Non-Sterile Medical Examination Nitrile Gloves Powder free & Latex free
100% Virgin raw materials with FDA certificate & as per ASTM D6319/ CE EN 455
Quality standard: ASTM D6319, with 510K and FDA, CE/EN455,
Color: Blue, white
Finger Tips: textured
Cuff: Beaded
Pcs per Box for S/M/L/XL : 100pcs/box
Origin: China, Vietnam, Thailand, Malaysia
Benefits
Protection from unwanted and harmful substances
Beaded Cuff ensures easy donning and prevent roll down
Superior Strength with better Puncture resistance
Finger Tip Textured enhances wet and dry grip
Thinner Guage improves tactile senstivity
Custom Design enhances comfort and fit
Provide an Alternate Solution for individual who are allergic to natural rubber latex
Material : Synthetic Nitrile
Type : Non-Sterile Powder Free, Amibidextrous, Finger Tip Textured, beaded cuff.
Storage: Store in a dry and cool place, the temperature not higher than 38�° C
Shelf life: 2 years
Physical Properties
Tensile Strength: Before Aging 14Mpa min
Tensile Strength: After Aging 14Mpa min
Elongation at Break (%): Before aging 500% min
Elongation at Break (%): After aging 400% min
Length: 230 mm in XS, S, M, L, XL
Width: 70+/- 10 (XS)
Width: 80+/- 10 (S)
Width: 95+/- 10 (M)
Width: 110+/- 10 (L)
Width: 120+/- 10 (XL)
Thickness Single wall ( mm): Fingers 0.050mm min
Thickness Single wall ( mm): Palm 0.050mm min
1. Current overload or line surge shutdown
2. High temperature compressor shutdown.
3. High pressure alarm shutdown.
4. Low pressure alarm shutdown.
5. Low oxygen cocentrator alarm.
Oxygen concentrator: 0.5-5L/min
Purity: 95%+_3%
Working system Continuous
Power Supply AC230V.50Hz/AC220V.60HZ
AC120V.60Hz Power: 390VA
Net Weight: 16kg( Gross weight: 18.5kgs)
Warranty: Long-life compressor designed for 1000 hours of maintenance-free use.
Size: 33*26*54cm
Ready stock of Edge 82-133 / 300 pcs per box
Origin : Malaysia
Moq 1,000,000 boxes, first trial order 100,000 boxes
20000 boxes per container
Fob : Manila
Highly Breathable
- brand-new Typecool+EX filtration technology with ultra-high breathability
- differential pressure of the material < 6mmH2O/cm
- Ultra-low Breathing Resistance < 3.9mmH2O
- the breathing resistance is less than half of that of traditional FFP3 unvalved respirators
Droplet & splash resistance
UltraSpunBond water resistant and repellent layer forms the first defense against the direct upcoming threats to effectively repel and deflect most external particles.
5 Layered FILTER
ESPP
The 5th inner layer is ESPP , a skin-friendly material. Its hydrophilic property is sets it apart from traditional respirators. It is the most skin-friendly for sensitive skin as it can maintain consistent humidity under the mask either in a wet or dehydrated condition.
Typecool+EX
The 3rd & 4th layer are Typecool+EX, is created with SAVEWO brand-new electrode and dual-tip melt-blown technology. The two ultrafine fibers of different diameters are bound to form an ultimate filtration layer, which can efficiently filter both salt and oil particles.
Flexinet
The 2nd layer is Flexinet, an indestructible supporting layer is introduced during the development of Extreme Pro. It can withstand abusive strong pulls while maintaining the structure, hold the respirator 3D shape in place, and effectively protect the filtration layer.
UltraSpunBond
The 1st outer Layer is UltraSpunBond, a durable material giving a superb water-repellent and water-resistant performance, making EX Pro an effective shield against water particles from penetrating under any condition.
Ergonomic V-Taper Design
With a patented V-taped design, EX PRO is tapered toward the bottom and the upper headband is longer than the lower neckband. It not only provides users with more comfort to wear but also features an ergonomic design that maintains steady airflow.
PrefectSeal
The newly developed PerfectSeal pads are tailor-made for our respirator. The pads are placed on both the top and bottom pieces. The upper pad is equipped with a memory strip that can be molded to fit the face shape perfectly, thus providing an airtight and comfortable experience.
Patented V-shaped design with 3D PrefectSeal foam and HBPro, EX PRO fit for >90% of adults faces shapes with an inward leakage of
-Made with a carbon fiber frame, the total weight of the wheelchair including the battery is only 19kg.Half the weight of a traditional electric wheel chair.
-Can be folded in 3 seconds with simple steps. Become into a very small size , after folding able to stand upright and be dragged.
-With the high-capacity battery, it can provide up to 30km on a single charge, more than enough for daily usage
-220W*2 power output, capable of achieving uphill power of more than 10 degrees.
-Innovative Silence EABS, not only providing a slope braking ability of up to 15 degrees, but avoiding the traditional electromagnetic braking system.
-A medical device approved by
- CE
- FDA 510K
- EN12184
- ISO7176-1, -2, -3, -4, -5, -6, -8, -10, -11, -13, -14, -16, -22, -25
- ISO10993-5, 10
- EMC ISO 7176-21
- IEC60601
CE Certified Oximeter with OLED display.
