Refined chemicals and non-ferrous metals, petrochemicals.
Plastic scraps.
Electric motor scrap transformer scrap ballast scrap compressor scrap meter scrap shredded motor scrap alucobond scrap electronic/telecom scrap cables scrap shredder residues automobile parts scrap / starter/alternator/ac compressor.
Product Property: Molecular formula: Zn Molecular Weight: 65.38 Physical Property: light grey metal fine powder. Density: 7.14g/cm3 Melting Point: 419.4¡ãC Boiling Point: 908% Chemical property: insoluble in water, soluble in acid and alkali, slowly soluble in acetic acid, ammonia water, it has strong reducing performance and give out hydrogen. Lumps when being wet, keeps stable in dry air and generates white basic carbonate covering in its surface in wet air. When combusting in the air, it can generate blue green flame and generate zinc oxide. High pure zinc act slowly with sulfuric acid and nitric acid, while act fast when it contains few of other metals such as steel, tin and lead.
Product characteristics: The highly active Zinc powder produced by our company has some characteristics of high contain of Zinc, low impurity elements, smooth surface, large surface area, small density of loose-powder, little oxide on surface, melting deformation and little grape shaped particles after sticking, average particle diameter is 0.1-4¦Ìm, total Zinc contain is more than 98.5%, metal Zinc contain is more than 96%.
Zinc ingot. Package: Bundled up with galvanized steel strips
1.Specialize for gift wrapping, flower & plant packaging, promotion, shopping etc. 2.High quality, competitive price, punctual lead time, good after sale service 3.Customized sizes, colors and designs can be available ven pp. Kinds of handles: orced bottom board closed. Attention:image is for illustrative purposes only. If colour is important and for further information, pls be free to contact us via email Paper carton with opp bag enclosed.
PVC,PET,ABS. Iam.Img classic card box of 100 copies (9.5*8*6.5).
PVC table cloth, yoga mat, place mats, lace table cloth, non-slip mats, floor mats.
Product warranty card, id card, health care card, key tage card, gift card, non-standard card, business card, membership card, vip card, discount card.
Non Stretchable, Non bendable, Rubber coat, for hand-hold talkie. Thanks&Best Regards, Frequency Range: 240-270MHz, 240-270MHz, 136-174MHz, 145/435MHz, 400-470MHz. Impedance: 50 VSWR: 1.5 Gain: 2.15dBi (240-270MHz,) 2.15/3dBi (145/435MHz) 3dBi (400-470MHz) Polarization: Vertical Radiation: Omni Maximum Power Input: 20 W Height: 405+3mm Termination: SMA-M/F/BNC Radom Material: TPEE/Cooper Color: Black/Yellow/White/Red/Green/Blue/Gold/Silver
Applications: Long distance outside telephone, catv, data, communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial (with armoring). Construction: The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation) Minimum bending radius: Short term installation: 20 x overall diameter Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored) Twist (torsion length): 125 x overall diameter Working temperature: -40íµ ~ +70íµ (pe sheath) Storage temperature: -50íµ ~ +70íµ (pe sheath) Product highlights: All the fiber containing tubes are placed in concentric layers around the central member; through the control of The twist length, the fiber cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene, Are placed at the centre of the cables. Roll, box, drum
í= Applications: Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable, it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between floors. í= Installations: Installed along the wall, the roof, interlayer, canal and indoor. í= Construction: The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central element made of 3 sub-units. í=Technical Parameters: íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode) íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation) íe Minimum Bending Radius: Short Term Installation: 20 x Overall Diameter Long Term Installation: 10 x Overall Diameter (Non-Armoured); 20 x Overall Diameter (Armoured) íe Twist (Torsion Length): 125 x Overall Diameter. íe Working Temperature: -10íµ ~ +70íµ (PE sheath) íe Storage Temperature: -20íµ ~ +70íµ (PE sheath) í= Product Highlights: íe Small diameter and light weight. íe The high tension characteristics of the aramid yarn serving as strength member can offer good stability in the transmission performance. íe Compact and flexible construction are especially suitable for indoor installations. íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved with excellent strip ability. íe LSZH jackets can be offered for indoor application for which flame retardancy is required. íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation within the operating temperature range. íe Fiber geometry are strictly monitored to ensure superior transmission performance. roll,box,drum
Commodity/Product: Electrolytic Copper Cathode Plates Fineness: 99.99% Cu; but not lower than 99.97% (inferior quality to be rejected) Quality: Non LME registered but in compliance with LME Grade A specifications Origin: Democratic Republic of Congo LME: London Metals Exchange (www.lme.com) Physical Dimensions Length 914 mm (LME standards) Width 914 mm (LME standards) Thickness 12 mm (LME standards) Net weight per sheet 125 Kg (Approx.) (+-2%) Net weight per pallet 2 Mtons (Approx.) (+-2%) Net weight per container 20 Mtons (Approx.) (+-2%) Gross weight per container 22,2 Mtons (Approx.) (+-2%) Packing palletized banded by aluminum bands Chemical Composition Elements Value Copper Cu 99.97% Min. Cobalt Co 0.2 ppm Max. Lead Pb 0.2 ppm Max. Iron Fe 2 ppm Max. Aluminum Al 0.5 ppm Max. Manganese Mn 0.1 ppm Max. Nickel Ni 0.2 ppm Max. Antimony Sb 0.1 ppm Max. Arsenic AS 0.1 ppm Max. Silica Si 0.3 ppm Max. Bismuth Bi 0.1 ppm Max. Teleurium Te 0.05 ppm Max. Silver Ag 10 ppm Max. Selenium Se 0.3 ppm Max. Sulphur S 4 ppm Max. Magnesium Mg 0.4 ppm Max. Argent Ag 10 ppm Max. Zinc Zn 0.4 ppm Max. Oxygen O2 0
non-inductive,plastic case sealed with epoxy resin provides interference suppression with,VDE,ENEC and UL approvals opertating temperature:-40c~+110c voltage rating:250/275/305/310VAC capacitance range:0.001~202uF capacitance tolerance:+/-10%
Non-inductive, dip coated, high moisture resistance. Good reputation in use with filtering, dc blocking coupling and general communication equipment. High reliable with its self-healing performance. Coated with epoxy resin for superior heat resistance. Operating temperature:-40c~+85c Rated voltage:100.250.400.630vdc Capacitance range:0.01~6.8uf Capacitance tolerance:+/-5%, +/-10%
Silicon Metal, Silicon Carbide..
Aluminum Alloy dragon cable.It is made of alloy shell,cooper core and dragon woven.It has charge 2 in 1,bold conductor,high strength wire rope,and durable non knot functions. Suitable for
Flat design,not easy to knot,internal use of high purity oxygen free copper wire, strong conductivity,nickel plate connector,resistance to plug and play,two port uniqne non slip setting,more fit finger,and easier to plug speed charging
Carbon Silicon Manganese .
