Features: - Reduces exposure to blood and body fluids - Minimized contamination from inhaled microorganisms Certifications: CE FDA Filtration Level: BFE > 95% PFE > 95% Adult Size: 17.5 x 9.5 cm Material Composition: Outer & Inner Layer: 100% Polypropylene Middle Layer: 100% Meltbrown
Surgical face mask ( Non-sterile ) TYPE II
3 Layer Non-woven Face Mask ( Non-sterile ) TYPE IIR
Non-woven Face Mask (Sterile ) TYPE I
Medical gloves like vinyl, nitrile and latex gloves.
Extreme Filtration - Sodium Chloride Filtration Test 99% - Paraffin Oil Filtration Test 99% - Bacteria Filtration Efficiency BFE 99.9% - Particle Filtration Efficiency PFE 99.9% - Virus Filtration Efficiency VFE 99% - 160mmHg fluid resistance - Filtration is effective for 24 hours+ - Filtration efficiency maintained 99.9%after soaking in 100% relative humidity environment Highly Breathable - brand-new Typecool+EX filtration technology with ultra-high breathability - differential pressure of the material < 6mmH2O/cm - Ultra-low Breathing Resistance < 3.9mmH2O - the breathing resistance is less than half of that of traditional FFP3 unvalved respirators Droplet & splash resistance UltraSpunBond water resistant and repellent layer forms the first defense against the direct upcoming threats to effectively repel and deflect most external particles. 5 Layered FILTER ESPP The 5th inner layer is ESPP , a skin-friendly material. Its hydrophilic property is sets it apart from traditional respirators. It is the most skin-friendly for sensitive skin as it can maintain consistent humidity under the mask either in a wet or dehydrated condition. Typecool+EX The 3rd & 4th layer are Typecool+EX, is created with SAVEWO brand-new electrode and dual-tip melt-blown technology. The two ultrafine fibers of different diameters are bound to form an ultimate filtration layer, which can efficiently filter both salt and oil particles. Flexinet The 2nd layer is Flexinet, an indestructible supporting layer is introduced during the development of Extreme Pro. It can withstand abusive strong pulls while maintaining the structure, hold the respirator 3D shape in place, and effectively protect the filtration layer. UltraSpunBond The 1st outer Layer is UltraSpunBond, a durable material giving a superb water-repellent and water-resistant performance, making EX Pro an effective shield against water particles from penetrating under any condition. Ergonomic V-Taper Design With a patented V-taped design, EX PRO is tapered toward the bottom and the upper headband is longer than the lower neckband. It not only provides users with more comfort to wear but also features an ergonomic design that maintains steady airflow. PrefectSeal The newly developed PerfectSeal pads are tailor-made for our respirator. The pads are placed on both the top and bottom pieces. The upper pad is equipped with a memory strip that can be molded to fit the face shape perfectly, thus providing an airtight and comfortable experience. Patented V-shaped design with 3D PrefectSeal foam and HBPro, EX PRO fit for >90% of adults faces shapes with an inward leakage of
-Made with a carbon fiber frame, the total weight of the wheelchair including the battery is only 19kg.Half the weight of a traditional electric wheel chair. -Can be folded in 3 seconds with simple steps. Become into a very small size , after folding able to stand upright and be dragged. -With the high-capacity battery, it can provide up to 30km on a single charge, more than enough for daily usage -220W*2 power output, capable of achieving uphill power of more than 10 degrees. -Innovative Silence EABS, not only providing a slope braking ability of up to 15 degrees, but avoiding the traditional electromagnetic braking system. -A medical device approved by - CE - FDA 510K - EN12184 - ISO7176-1, -2, -3, -4, -5, -6, -8, -10, -11, -13, -14, -16, -22, -25 - ISO10993-5, 10 - EMC ISO 7176-21 - IEC60601
Item: TPE Gloves Disposable Individual Packing: 100 Gloves in Dispenser Box Size of Individual Box 25.9 x 13.5 x 2.5 cm Sizes: Small, Medium, Large, X-Large Packing: 10 Dispenser Boxes in master carton Carton Dim: 27 x 14 x 27 cm Container Qty: 28000 Boxes in 20' container 56000 Boxes in 40' container 66500 Boxes in 40'HQ container Delivery: Within 15 days
1. Adult Medium / Large Concentration Oxygen Mask with 2.1m Oxygen Tube. 2. Pediatric Medium / Large Concentration Oxygen Mask with 2.1m Oxygen Tube. 3. Infant Medium Concentration Oxygen Mask with 2.1m Oxygen Tube. 4. Adult High Concentration Oxygen Mask with 2.1m Oxygen Tube. 5. Pediatric High Concentration Oxygen Mask with 2.1m Oxygen Tube.
CE Certified Oximeter with OLED display. Offer SPO2 and BPM. Power consumption less than 25m Voltage DC 2.6V to 3.6 V Power Supply - 1.5 V( AAA Size) Alkaline Batteries 2. Safety Type - Interior Battery. Weight 65 Grams. Priced at 9 USD CIF
Built upon a legacy of reliable, field-proven concentrator models, the DeVilbiss 5 Liter Oxygen Concentrator was designed with enhanced quality, durability and simplicity in mind Patented DeVilbiss Turn-Down Technology minimizes wear on internal components, reduces power consumption by 15% or more and extends the life of the concentrator Exclusive DeVilbiss OSD (Oxygen Sensing Device), standard on every unit, ensures patient safety and reliability for longer service intervals Readily accessible patient controls, protected cannula fitting and recessed humidifier nook to prevent damage Alarms Audible and visual high/low pressure, low flow, low oxygen, power fail, Oxygen Sensing Device Sold separately, the Transfill Caddy is designed with a steel frame to simply connect the 18 x 14 inch shelf, designed to support up to 40 lbs, to the DeVilbiss 5L Concentrator. Rear view (Figure A), Front View (Figure B) EXW Cost USD 810 Immediate delivery available from the USA
PURI NANO FILTER MASKNiosh N95 Rated. White Coloured. Ready for shipment from South Korea. Quantity Available is 7 Mil Units.
