Rail Carrying Roller Roller manufactured in special steel and used for moving long-welded rails. The supporting structure is composed of a roller that runs on two bearings and it is able to support the weight of the rail.
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long.
rail cow bar for track work It is for situations such as these that the jim-crow comes into its own. The jim crow was slotted over the rail about four or five sleepers away from the offending joint.and the screw tightened until it engaged with the edge of the rail. Then tightened the screw a further half-turn - thus bending the rail slightly.This process was repeated, moving the jim crow one sleeper nearer the joint each time and each time adding one more half-turn. This introduces a gradually increasing curve to the rail as it nears the joint.If you compare these two pictures with those showing the kinks above, you can see the difference.
Tamping rammer rammer compactor tamping hammer Applicable Industries:Building Material Shops, Machinery Repair Shops, Manufacturing Plant, Farms, Home Use, Retail, Construction works , Other
Lithium battery Rail impact wrench machine Double lithium traveling cantilever power wrench (model: LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations
Rangefinder, telescope, night vision instrument, thermal imaging, monitoring cameras, velocimeter.
NZG-31 Rail Drilling Machine NZG-31 rail drilling machine is compact in structure, and it is the lightest drilling machine in China at present. The rail clamping device has self-locking function, accurate positioning and high drilling accuracy. The n-tailed hollow drill bit can be used to clamp the special twist drill with n-tailed shank under 13.5 according to the needs. It has the function of automatic water supply when drilling. It is a necessary tool for maintenance, rush repair and overhaul operation of Public Works Department. Advantage 1. The water supply at the back of the main shaft is adopted to prevent the cooling water from entering the bearing and reducer, so as to improve the service life of the equipment. 2. When drilling, the rotary resistance is reduced and the drilling torque is increased. 3. The drilling time is shortened and the production efficiency is improved.
concrete sleeper bolt drilling machine The NLQ-45 concrete sleeper bolt drilling machine is suitable for drilling various types of concrete sleeper bolts under the condition of blocking the line. The principle of the nesting knife can be used to drill any position on the concrete sleeper. At the same time, the bolts can be Re-anchor the sleeper bolts in the drilled holes.
NZG-31 Rail Drilling Machine NZG-31 rail drilling machine is compact in structure, and it is the lightest drilling machine in China at present. The rail clamping device has self-locking function, accurate positioning and high drilling accuracy. The n-tailed hollow drill bit can be used to clamp the special twist drill with n-tailed shank under 13.5 according to the needs. It has the function of automatic water supply when drilling. It is a necessary tool for maintenance, rush repair and overhaul operation of Public Works Department. Advantage 1. The water supply at the back of the main shaft is adopted to prevent the cooling water from entering the bearing and reducer, so as to improve the service life of the equipment. 2. When drilling, the rotary resistance is reduced and the drilling torque is increased. 3. The drilling time is shortened and the production efficiency is improved.
NZMZ-20 Portable Sleeper Drilling Machine This machine is light-weight and easy to use and has the purpose of quickly drilling wooden sleepers ensuring precision andmaximum safety for the operator. It is composed of: * 4-stroke petrol engine with valves at the top and special lubrication to work on 360; * High-strength speed reducer gears lubricated by special TK3 grease that guarantees excellent lubrication and long life; * Ergonomic handle with throttle lever and engine safety lock; * Safety system with centrifugal clutch; * Possibility of inserting a lever able to rotate the drill bit in case of blockage; * Quick coupling / uncoupling spindle of the drill bit. Optionally we can supply: * Drill bit protection and drilling depth regulator ; * Trolley with 3 wheels for different types of track gauge; * SleeperDrill Bits.
gasoline steel rail drilling machine This machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, a screw nut clamping mechanism with quick opening function, fast clamping, accurate positioning, fast drilling, simple operation and safety use.
