Application: Power limited circuit, remote control, signaling, security systems, communications, intercom/P.A. systems, sound/audio, and nurse call. Conductor Material: Bare copper wire strands Insulation Material: PE/PVC Laying-up: Units Drain Wire: Solid bare copper Shield: Overall Al/Polyester foil shield Nylon Rip Cord: 150D Sheath Material: PVC/LSF/PE Sheath Color: As your request Shape: Circular in cross-section Voltage Rating: 300/500 voltage Temperature Rating: 75íµ Fire Performance Flame Propagation Test to IEC 60332 Part 1 and Part 3 Determination of the amount Halogen Acid Gas to IEC 60754 Part 1 Smoke Density Test to IEC 61034 Oxygen Index Test to BS 2863 or ISO 4589-2 Temperature Index Test to BS 2782 or ISO 4589-3 Fire Resistant Test to IEC 60331-24.
Standards: Generally BS6500 VDE0250 Conductor: Class 5 annealed copper conductors to BS6360 / VDE0295 Insulation: PVC Bedding: PVC Braiding: Tinned Copper Wire Braid (TCWB) Sheath: PVC (Type TM2 to BS7655) Voltage Rating: 300/500V Temperature rating: Flexing -15ípC to +70ípC Static -35ípC to +70ípC
Commodity/Product: Electrolytic Copper Cathode Plates Fineness: 99.99% Cu; but not lower than 99.97% (inferior quality to be rejected) Quality: Non LME registered but in compliance with LME Grade A specifications Origin: Democratic Republic of Congo LME: London Metals Exchange (www.lme.com) Physical Dimensions Length 914 mm (LME standards) Width 914 mm (LME standards) Thickness 12 mm (LME standards) Net weight per sheet 125 Kg (Approx.) (+-2%) Net weight per pallet 2 Mtons (Approx.) (+-2%) Net weight per container 20 Mtons (Approx.) (+-2%) Gross weight per container 22,2 Mtons (Approx.) (+-2%) Packing palletized banded by aluminum bands Chemical Composition Elements Value Copper Cu 99.97% Min. Cobalt Co 0.2 ppm Max. Lead Pb 0.2 ppm Max. Iron Fe 2 ppm Max. Aluminum Al 0.5 ppm Max. Manganese Mn 0.1 ppm Max. Nickel Ni 0.2 ppm Max. Antimony Sb 0.1 ppm Max. Arsenic AS 0.1 ppm Max. Silica Si 0.3 ppm Max. Bismuth Bi 0.1 ppm Max. Teleurium Te 0.05 ppm Max. Silver Ag 10 ppm Max. Selenium Se 0.3 ppm Max. Sulphur S 4 ppm Max. Magnesium Mg 0.4 ppm Max. Argent Ag 10 ppm Max. Zinc Zn 0.4 ppm Max. Oxygen O2 0
Flat design,not easy to knot,internal use of high purity oxygen free copper wire, strong conductivity,nickel plate connector,resistance to plug and play,two port uniqne non slip setting,more fit finger,and easier to plug speed charging
Central loose tube cable contains one tube with 2 - 24 fibers, which is filled with water blocking gel. A water swelling tape is helically wrapped around the cable core. Either aramid yarn or fiber glass is wound around the tube to provide physical protection and tensile strength. The cable is jacketed with PE for water protection purpose. For direct burial, steel wire armour and corrugated steel tape armour are applied with an optional PE
Screen: (overall screen) (indiviudual screen + overall screen) (overall screen + steel wire armour) (individual screen+ overall screen+steel wire armour) Sheath version: pvc/lsf/lsoh
Conductor material: solid plain annealed copper referred to bs6360 Insulation material: cellular high density polyethylene Laying-up: pairs; units Wrapping: polyester tape Filler: petrolatum jelly filled Screen: aluminium foil with overlapping Bedding: polyethylene
Applications: Long distance outside telephone, catv, data, communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial (with armoring). Construction: The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation) Minimum bending radius: Short term installation: 20 x overall diameter Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored) Twist (torsion length): 125 x overall diameter Working temperature: -40íµ ~ +70íµ (pe sheath) Storage temperature: -50íµ ~ +70íµ (pe sheath) Product highlights: All the fiber containing tubes are placed in concentric layers around the central member; through the control of The twist length, the fiber cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene, Are placed at the centre of the cables. Roll, box, drum
we also dealing with pipe and fitting, cable wirless.
Aluminum Alloy dragon cable.It is made of alloy shell,cooper core and dragon woven.It has charge 2 in 1,bold conductor,high strength wire rope,and durable non knot functions. Suitable for
Copper cathodes.
Copper cathode.
Copper cathode.
Cables.
Cables.
Cables.
Steel shot, steel grit, steel cut wire shot.
Cables.
Cables, power calbes, control cables , tel cables, belden cables.