water into larger particles, which is convenient for subsequent sedimentation and filtration. Wide adaptability: polymer flocculant adapts to a wide range of pH value, no corrosive effect on pipeline equipment, applicable to a variety of water quality conditions. Strong decolourisation and decontamination: polymer flocculant has strong decolourisation and decontamination ability, which can significantly improve the clarity and transparency of water. Small dosage, low cost: polymer flocculant is used in small dosage, but the effect is significant, and can reduce the cost of treatment. Application field It is mainly used in the purification of drinking water and the treatment of industrial wastewater, including the treatment of oily wastewater, printing, dyeing and papermaking wastewater, smelting wastewater and other special water quality. In addition, it also has a wide range of uses in precision casting, oil drilling, tanning, metallurgy and paper making. Specifically, polymer flocculant can play the role of clarification and purification, settlement promotion, sludge dewatering, papermaking auxiliaries, filtration promotion and so on.
1. Good water purification effect: PAC forms large flocs, fast settling speed, which can significantly improve the water clarity and remove suspended matter, organic matter, heavy metal ions in water. 2. Strong adaptability: the adaptability of polymeric aluminium chloride has a wide range of pH value, strong adaptability to the raw water, and can deal with various types of water quality. 3. Less dosage: compared with other coagulants, the dosage of polymeric aluminium chloride is less, which can reduce the cost. 4. Small corrosiveness: the corrosiveness of polymeric aluminium chloride is relatively small, and the influence on equipment and pipeline is small. 5. Easy to operate and manage: the solubility of polymeric aluminium chloride is good, it is easy to mix well with water, and it will not produce harmful gases and substances in the process of using, the operation and management is relatively simple.
Water treatment chemicals .
Drinking water grade polymeric aluminium chloride produced by Xinhuan Water Treatment is produced by spray drying process (powder) and roller drying type (granule). It is produced with high quality raw materials such as aluminium hydroxide, hydrochloric acid and calcium aluminate powder. The technical standard is in line with the national GB15892-2020 standard, and the appearance of the product is yellow powder or granule. The product can remove bacteria, deodorant, fluorine, aluminium, chromium, oil, turbidity, heavy metal salts, in addition to radioactive pollutants, in the process of purifying a variety of water sources have a wide range of uses. It is suitable for drinking water, city water supply and drainage, circulating cooling water and paper making sizing precipitant, sugar decolouring and clarifying agent.
This machine main apply in the field of power plant pipeline installation, especially pipeline prefabrication and low clearance on site working, such as maintain thermal power auxiliary equipment, boiler pipe valve. Adopt METABO motor: low noise, long life, stable performance and perfect speed adjustable function, with CE certificate. METABO Motor: 1300W 6.0A. Features: 1)Compact structure, designed to bevel the pipe in the narrow space. 2)Pipe Out-mounted , self centering, secured clamping, easy to operate. 3)Aluminum body, light weight, suitable for working aloft. 4)Ingenious centering device, high quality beveling tool, can process different grades of carbon steels, alloyed steel, stainless steel and so on. 5)More choice for the driven model, electric or pneumatic, widely application. 6)Using fields: Pipe end beveling process of water pipe, heater boiler and thermal power plant. 7)Easy operation: Tool feed, tool back automatically 8)Well-adapted, make the speed adjust depend on the working conditions.
