Conductor: Plain annealed Fire barrier: Mica Tape Insulation: XLPE Filler: Polypropylene yarn Binder Tape: Polypropylene Sheath : LSOH compound.
Handy Extension Wire for different kind of plugs. 2 meter wire. Size :39x45x49 Volume :0.09 Cubic Metres Weight :35. Quantity Per Carton :200.
Applications: Long distance telephone, catv, data communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct Burial (with armouring). Construction: The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500n (short term installation); 900n (long term installation) Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter) Twist (torsion length): 125 x overall diameter Working temperature: -20íµ ~ +70íµ (pe sheath) Storage temperature: -40íµ ~ +70íµ (pe sheath) Product highlights: Small diameter and light weight. Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber Cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress And achieve better flexibility. íewide operating temperature range. Roll, box, drum
í= Applications: Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable, it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between floors. í= Installations: Installed along the wall, the roof, interlayer, canal and indoor. í= Construction: The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central element made of 3 sub-units. í=Technical Parameters: íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode) íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation) íe Minimum Bending Radius: Short Term Installation: 20 x Overall Diameter Long Term Installation: 10 x Overall Diameter (Non-Armoured); 20 x Overall Diameter (Armoured) íe Twist (Torsion Length): 125 x Overall Diameter. íe Working Temperature: -10íµ ~ +70íµ (PE sheath) íe Storage Temperature: -20íµ ~ +70íµ (PE sheath) í= Product Highlights: íe Small diameter and light weight. íe The high tension characteristics of the aramid yarn serving as strength member can offer good stability in the transmission performance. íe Compact and flexible construction are especially suitable for indoor installations. íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved with excellent strip ability. íe LSZH jackets can be offered for indoor application for which flame retardancy is required. íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation within the operating temperature range. íe Fiber geometry are strictly monitored to ensure superior transmission performance. roll,box,drum
Applications: 10base-t, 100base-t4, 100base-tx, 100base-vg-anylan, 155mbps atm, 622mbps atm Working frequency: 1-100mhz Technical parameters: Characteristic impedance: 100ía15ª+ Nominal velocity of propagation(nvp): 69% Maximum dc resistance: 9.38ª+/100m Maximum mutual capacitance: 5.6 nf/100m Maximum capacitance unbalance: 330 pf/100m Maximum resistance unbalance: 5% Maximum propagation delay skew: 30 ns/100m Maximum propagation delay: 536 ns/100m 100 mhz Minimum bending radius: 10 x overall diameter Voltage rating: 60v rms Maximum pulling load: 80n Working temperature: -20 íµ ~ +60íµ Storage temperature: -5íµ ~ + 50íµ Flame retardancy: ul 1581 (cm jacket); ul 1666 (cmr jacket); ul 910 (cmp jacket); iec 60332-1 (frpvc & lszh jacket); iec 60332-1 & iec 60332-3c (lsfroh jacket) Product highlights: Provide excellent bandwidth beyond 100 mhz. Designed for use in data and voice backbone application. Meet the strict flame retardancy and environmental requirements in europe and us. Easily identifiable color code for ease of installation. Transmission properties: Freq: 100 (mhz) Roll, box, drum
Fiber Optic Patch Panel is a box for protecting the optical cable and pigtail splice in the cable laying. It is mainly used for the straight-through connection and branch connection of the indoor optical cable and the fixing of the cable terminal, and functions as a pigtail storage and protection joint.
Our dome fiber optic splice closure is made of PP/ABS alloy material it's strong and light, it can efficaciously prevent the lighting strike and erosion and aging and fire resist. The tray is pulled down, so it's easy installation, don't need to dismantle other trays, the material of the sealing is silica gel, it can repeatable operation.
1. Descriptions Mechanical Splice, namely Quick Splice, is a fast connection method of Optical Fiber, very easily installable and re-usable, no need splicing machine or adhesive, mainly used for drop cable quick repair 2. Features Proven mechanical splice technology, accurate Optical Fiber alignment A-level Zirconia ceramic V-groove design, high Optical Fiber docking accuracy, low Insertion Loss of 0.15 dB Precise metal alloy components coaxial autocollimator on the core, durable connection Low thermal expansion/contraction coefficient core material , strong environmental adaptability High tensile strength 50N Simple operation - without fusion splicing, fast installation - 10s splicing, high success rate - 99% Applicable Optical Fiber Cable 2.0mm, 3.0mm, 2.0*3.0mm Suitable Optical Fiber 250/900um SM/MM Different models for different scenarios, Black or White color usually Long service life 10 years, simple and convenient later maintenance Product warranty 12 month, no quality worry 3. Applications FTTX deployment Optical Fiber Cable repair Data communication 4. Specifications Insertion loss: average: 0.15dB, max. 0.20dB Return loss: 50dB Tensile strength: 50N Working temperature: -40C - +85C Repeated assembly times: 10 Splice size: 38*6.4*3.9 mm Protector size: 90*8.6*7.4 mm Package: 50 pcs/box 5. Advantages & disadvantages Advantages: price just 30% - 40% of top quality Optical Fiber Mechanical Splice like 3M, Fujikura, Corning, etc. Disadvantages: insertion loss (IL) 0.15dB, a little higher than top quality, whose insertion loss (IL) 0.10dB, but still lower than 0.20dB ~ 0.30dB of many other suppliers Conclusion: economic product
One-Stop Fiber Cabling Service Provider At Wirenet , we are proud to be your one-stop fiber cabling service provider, offering end-to-end solutions that simplify the complexities of fiber optic network design, installation, and integration. With over 14 years of experience in the fiber optic industry, we are committed to delivering high-quality, cost-effective, and future-ready solutions tailored to your specific needs. Comprehensive Fiber Cabling Solutions Our expertise spans the entire fiber cabling ecosystem, from design and build to network integration. We provide: Indoor and Outdoor Fiber Optic Cables: High-performance solutions for versatile applications. Fiber Optic Patch Cords: Customizable lengths and connectors for seamless connections. Fiber Termination Services: Ensuring clean and efficient signal transmission. Fiber Distribution Units (FDUs): Simplifying management of fiber optic networks. Fiber Splicing (Fusion and Mechanical): Precise and durable connections for uninterrupted data flow. Testing and Certification: Comprehensive quality assurance to meet industry standards.