ICU Ventilator - Priced at USD 7600 Per Unit. Made in China Available Quantity - 200 Units
ICU Ventilator S1600 Made in China Available Quantity 200 units. Priced at USD 3600 per Unit EXW
NIOSH, FDA, CE, AZ/NZS, Japan approved. FFP2 NR, FFP3 NR Nelson's Lab test -BFE >99.9% -PFE >95% CoO: PRC Certificated protection level: EN149; EN14683; NIOSH-42CFR84 Lead time depend on order volume. Payment terms: Non-negotiable TT Price: US$3.8
ALL TEST SARS-COV-2 Antigen Rapid Test (Nasal Swab) 1pc for Omicron & Delta Certified - Zeppa Authorised Distributor For Listed Product RECOGNISED BY THE HONG KONG DEPARTMENT OF HEALTH 100% AUTHENTIC GUARANTEE WITH CERT USE: The COVID-19 Antigen Rapid Test (Nasal Swab) is a single-use test kit intended to detect the SARS-CoV-2 that causes COVID-19 with self-collected nasal swab specimen from symptomatic individuals who are suspected of being infected with COVID-19. This test is designed for home use with self-collected nasal swab samples in individuals who are suspected of COVID-19. The COVID-19 Antigen Rapid Test (Nasal Swab) obtain a preliminary results only, the final confirmation should be based on clinical diagnostic results. Product Self-testing format for high privacy Fast results Easy visually interpretation Simple operation, no equipment required High accuracy Features Kit Components Test Cassette Pre-installed Extraction Buffer Package Installed Extraction Buffer Package Insertz Sterile Swab Biosafety Bag
HONGEN 3L/min Membrane Protable Oxygen Generator HONGEN 3L/min Membrane Protable Oxygen Generator was designed with a extra slim concept with the reduction of weight to 1.3KG, which highly reduced the weight and space consumption of the user. HONGEN 3L/min Membrane Protable Oxygen Generator was also designed with LED Panel for easier control and display. Therefore, it was integrated with build-in battery which allow it to last up to 8 hours, to bring convenience for on the go usage. Nevertheless, it had been strictly manufactured based on a high quality foundation which makes them to maintain the enhanced quality, durability, performance and simplicity in mind comparing to the powerpluged Oxygen Generator. The design was specify on portable and durability best suitable for indoor and outdoor usage. Specification: Technical parameters: ambient humidity: 95% RH ambient temperature:-30 ~+40 Technical parameters: operating voltage: DC12 rated power: 15W main engine weight: 1.3 kg working noise: 42dB(A) oxygen concentration: 90 +3 oxygen flow rate: 3(N)L/min oxygen production principle:MAS membrane air separation
HONGEN 1L/min Membrane Protable Oxygen Generator HONGEN 1L/min Membrane Protable Oxygen Generator was designed in the way of portability with the reduction of weight to 870g, which highly reduced the weight and space consumption of the user. HONGEN 1L/min Membrane Protable Oxygen Generator was integrated with build-in battery which allow it to last up to 4 hours. The unique and simple portable design allow easier usage and portability for the user, which are best suitable for outdoor usage and travellers. Specification: 1L/min membrane oxygen generator Technical parameters: ambient humidity: 5% RH ambient temperature: -30 ~+40 Technical parameters: operating voltage: DC12 rated power: 10W main engine weight: 870g working noise: 42dB(A) oxygen concentration: 90 + 3oxygen flow rate: 1(N)L/min oxygen production principle:MAS membrane air separation
HONGEN 10L/min Membrane Oxygen Generator HONGEN 10L/min Membrane Oxygen Generator built upon a legacy of reliable,field-proven concentrator models. HONGEN 10 Liter Oxygen Concentrator was updated with enhanced quality, durability, performance and simplicity in mind.This robust oxygen concentrator offers just the right balance of cool and quiet. The designed was specify on slim concept to reduce the space consumption of the user and bring convenience to household, clinic and hostipal usage. Specification: Technical parameters: ambient humidity: 95% RH ambient temperature:-30 ~+40 Technical parameters operating voltage: AC220 + 20V/50Hz rated power: 50 W main engine weight: 3.6 kg working noise: 42dB(A) oxygen concentration: 90 + 3 oxygen flow rate: 10 (N)L/min oxygen production principle:MAS membrane air separation
Goldsite SARS-CoV-2 Antigen Kit (Colloidal Gold) Packing:1 test/box, 5 tests/box, 25 tests/box Use: For qualitative detection of SARS-CoV-2 nucleocapsid antigen to aid in the rapid diagnosis of SARS-CoV-2 infections Kit components: Test cartridge, Sterilized swab Extraction tube (prefilled with buffer), Instructions for Use Time to results: 12 mins Cert: CE 1434 Made in China