The portable tube squaring machine is specially designed to flatten and bevel tube end, making it burr-free, and perfect straight to the axis of the tube. After facing, the tube would be ready for orbital welding or other tube fabrication, ideal for high purity / high sanitary industry use, such as beverage, dairy, pharmaceutics, water treatment, food, semi-conductor industry etc. Feature: * Faces and Bevel most metals including stainless steel, nickel and carbon steels, , chrome, copper-nickel alloy, aluminum * Wide range of collets (clamp)/ OD Mounting Saddles available, to avoid any tube distortion * Three Square Devil model available, to work on tube from 1/8â?? OD to 4 1/2â?? OD * High quality collets made from stainless steel rather than aluminum * Can face and bevel tube wall thickness up to 10mm * 110/220 V powerful Metabo electrical motor * Micro feed system * Supply full range of bevel and squaring Bit
production The pipe cutting machine is easy to operate and save space. Fix the pipe to be cut on the "self-centering" clamping device, the pipe will not be deformed, and the cutting speed can be quickly adjusted according to the diameter of the pipe. Hold the cutting head around the pipe once, and rotate the toothed blade to cut the pipe without burrs, deformation, and vertical cut. Cutting sanitary stainless steel clean pipes has unique advantages. It is the best choice for direct welding of stainless steel pipes in industries such as beer, beverages, dairy products, pharmaceuticals, daily chemicals, semiconductor optoelectronics, biology, chemicals, oil and gas, water treatment, shipbuilding, and electric power. The cutting hole of the steel pipe can also be completed at the same time, with high efficiency and good quality. Operating procedure: The cutting is performed by manually rotating the machine to cut the pipe 360 degrees, and cut with a round tooth blade driven by a 1600 watt motor. The pipe was cut after a 360-degree rotation. This powerful and stable electric motor is equipped with 6 speeds to choose from. Advantages: * Precise right angle cut * Cold cut to prevent thermal distortion * Fast pipe clamping, deformation-free clamping system * Easy set op regardless of the diameter * Easy execution of the cut * Just a few seconds to fnish the cut with one single rotation arou * Simultaneous cutting and beveling with beveling blade mounted * Cutting speed regulation suitable for each wall thickness pipe
Polyacrylamide for oilfield produced by Xinhuan Water Treatment is a special chemical which is widely used in oilfield engineering. It has the characteristics of high temperature and high salt resistance, it has excellent adsorption, aggregation and gelling properties, in the oilfield treatment, not only can clean up the oil stains in the water, at the same time, it can also help the enterprise to improve the efficiency of oil extraction and production, so that it can be widely used in the construction of the oilfield since. Product Features 1ã??It can adsorb organic substances such as oil and grease and surfactants in the oilfield to form stable colloidal particles and improve the fluidity of water. This adsorption ability makes it play a key role in oilfield development. 2ã??It can gather broken oil, suspension and particles into larger precipitating bodies, thus facilitating settling and separation. In oilfield development, polyacrylamide for oil recovery can be added to the water injection, and through the interaction with the oil-water interface, it can form the conditions for oil-water separation and improve the oil recovery effect of oil wells. 3ã??It can promote the aggregation of oil and grease in the oil-bearing layer to form larger oil droplets, and improve the oil recovery rate and production of oil wells. It can improve the tension and viscosity of oil-water interface, enhance the separation effect between oil droplets and water phase, and effectively increase the oil production capacity of oil wells. 4ã??It can gelate with solid particles and fibrous polymers in water to form a stable gel structure. In oilfield engineering, polyacrylamide for oil recovery can be used to solidify sediments, strengthen drilling mud and reinforce well walls. 5. It can be used to fill oil well gaps and repair problems such as drilling difficulties. At the same time, it can also reduce the osmotic pressure difference in the extraction process and improve the oil recovery effect and production.
Cationic polyacrylamide (CPAM) produced by Xinhuan Water Treatment is a linear polymer compound, which can form hydrogen bond with many substances by affinity and adsorption due to its various active groups. It is mainly used to flocculate negatively charged colloids, and is suitable for the treatment of wastewater rich in organic matter. It is suitable for wastewater treatment with high organic colloid content in industries such as printing and dyeing, papermaking, food, construction, metallurgy, mineral processing, coal dust, oil field, aquatic processing, aquaculture, fermentation, etc. It is especially suitable for dewatering industrial sludge such as urban sewage, municipal sludge and paper sludge. Application: The product is widely used in the treatment of chemical industry wastewater, waste liquid and urban sewage treatment, sludge dewatering.
Anionic polyacrylamide(APAM) series products are water-soluble linear polymers synthesized with high polymerization degree, easily soluble in water, almost insoluble in benzene, ether, lipids, acetone and other general organic solvents. The anionic polyacrylamide produced by Xinhuan Water Treatment can be used as coagulant aid, retention agent, sludge dewatering agent and coagulation precipitant. Because its molecular chain contains a certain number of polar groups, it can adsorb the suspended solid particles in water, make the bridge between particles or make the particles coalesce to form large flocs through charge neutralisation, so it can accelerate the settlement of the particles in the suspension, and it has the effect of accelerating the clarification of the solution and promoting the filtration, etc. Anion Polyacrylamide is mainly used to purify drinking water and domestic sewage, purify industrial sludge and dewatering agent and coagulation and sedimentation agent. It is mainly used to purify drinking water and domestic sewage; purify industrial water and industrial wastewater; purify mine and oilfield re-injection water; purify papermaking, electroplating, electronics, dyeing and finishing, pharmaceuticals, metallurgy, coal washing, tannery and various chemical wastewater. The most suitable type of product should be selected according to the conditions and water quality of the system to be treated.