Reliable Fiber Optic Solutions Provider At Wirenet , we pride ourselves on being a trusted partner for businesses worldwide seeking reliable fiber optic solutions. With over 14 years of expertise and advanced manufacturing facilities, we deliver high-quality fiber optic products designed to meet the evolving demands of telecommunications, data centers, and industrial networks. What Sets Us Apart as a Reliable Fiber Optic Solutions Provider? Comprehensive Manufacturing Expertise 7,000m² workshop for fiber optic cables and patch cords 2,000m² connector and adapter workshop 1,000m² PLC splitter production area Fully equipped testing lab with advanced equipment to meet IEC international standards Extensive Product Range We offer a wide variety of fiber optic products, including: Indoor and outdoor fiber optic cables Fiber optic patch cords Fiber optic connectors and adapters PLC splitters Fiber distribution systems Commitment to Quality and Performance Our products undergo rigorous testing to ensure reliability, durability, and compliance with international standards. From tensile strength testing to temperature resistance checks, every product is built to perform in the most demanding conditions. Customer-Focused Solutions Understanding that every network is unique, we provide customized fiber optic solutions tailored to your specific needs. Whether itâ??s a small-scale project or a large infrastructure deployment, we deliver solutions that work for you. Global Reach and Local Expertise With a strong presence in North and South America, South Africa, the Middle East, and Southeast Asia, we understand the specific challenges of different markets and offer solutions designed to excel in diverse environments.
Fiber Optic Infrastructure Solution At Wirenet , we specialize in providing comprehensive Fiber Optic Infrastructure Solutions tailored to meet the evolving needs of global telecommunications and networking industries. With 14 years of experience and state-of-the-art manufacturing facilities, we are your trusted partner for reliable, high-performance fiber optic products. Why Choose Wirenet for Fiber Optic Infrastructure Solutions? Extensive Manufacturing Capabilities 7,000m² fiber optic cable and patch cord workshop 2,000m² fiber optic connector and adapter workshop 1,000m² PLC splitter production area Fully equipped fiber optic testing lab with IEC-compliant testing equipment, including high and low-temperature test chambers and tensile test machines. Comprehensive Product Range Indoor & Outdoor Fiber Optic Cables: Designed for durability and high performance across various environments. Patch Cords: Customizable to suit any network infrastructure. Fiber Optic Connectors & Adapters: Precision-engineered for seamless connectivity. PLC Splitters: Reliable solutions for signal distribution in FTTH networks. Fiber Distribution Systems: Scalable solutions to support your growing network. Global Reach, Local Expertise With a strong presence in North & South America, South Africa, the Middle East, and Southeast Asia, our solutions are trusted by customers worldwide. We understand the unique challenges in each market and provide customized solutions to address specific pain points.
MPO Fiber Optic Cable MTP MPO fiber optic cable provide the higher bandwidth needed for HD conferencing and HDTV configurations. We offer MTP fiber optic cable in a variety of types and lengths; MPO stands for "Multi-Push-On-Over-Optical"; MPO fiber optic cable have a higher port density, and are available in a wide range of sizes. MTP multi-fiber cabling system is ideally suited for a high density environment that demands space saving and innovative cable management solutions; MTP supports various connections from multi-fiber to single fiber out. MTP (male or female) - MTP (male or female) OM4 12 strands Multimode ,LSZH jacket,Polarity B
Wireless Analog Sensor System With G7 wireless analog sensor and Base Station, you can start monitoring sensor measurement online remotely. Wireless sensor G7 transmits measurement of any industrial analog sensor with 4-20mA/0-5VDC signal to Base Station via wireless signal. Base Station collects all the wireless sensors readings and uploads to central server in interval via Modbus protocol. [In the Package] 1 x Base Station & RF Antenna 1 x AC/DC Adaptor 1 x Ethernet Cable Up to 64 x Wireless Sensors in one single system G7-AD Wireless Analog Sensor Analog Sensor 4 -20mA signal input 0 - 5VDC signal input Transmission Interval: User Programmable 5s - 4 hours Sensor ID: Unique 8 digits RF Wireless: 433MHz, 4.8Kbit/s RF Power: 10dBm Wireless Distance: 1200 meter (unblock) Operation Rating: 80mA (data transmission) Standby Rating: 3.0uA (sleep mode) Operating Voltage: 7- 10V DC Battery Life: Average 1- 2 year Dimension: 115 x 90 x 55 mm Base Station Protocol: Active Modbus Network Port: 10/100M Ethernet Data Packet: Instant on incoming data of connected sensors RF Wireless: 433MHz, 4.8Kbit/s RF Address/Band: 255/15 Operating Voltage: 5 - 20V DC Rating: 130mA Operating Temperature: -35 - 75 C Dimension: 70 x 65 x 35 mm water pipes network real time monitoring flow rate or pressure sensor oil/gas pipes network, pump stations flow rate or level sensor underground water level real time monitoring environmental monitoring system - wind/CO2/pressure/light sensors remote Industrial equipment monitoring wide area equipment monitoring e.g. power plant, antenna tower measuring equipment data capture and report via Wi-Fi food chain, storage, transport industry, building management agricultural, farming, laboratory, medical industry load cell, CO2, light sensors
