Applications:
Long distance telephone, catv, data communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct
Burial (with armouring).
Construction:
The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the
Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical
Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh
Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500n (short term installation); 900n (long term installation)
Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter)
Twist (torsion length): 125 x overall diameter
Working temperature: -20íµ ~ +70íµ (pe sheath)
Storage temperature: -40íµ ~ +70íµ (pe sheath)
Product highlights:
Small diameter and light weight.
Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber
Cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress
And achieve better flexibility.
íewide operating temperature range.
í= Applications:
Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable,
it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between
floors.
í= Installations:
Installed along the wall, the roof, interlayer, canal and indoor.
í= Construction:
The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The
cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In
the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are
stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped
into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a
PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central
element made of 3 sub-units.
í=Technical Parameters:
íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode)
íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation)
íe Minimum Bending Radius:
Short Term Installation: 20 x Overall Diameter
Long Term Installation: 10 x Overall Diameter (Non-Armoured);
20 x Overall Diameter (Armoured)
íe Twist (Torsion Length): 125 x Overall Diameter.
íe Working Temperature: -10íµ ~ +70íµ (PE sheath)
íe Storage Temperature: -20íµ ~ +70íµ (PE sheath)
í= Product Highlights:
íe Small diameter and light weight.
íe The high tension characteristics of the aramid yarn serving as strength member
can offer good stability in the transmission performance.
íe Compact and flexible construction are especially suitable for indoor installations.
íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of
the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved
with excellent strip ability.
íe LSZH jackets can be offered for indoor application for which flame retardancy is required.
íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation
within the operating temperature range.
íe Fiber geometry are strictly monitored to ensure superior transmission performance.
Applications:
Long distance outside telephone, catv, data, communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial
(with armoring).
Construction:
The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a
Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable
Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation)
Minimum bending radius:
Short term installation: 20 x overall diameter
Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored)
Twist (torsion length): 125 x overall diameter
Working temperature: -40íµ ~ +70íµ (pe sheath)
Storage temperature: -50íµ ~ +70íµ (pe sheath)
Product highlights:
All the fiber containing tubes are placed in concentric layers around the central member; through the control of
The twist length, the fiber cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene,
Are placed at the centre of the cables.
Applications:
10base-t, 100base-t4, 100base-tx, 100base-vg-anylan, 155mbps atm, 622mbps atm
Working frequency:
1-100mhz
Technical parameters:
Characteristic impedance: 100ía15ª+
Nominal velocity of propagation(nvp): 69%
Maximum dc resistance: 9.38ª+/100m
Maximum mutual capacitance: 5.6 nf/100m
Maximum capacitance unbalance: 330 pf/100m
Maximum resistance unbalance: 5%
Maximum propagation delay skew: 30 ns/100m
Maximum propagation delay: 536 ns/100m 100 mhz
Minimum bending radius: 10 x overall diameter
Voltage rating: 60v rms
Maximum pulling load: 80n
Working temperature: -20 íµ ~ +60íµ
Storage temperature: -5íµ ~ + 50íµ
Flame retardancy: ul 1581 (cm jacket); ul 1666 (cmr jacket); ul 910 (cmp jacket); iec 60332-1 (frpvc
& lszh jacket); iec 60332-1 & iec 60332-3c (lsfroh jacket)
Product highlights:
Provide excellent bandwidth beyond 100 mhz.
Designed for use in data and voice backbone application.
Meet the strict flame retardancy and environmental requirements in europe and us.
Easily identifiable color code for ease of installation.
Transmission properties:
Freq: 100
(mhz)
Mobile phones, TV cell phones, batteires chargers, fashion electronics, cutting-edge electronics, fashion stereo, digital frames, laptops computer accessories, SPO2 sensors, car dvd player,
Car accessories, moulds.
Solution for Automotive Wiring Harness
With years of experience in wire harness manufacturing, Kinkong Wire Harness can provide complete solutions for a wide range of different applications in the automotive industry. We produce wiring harness for engine, light & lamp, sensor, ignition coil, accelerator pedal, fuel injection, car radio, chassis, etc, but not limited to the above mentioned. Weâ??re looking forward to getting inquiry from you.Ã? Click hereÃ? to find out more.Ã?Â
Overview
Kinkong Wire Harness is a derivative brand of KINKONG, mainly focus on the custom wire harness assembly and over-molding service for after-market and tuning-market in the vehicle industry, including cars, motorcycles, racing cars, agricultural machinery, mining machine, ATV, superbikes, scooters, e-bikes, sea-doo, Can-Am...
We began from very small pigtail harnesses and have grown to be a very specialized and quality-ensured wiring manufacture for more intricate wiring harnesses, from auto lamp harness, engine harness, to chassis harness, and all the customized harness if needed.
Our mission is to provide our customers with super qualified products & services with a low total cost of ownership to help our customers gain a big advantage in this cut-throat competitive contemporary world. To ensure the quick turn around time, we make huge stock of connectors, terminals, wire seals, wires, PVC, clips...at all times to react quickly. We even have our own tooling workshop and 3D prototyping technology to make custom components, which better assists the custom wiring process.
Wiring harness assembly is typically done manually due to the many different processes involved, so we have abundant skillful workers and crafts in our factory.� Additionally, weâ??re increasing the automation facilities, such as automatic cut, strip, terminate, etc. machines to fulfill semi-automation production aiming to improve productivity and shorten� lead time.
Wire Harness Manufacturers China is a reliable supplier of automotive connectors, housings, housings, terminals and silicone rubber seals, fuse boxes and entire wire/cable assemblies. Harness Supplier provides Custom Cable Solution.
