Polymer flocculant is a kind of polymer compound that can make the impurity particles dispersed in the liquid phase coagulate and settle, which is polymerised by organic flocculant. Features and advantages High efficiency: polymer flocculant can quickly and effectively coagulate the suspended matter, colloid and other impurities in water into larger particles, which is convenient for subsequent sedimentation and filtration. Wide adaptability: polymer flocculant adapts to a wide range of pH value, no corrosive effect on pipeline equipment, applicable to a variety of water quality conditions. Strong decolourisation and decontamination: polymer flocculant has strong decolourisation and decontamination ability, which can significantly improve the clarity and transparency of water. Small dosage, low cost: polymer flocculant is used in small dosage, but the effect is significant, and can reduce the cost of treatment. Application field It is mainly used in the purification of drinking water and the treatment of industrial wastewater, including the treatment of oily wastewater, printing, dyeing and papermaking wastewater, smelting wastewater and other special water quality. In addition, it also has a wide range of uses in precision casting, oil drilling, tanning, metallurgy and paper making. Specifically, polymer flocculant can play the role of clarification and purification, settlement promotion, sludge dewatering, papermaking auxiliaries, filtration promotion and so on.
1. Good water purification effect: PAC forms large flocs, fast settling speed, which can significantly improve the water clarity and remove suspended matter, organic matter, heavy metal ions in water. 2. Strong adaptability: the adaptability of polymeric aluminium chloride has a wide range of pH value, strong adaptability to the raw water, and can deal with various types of water quality. 3. Less dosage: compared with other coagulants, the dosage of polymeric aluminium chloride is less, which can reduce the cost. 4. Small corrosiveness: the corrosiveness of polymeric aluminium chloride is relatively small, and the influence on equipment and pipeline is small. 5. Easy to operate and manage: the solubility of polymeric aluminium chloride is good, it is easy to mix well with water, and it will not produce harmful gases and substances in the process of using, the operation and management is relatively simple.
Water treatment chemicals .
Polyacrylamide (PAM) produced by Xinhuan is a water-soluble polymer, insoluble in most organic solvents, with good flocculation effect. According to the different ionic properties, it can be divided into three major types: anionic, cationic and nonionic. In neutral alkaline media, it is characterised by polymer electrolytes, sensitive to salt electrolytes, and crosslinked with high-valent metal ions to form insoluble gels. Product Features 1. Flocculation: PAM can make suspended matter flocculate through electrical neutralization, bridging adsorption. 2. Adhesion: It can act as an adhesive through mechanical, physical and chemical effects. 3. Resistance reduction: PAM can effectively reduce the friction resistance of the fluid. Adding a trace of PAM to water can reduce resistance by 50-80%. 4. Thickening: PAM has a thickening effect under neutral and acidic conditions. When the pH value is above 10, PAM is easily hydrolyzed. When it is a semi-net structure, the thickening will be more obvious.
Polyacrylamide (PAM) produced by Xinhuan is a water-soluble polymer, insoluble in most organic solvents, with good flocculation effect. According to the different ionic properties, it can be divided into three major types: anionic, cationic and nonionic. In neutral alkaline media, it is characterised by polymer electrolytes, sensitive to salt electrolytes, and crosslinked with high-valent metal ions to form insoluble gels. Product Features 1. Flocculation: PAM can make suspended matter flocculate through electrical neutralization, bridging adsorption. 2. Adhesion: It can act as an adhesive through mechanical, physical and chemical effects. 3. Resistance reduction: PAM can effectively reduce the friction resistance of the fluid. Adding a trace of PAM to water can reduce resistance by 50-80%. 4. Thickening: PAM has a thickening effect under neutral and acidic conditions. When the pH value is above 10, PAM is easily hydrolyzed. When it is a semi-net structure, the thickening will be more obvious.