Rail Clamp The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair.
rail shoe buffer Friction buffer stops for mainline person and goods traffic railways are especially designed to withstand an impact with large masses with max. speeds of 25 km/h. The track systems and the used locomotives or cars in addition to their buffer geometry determine the type and design of the corresponding solution. Friction buffer stops that are also able to withstand the permanent stress in shunting operations are what characterise. A buffer stop or bumper is a device to prevent railway vehicles from going past the end of a physical section of track. The design of the buffer stop is dependent in part upon the kind of couplings that the railway uses, since the coupling gear is the first part of the vehicle that the buffer stop touches. The purpose of a friction buffer block is to secure the track end and its direct surroundings as well as the rail vehicles themselves. If the brakes fail, the buffer stop should be designed to decelerate the vehicle safely and in controlled manner until it stops.
Product description Onick NVG-S is portable and multifunctional night vision monocular with high resolution,small in size,light in weight .Magnification can be changed by replacing different objective lens, 1x and 3x are available.It can be equipped with digital camera, video recorder,CCD video camera and use super Gen 2+ and 3 Russian sophisticated Image Intensifier Tube with Anti-glare,function and built-in IR Illuminator,It can be widely used for military observation,sea defence,frontier reconnaissance,surveillance, suppress smuggling,drugs and traffickers seizure,security check ect,and also can be used in other low light condition. KEY FEATURES 1.High magnification 2.Long range viewing 3.Fully multi-coated optics 4.Superior resolution 5.Durable rubber armor 6.Built-in infrared illuminator 7.Reliable and easy to use Product information IIT 2+ Observation distance, m 175~200 Magnification 1 Angular field of view, degree ±2 Diopter Adjustment 5 Resolution, lp/mm min- max 57-72 Supply voltage, V (2 universal batteries) 3 Active performance period without IR illumination, min, hours 80 Active performance period with IR illumination, min, hours 40 Output pupil diameter, mmï¼?20 Output pupil relief, mmï¼?25 Monocular weight (with 1 battery), no more, gï¼?320 Mask weight, no more, gï¼?180 Bag weight, g 250 Ambient conditions Operating Temperature Range, ±40 Relative Humidity at 98% Shock resistance 5g Water resistance 2.0 �¼ (2 hours) Dimensions: 118x48x69 mm Operating mode switch and batteries compartment cover are easy to use even when operating in gloves. Monoculars are performed as corrosion-proof. Low battery indicator. R-on indicator. Possible mounting on a right/left side.
1. Product features: High-precision remote measurement: 15000 meters, accuracy of 2 meters; With strobe function, the smallest range channel can be set; Average ranging function (AGV); With standard RS232 serial port, it can also be equipped with Bluetooth and PDA, computer connection and data transmission; Can store and view measurement data, with data transmission, data retrieval, data deletion and lighting functions; In the normal ranging state, the horizontal and vertical distances of the target "HXXXX.X m VXXX.X m" are displayed. With azimuth angle, azimuth angle, elevation angle, azimuth angle is displayed as 360, true north displays N000.0, and the eastward gradually increases, the maximum is N359.9; the elevation angle display range is ±45, and the display is "
New upgrade CI series binocular long-distance laser rangefinder Onick CI series binocular laser rangefinder is newly upgraded, patent application number 202030826525.7. The CI series binocular and binocular longdistance laser rangefinder can quickly measure, automatically focus, can measure distance, can accurately calculate the average value, and has a powerful data storage function. Optional azimuth angle, pitch angle function, wide range of functions, small size, easy to carry, and easy to operate. It is widely used in rivers, waterways, benchmarks, telecommunications, cables, geological surveys, meteorology, airports, forests and other industries. 