Offer SPO2 and BPM.
Power consumption less than 25m
Voltage DC 2.6V to 3.6 V
Power Supply - 1.5 V( AAA Size) Alkaline Batteries 2.
Safety Type - Interior Battery.
Weight 65 Grams.
Built upon a legacy of reliable, field-proven concentrator models, the DeVilbiss 5 Liter Oxygen Concentrator was designed
with enhanced quality, durability and simplicity in mind
Patented DeVilbiss Turn-Down Technology minimizes wear on internal components, reduces power consumption by 15% or more and extends the life of the concentrator
Exclusive DeVilbiss OSD (Oxygen Sensing Device), standard on every unit, ensures patient safety and reliability for longer
service intervals
Readily accessible patient controls, protected cannula fitting and recessed humidifier nook to prevent damage
Alarms Audible and visual high/low pressure, low flow, low oxygen, power fail, Oxygen Sensing Device
Sold separately, the Transfill Caddy is designed with a steel frame to simply connect the 18 x 14 inch shelf, designed to
support up to 40 lbs, to the DeVilbiss 5L Concentrator. Rear view (Figure A), Front View (Figure B)
HONGEN 5L/min Membrane Oxygen Generator
HONGEN 5L/min Membrane Oxygen Generator was a smaller capacity design of Oxygen Generator,despite the smaller capacity design it was built upon a legacy of reliable,field-proven concentrator models. HONGEN 5 Liter Oxygen Concentrator was updated with enhanced quality, durability, performance and simplicity in mind.This robust oxygen concentrator offers just the right balance of cool and quiet. The designed was specify on slim concept to reduce the space consumption of the user and bring convenience to household, clinic and hostipal usage.
Specification:
Technical parameters:
ambient humidity: 95% RH
ambient temperature:-30 ~+40
Technical parameters: operating voltage: AC220 + 20V/50Hz
rated power: 50 W
main engine weight: 3.1 kg
working noise: 42dB(A)
oxygen concentration: 90 3+ oxygen flow rate: ï½?5 (N)L/min
oxygen production principle:MAS membrane air separation
ALL TEST SARS-COV-2 Antigen Rapid Test (Nasal Swab) 1pc for Omicron & Delta
Certified - Zeppa Authorised Distributor For Listed Product
RECOGNISED BY THE HONG KONG DEPARTMENT OF HEALTH
100% AUTHENTIC GUARANTEE WITH CERT
USE: The COVID-19 Antigen Rapid Test (Nasal Swab) is a single-use test kit intended to detect the SARS-CoV-2 that causes COVID-19 with self-collected nasal swab specimen from symptomatic individuals who are suspected of being infected with COVID-19. This test is designed for home use with self-collected nasal swab samples in individuals who are suspected of COVID-19. The COVID-19 Antigen Rapid Test (Nasal Swab) obtain a preliminary results only, the final confirmation should be based on clinical diagnostic results.
Product
Self-testing format for high privacy
Fast results
Easy visually interpretation
Simple operation, no equipment required
High accuracy
Features
Kit Components
Test Cassette
Pre-installed Extraction Buffer
Package Installed Extraction Buffer
Package Insertz
Sterile Swab
Biosafety Bag
HONGEN 3L/min Membrane Protable Oxygen Generator
HONGEN 3L/min Membrane Protable Oxygen Generator was designed with a extra slim
concept with the reduction of weight to 1.3KG, which highly reduced the weight and space consumption of the user. HONGEN 3L/min Membrane Protable Oxygen Generator was also designed with LED Panel for easier control and display. Therefore, it was integrated with build-in battery which allow it to last up to 8 hours, to bring convenience for on the go usage. Nevertheless, it had been strictly manufactured based on a high quality foundation which makes them to maintain the enhanced quality, durability, performance and simplicity in mind comparing to the powerpluged Oxygen Generator. The design was specify on portable and durability best suitable for indoor and outdoor usage.
Specification:
Technical parameters:
ambient humidity: 95% RH
ambient temperature:-30 ~+40
Technical parameters: operating voltage: DC12
rated power: 15W
main engine weight: 1.3 kg
working noise: 42dB(A)
oxygen concentration: 90 +3 oxygen flow rate: 3(N)L/min
oxygen production principle:MAS membrane air separation
HONGEN 1L/min Membrane Protable Oxygen Generator
HONGEN 1L/min Membrane Protable Oxygen Generator was designed in the way of portability with the reduction of weight to 870g, which highly reduced the weight and space consumption of the user. HONGEN 1L/min Membrane Protable Oxygen Generator was integrated with build-in battery which allow it to last up to 4 hours. The unique and simple portable design allow easier usage and portability for the user, which are best suitable for outdoor usage and travellers.
Specification:
1L/min membrane oxygen generator
Technical parameters:
ambient humidity: 5% RH
ambient temperature: -30 ~+40
Technical parameters: operating voltage: DC12
rated power: 10W
main engine weight: 870g
working noise: 42dB(A)
oxygen concentration: 90 + 3oxygen flow rate: 1(N)L/min
oxygen production principle:MAS membrane air separation
2194 Miscellaneous Suppliers
Short on time? Let Miscellaneous sellers contact you.