Polyacrylamide (PAM) produced by Xinhuan is a water-soluble polymer, insoluble in most organic solvents, with good flocculation effect. According to the different ionic properties, it can be divided into three major types: anionic, cationic and nonionic. In neutral alkaline media, it is characterised by polymer electrolytes, sensitive to salt electrolytes, and crosslinked with high-valent metal ions to form insoluble gels. Product Features 1. Flocculation: PAM can make suspended matter flocculate through electrical neutralization, bridging adsorption. 2. Adhesion: It can act as an adhesive through mechanical, physical and chemical effects. 3. Resistance reduction: PAM can effectively reduce the friction resistance of the fluid. Adding a trace of PAM to water can reduce resistance by 50-80%. 4. Thickening: PAM has a thickening effect under neutral and acidic conditions. When the pH value is above 10, PAM is easily hydrolyzed. When it is a semi-net structure, the thickening will be more obvious.
Polyacrylamide (PAM) produced by Xinhuan is a water-soluble polymer, insoluble in most organic solvents, with good flocculation effect. According to the different ionic properties, it can be divided into three major types: anionic, cationic and nonionic. In neutral alkaline media, it is characterised by polymer electrolytes, sensitive to salt electrolytes, and crosslinked with high-valent metal ions to form insoluble gels. Product Features 1. Flocculation: PAM can make suspended matter flocculate through electrical neutralization, bridging adsorption. 2. Adhesion: It can act as an adhesive through mechanical, physical and chemical effects. 3. Resistance reduction: PAM can effectively reduce the friction resistance of the fluid. Adding a trace of PAM to water can reduce resistance by 50-80%. 4. Thickening: PAM has a thickening effect under neutral and acidic conditions. When the pH value is above 10, PAM is easily hydrolyzed. When it is a semi-net structure, the thickening will be more obvious.
Poly Aluminium Chloride (PAC) is an advanced inorganic polymeric water treatment agent. It exhibits strong flocculating and adsorbing properties, making it effective in removing suspended particles, colloids, and some dissolved substances from water. PAC is widely used in drinking water, industrial water purification, and sewage treatment due to its high efficiency and ease of use.
Poly Aluminium Chloride (PAC) is an advanced inorganic polymeric water treatment agent. It exhibits strong flocculating and adsorbing properties, making it effective in removing suspended particles, colloids, and some dissolved substances from water. PAC is widely used in drinking water, industrial water purification, and sewage treatment due to its high efficiency and ease of use.
Poly Aluminium Chloride (PAC) is an advanced inorganic polymeric water treatment agent. It exhibits strong flocculating and adsorbing properties, making it effective in removing suspended particles, colloids, and some dissolved substances from water. PAC is widely used in drinking water, industrial water purification, and sewage treatment due to its high efficiency and ease of use.
Poly Aluminium Chloride (PAC) is an advanced inorganic polymeric water treatment agent. It exhibits strong flocculating and adsorbing properties, making it effective in removing suspended particles, colloids, and some dissolved substances from water. PAC is widely used in drinking water, industrial water purification, and sewage treatment due to its high efficiency and ease of use.
Poly Aluminium Chloride (PAC) is an advanced inorganic polymeric water treatment agent. It exhibits strong flocculating and adsorbing properties, making it effective in removing suspended particles, colloids, and some dissolved substances from water. PAC is widely used in drinking water, industrial water purification, and sewage treatment due to its high efficiency and ease of use.
white polyaluminium chloride produced by Xinhuan Water Treatment is made by high-pressure reaction of aluminium hydroxide powder and high-purity hydrochloric acid. Its solid is white powder, and its 10% aqueous solution is a colourless transparent liquid. It is easily soluble in water, and during the hydrolysis process, it is accompanied by electrochemical, condensation, adsorption and other processes, and has a strong bridging adsorption effect. It is widely used in papermaking, medicine, daily chemicals, cosmetic additives and drinking water purification.