1. Product features: High-precision remote measurement of up to 10,000 meters without a reflector, with an accuracy of up to 0.5 meters; With strobe function, the smallest range channel can be set; with average ranging function (AGV); With standard RS232 serial port, it can also be equipped with Bluetooth and PDA, computer connection and data transmission; Can store and view measurement data, with data transmission, data retrieval, data deletion and lighting functions; Optional with azimuth angle, pitch angle function, display the horizontal distance, vertical distance, and pitch angle of the target, the pitch angle display range is ±45; the azimuth angle, the azimuth angle is displayed at 360, and the true north display is N000.0 , Gradually increase to the east, the maximum is N359.9; Application fields: electric power, industry, forestry, security, geological prospecting, construction, field hunting, camping and mountaineering, etc. 2. Technical parameters: Model: 10000CI Place of Origin: Made in China Listing Date: September 2019 Patent application number: 202030826525.7 English Brand: Onick 1. Ranging parameters Ranging range: 30~10000m Ranging error: 0.5m Distance strobe: 20 ~ 5100 m (step length is 10m) Accurate test rate: 98% Repetition frequency: 1/6 ~ 1/3 Hz (10 ~ 20 times/min) Compass accuracy: ±1 degree (optional) Inclination accuracy: ±0.1 degrees (within ±25 degrees) (optional) Ranging function Calculate the average of the measured data Measurement data storage (1000 data) Measurement data transmission (output interface: RS232, 9600, 8, N, 1) The brightness of the display and the illumination of the reticle are adjusted. Instrument working life statistics The last ten times of ranging value query Serial number query Storage area data query Optical parameters Receiving aperture: 0mm Scope field of view: 6.5 Scope magnification: 7X Laser parameters Wave length: 1.064m Light source: Nd:YAG Output energy: 5 mj Working life: 0000 times Working temperature: -20~+50 Environmental adaptation: dustproof, waterproof, shockproof Mechanical parameters: Dimensions: 151mm*154mm*74mm Weight: 1 Kg
Ultra long distance 20000CI binocular laser rangefinder Onick CI series binocular laser rangefinder is newly upgraded, patent application number 202030826525.7. CI series ultra-long-distance binocular binocular long-distance laser rangefinder can quickly measure, automatically focus, can measure distance, height, angle, with azimuth angle (electronic compass), can accurately calculate the average value, and Powerful data storage function. Wide range of functions, small size, easy to carry, and easy to operate. It is widely used in rivers, waterways, benchmarks, telecommunications, cables, geological surveys, meteorology, airports, forests and other industries. 1. Product features: High-precision remote measurement: 20000 meters, accuracy 2 meters; With strobe function, the smallest range channel can be set; Average ranging function (AGV); With standard RS232 serial port, it can also be equipped with Bluetooth and PDA, computer connection and data transmission; Can store and view measurement data, with data transmission, data retrieval, data deletion and lighting functions; In the normal ranging state, the horizontal and vertical distances of the target "HXXXX.X m VXXX.X m" are displayed. With azimuth angle, azimuth angle, elevation angle, azimuth angle is displayed as 360, true north displays N000.0, and the eastward gradually increases, the maximum is ; the elevation angle display range is ±45, and the display is "
I. Product features: Major focus handwheel design, plug and pull type objective lens dust cover; Using ergonomic design, the design is compact and fashionable, portable and lightweight You can watch it alone, or take photos and videos by connecting your mobile phone with a connecting ring. Full multi-layer coating BAK-4 roof prism, stable imaging, clear color; IPX6 nitrogen-filled waterproof, durable; Application fields: outdoor tourism, field exploration, sports events, concert, electric power safety inspection, forestry investigation, security and police, military patrol, industrial inspection, navigation observation, archaeological research, railway selection, land and resources investigation, etc. II. Product parameters: Multiple: 10 x Objective lens diameter: 42mm Prism type: BAK4 Number of lens sets: 8 pieces and 6 sets Lens coating: FMC Focus system: medium Exit pupil diameter: 4mm Exit pupil distance: 15.2mm View: 5.8 Field of view in km: 102m Latest focal length: 2m Relative brightness: 18.23 Evening Index: 20.4 Diopter: �±5 Eyepiece distance: 56-74mm Nitrogen - filled waterproof: IPX6 nitrogen - filled waterproof Mesh structure: knob Size: 127 x53x150mm Weight: 580.7 g Tripod: Supported (optional, universal camera tripod interface) Accessories: telescope, eyepiece cover, objective cover, portable soft bag, bracelet, mirror cloth, manual, warranty card, color box
Single-side rail chamfering device Single-side rail chamfering device is a special tool for eliminating the stress concentration at the sharp corner after rail drilling operation. It has the advantages of compact structure, simple operation, small size, light weight and convenient carrying etc. It is an indispensable tool in rail drilling works.
Petrol Engine Rail Drilling Machine This machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, a screw nut clamping mechanism with quick opening function, fast clamping, accurate positioning, fast drilling, simple operation and safety use.