Polyacrylamide (PAM) produced by Xinhuan is a water-soluble polymer, insoluble in most organic solvents, with good flocculation effect. According to the different ionic properties, it can be divided into three major types: anionic, cationic and nonionic. In neutral alkaline media, it is characterised by polymer electrolytes, sensitive to salt electrolytes, and crosslinked with high-valent metal ions to form insoluble gels. Cationic polyacrylamide (CPAM) Model: XH floc C8063, XH floc C8072, XH floc C8162, XH floc C8193, XH floc C8232 , XH floc C8303, XH floc C8373, XH floc C8472, XH floc C8503, XH floc C8642 Anionic Polyacrylamide(APAM) Models: xh floc a9025, xh floc a9010, xh floc a9015, xh floc a9080, xh floc a9060 Nonionic Polyacrylamide(NPAM) Models: XH floc N9160
white polyaluminium chloride produced by Xinhuan Water Treatment is made by high-pressure reaction of aluminium hydroxide powder and high-purity hydrochloric acid. Its solid is white powder, and its 10% aqueous solution is a colourless transparent liquid. It is easily soluble in water, and during the hydrolysis process, it is accompanied by electrochemical, condensation, adsorption and other processes, and has a strong bridging adsorption effect. It is widely used in papermaking, medicine, daily chemicals, cosmetic additives and drinking water purification.
Polyferric Sulfate(PFS), also known as Polymeric Ferric Sulfate and Polyferric Sulphate, is an iron-based inorganic polymer coagulant. The solid is light yellow powder and is easily soluble in water; the aqueous solution is a reddish brown transparent solution. It has the advantages of high hygroscopicity, extremely high flocculation ability, fast sedimentation rate and wide application range. Poly ferric sulfate has stable performance, excellent water purification effect and does not contain heavy metal ions and other harmful substances. It has the functions of decolourisation, deodorisation, deodorisation, odour removal, removal of heavy metal ions, radioactive substances and carcinogenic substances in water. The removal rate of COD, BOD and chromaticity is above 90%. It has good purification effect on low temperature, low turbidity and high turbidity raw water. Poly ferric sulphate can also be used as phosphorus remover. Compared with other inorganic flocculants, the treatment cost can be reduced by 20% - 50%. Widely used in thermal power plants, coking plants, paper mills, printing and dyeing plants, electroplating plants, chemical plants and other heavily polluted wastewater treatment (because of its pH range is wider than that of polymeric aluminium chloride, suitable for pH value fluctuation of water quality).
Polyaluminium chloride(PAC), as a polymer water purification material, is an inorganic polymer coagulant, referred to as PAC, polyaluminium, polyaluminum chloride, aluminum polychloride, Polymeric aluminum chloride.  Industrial-grade PAC adopts the most advanced spray drying production process and is made by polymerization of high-quality raw materials. The product has the advantages of flocculation and fast precipitation: good stability, wide adaptability to water, fast hydrolysis, strong adsorption capacity, formation of alumina flowers, dense precipitation, low effluent turbidity, good dehydration performance, etc. As the most effective water treatment chemicals, widely used in water treatment and drinking water, industrial water and sewage, wastewater treatment and other fields.
Melamine is mainly used for manufacturing melaminoformal dehyde resin, which is well water, heat & arc resistant and bright. It can also be used in decorative laminates, aminoplastics, adhesive agents, coatings and used as a paper reinforcing agent, textile auxiliaries, cement water-reducing agent and leather retaining agent etc.
Ester alcohol C-12 is premier coalescent for latex paints,especially performs well in all kinds of acrylic acid ester,styrene,vinylacetate as raw materials and synthesis of various latex agent and other water-based paint system.
Hongye Chemical Co., Ltd is the leading professional manufacturer and supplier of Thiourea Dioxide and pulp bleaching agent FAS. We can produce 50000MT Thiourea Dioxide(Formamidine sulfinic acid) &pulp bleaching agent FAS. Pulp bleaching agent FAS is one kind excellent pulp and paper bleaching agent, it can be used in reduction bleaching,waster paper deink bleaching. It is very stable in air and can be used under the normal equipments. Because of high reducibility and good stability, it is very suitable for high temperature continual bleaching, and there is good for environment, does not increase the waste water pollution load, conforms to the environmental protection requirements.