Polyferric Sulfate(PFS), also known as Polymeric Ferric Sulfate and Polyferric Sulphate, is an iron-based inorganic polymer coagulant. The solid is light yellow powder and is easily soluble in water; the aqueous solution is a reddish brown transparent solution. It has the advantages of high hygroscopicity, extremely high flocculation ability, fast sedimentation rate and wide application range. Poly ferric sulfate has stable performance, excellent water purification effect and does not contain heavy metal ions and other harmful substances. It has the functions of decolourisation, deodorisation, deodorisation, odour removal, removal of heavy metal ions, radioactive substances and carcinogenic substances in water. The removal rate of COD, BOD and chromaticity is above 90%. It has good purification effect on low temperature, low turbidity and high turbidity raw water. Poly ferric sulphate can also be used as phosphorus remover. Compared with other inorganic flocculants, the treatment cost can be reduced by 20% - 50%. Widely used in thermal power plants, coking plants, paper mills, printing and dyeing plants, electroplating plants, chemical plants and other heavily polluted wastewater treatment (because of its pH range is wider than that of polymeric aluminium chloride, suitable for pH value fluctuation of water quality).
Drinking water grade polymeric aluminium chloride produced by Xinhuan Water Treatment is produced by spray drying process (powder) and roller drying type (granule). It is produced with high quality raw materials such as aluminium hydroxide, hydrochloric acid and calcium aluminate powder. The technical standard is in line with the national GB15892-2020 standard, and the appearance of the product is yellow powder or granule. The product can remove bacteria, deodorant, fluorine, aluminium, chromium, oil, turbidity, heavy metal salts, in addition to radioactive pollutants, in the process of purifying a variety of water sources have a wide range of uses. It is suitable for drinking water, city water supply and drainage, circulating cooling water and paper making sizing precipitant, sugar decolouring and clarifying agent.
Polyaluminium chloride(PAC), as a polymer water purification material, is an inorganic polymer coagulant, referred to as PAC, polyaluminium, polyaluminum chloride, aluminum polychloride, Polymeric aluminum chloride.  Industrial-grade PAC adopts the most advanced spray drying production process and is made by polymerization of high-quality raw materials. The product has the advantages of flocculation and fast precipitation: good stability, wide adaptability to water, fast hydrolysis, strong adsorption capacity, formation of alumina flowers, dense precipitation, low effluent turbidity, good dehydration performance, etc. As the most effective water treatment chemicals, widely used in water treatment and drinking water, industrial water and sewage, wastewater treatment and other fields.
Polyacrylamide (PAM) produced by Xinhuan is a water-soluble polymer, insoluble in most organic solvents, with good flocculation effect. According to the different ionic properties, it can be divided into three major types: anionic, cationic and nonionic. In neutral alkaline media, it is characterised by polymer electrolytes, sensitive to salt electrolytes, and crosslinked with high-valent metal ions to form insoluble gels. Product Features 1. Flocculation: PAM can make suspended matter flocculate through electrical neutralization, bridging adsorption. 2. Adhesion: It can act as an adhesive through mechanical, physical and chemical effects. 3. Resistance reduction: PAM can effectively reduce the friction resistance of the fluid. Adding a trace of PAM to water can reduce resistance by 50-80%. 4. Thickening: PAM has a thickening effect under neutral and acidic conditions. When the pH value is above 10, PAM is easily hydrolyzed. When it is a semi-net structure, the thickening will be more obvious.
Ester alcohol C-12 is premier coalescent for latex paints,especially performs well in all kinds of acrylic acid ester,styrene,vinylacetate as raw materials and synthesis of various latex agent and other water-based paint system.
HONGYE HOLDING GROUP CORPORATION LIMITED can produce 20000MT Furfural per year. Furfural is used as a solvent in petrochemical refining to extract dienes (which are used to make synthetic rubber) from other hydrocarbons. Furfural, as well as its derivative furfuryl alcohol, can be used either by themselves or in together with phenol, acetone, or urea to make solid resins. Such resins are used in making fiberglass, some aircraft components, and automotive brakes.
Hongye Chemical Co., Ltd is the leading professional manufacturer and supplier of Thiourea Dioxide and pulp bleaching agent FAS. We can produce 50000MT Thiourea Dioxide(Formamidine sulfinic acid) &pulp bleaching agent FAS. Pulp bleaching agent FAS is one kind excellent pulp and paper bleaching agent, it can be used in reduction bleaching,waster paper deink bleaching. It is very stable in air and can be used under the normal equipments. Because of high reducibility and good stability, it is very suitable for high temperature continual bleaching, and there is good for environment, does not increase the waste water pollution load, conforms to the environmental protection requirements.