ECU Conversion Harness Custom Ecu Wiring Harness Harness Supplier In China
Solution for Automotive Wiring Harness
With years of experience in wire harness manufacturing, Kinkong Wire Harness can provide complete solutions for a wide range of different applications in the automotive industry. We produce wiring harness for engine, light & lamp, sensor, ignition coil, accelerator pedal, fuel injection, car radio, chassis, etc, but not limited to the above mentioned. Weâ??re looking forward to getting inquiry from you.Ã? Click hereÃ? to find out more.Ã?Â
Overview
Kinkong Wire Harness is a derivative brand of KINKONG, mainly focus on the custom wire harness assembly and over-molding service for after-market and tuning-market in the vehicle industry, including cars, motorcycles, racing cars, agricultural machinery, mining machine, ATV, superbikes, scooters, e-bikes, sea-doo, Can-Am...
We began from very small pigtail harnesses and have grown to be a very specialized and quality-ensured wiring manufacture for more intricate wiring harnesses, from auto lamp harness, engine harness, to chassis harness, and all the customized harness if needed.
Our mission is to provide our customers with super qualified products & services with a low total cost of ownership to help our customers gain a big advantage in this cut-throat competitive contemporary world. To ensure the quick turn around time, we make huge stock of connectors, terminals, wire seals, wires, PVC, clips...at all times to react quickly. We even have our own tooling workshop and 3D prototyping technology to make custom components, which better assists the custom wiring process.
Vehicle Wiring Harness Manufacturer specializes in providing Customized Car Wiring Harness, you have any question on Cable Harness, Automotive Wire Loom, Wiring Loom. We will give the professional answers to your questions.
fuse box cable harness Vehicle Wiring Harness Manufacturer harness supplier in china
Solution for Automotive Wiring Harness
With years of experience in wire harness manufacturing, Kinkong Wire Harness can provide complete solutions for a wide range of different applications in the automotive industry. We produce wiring harness for engine, light & lamp, sensor, ignition coil, accelerator pedal, fuel injection, car radio, chassis, etc, but not limited to the above mentioned. Weâ??re looking forward to getting inquiry from you.Ã? Click hereÃ? to find out more.Ã?Â
Vehicle Wiring Harness Manufacturer specializes in providing Customized Car Wiring Harness, you have any question on Cable Harness, Automotive Wire Loom, Wiring Loom. We will give the professional answers to your questions.
WIRE-LOOM-ECU-p03 Custom Motorcycle Wiring Harness Custom Made Wiring Harness
for bike flash ecu, PCM-ECM-ECU fuel injected models
With years of experience in wire harness manufacturing, Kinkong Wire HarnessÃ? can provide complete solutions for two-wheeler vehicles, such as motorcycles, super-bike, scooters and etc. We produce from simple pigtails to complete wiring harness assembly. Weâ??re looking forward to getting inquiry from you.Ã? Click hereÃ? to find out more.Ã?Â
Overview
Kinkong Wire Harness is a derivative brand of KINKONG, mainly focus on the custom wire harness assembly and over-molding service for after-market and tuning-market in the vehicle industry, including cars, motorcycles, racing cars, agricultural machinery, mining machine, ATV, superbikes, scooters, e-bikes, sea-doo, Can-Am...
We began from very small pigtail harnesses and have grown to be a very specialized and quality-ensured wiring manufacture for more intricate wiring harnesses, from auto lamp harness, engine harness, to chassis harness, and all the customized harness if needed.
Our mission is to provide our customers with super qualified products & services at a low total cost of ownership to help our customers gain a big advantage in this cut-throat competitive contemporary world. To ensure the quick turn around time, we make huge stock of connectors, terminals, wire seals, wires, PVC, clips...at all times to react quickly. We even have our own tooling workshop and 3D prototyping technology to make custom components, which better assists the custom wiring process.
Wire Harness Manufacturers China is a reliable supplier of automotive connectors, housings, housings, terminals and silicone rubber seals, fuse boxes and entire wire/cable assemblies. Harness Supplier provides Custom Cable Solution.
Our mission is to provide our customers with super qualified products & services at a low total cost of ownership to help our customers gain a big advantage in this cut-throat competitive contemporary world. To ensure the quick turn around time, we make huge stock of connectors, terminals, wire seals, wires, PVC, clips...at all times to react quickly. We even have our own tooling workshop and 3D prototyping technology to make custom components, which better assists the custom wiring process.
Our distinct customized service includes the following:
Wire Harness ,Wire Cable, Package, Delivery & Logistics
As we position us as a one-stop service solution provider for custom wiring harness, we will follow up your project cases from start to finish. To complete a custom wire harness order with us, here's a quick guide for you to make it easier happen.
A.An Inquiry of custom specific wire harness
B.Sample/drawing or specific description of the wire harness are required for us to make prototype.
C.Engineer's evaluation & Make samples' prototype.
D.Organize delivery & Feedback of samples from customer
E.Mass production after samples approved.
Harness Supplier In China provides Custom Wire Harness Fabrication and oem&odm Motorcycle Wire Harness services. Our innovative team of engineers and advanced ultra-precision mold technology will provide simple and efficient solutions to improve your profitability.
Wire Harness Replacement With 8 Pin Connector For Motorcycle Custom Motorcycle Wiring Harness
Introduction Of Kinkong
We are a reliable supplier at automotive connectors, enclosures, casings, terminals & silicon rubber sealings, fuse boxes and the entire wiring/cable assembly, in global automotive top tuning market and after market.
Our mission is to customize solutions for both individual customers and companies to help them gain a worldwide competitive market by providing outstanding technologies and supreme qualified products with a total effective cost.
Whether you're in search of an integrated wiring assembly or an individual component, our innovative engineer team and adavanced ultra precision tooling technology will provide simple but efficient solutions, increase your profitability. In the meanwhile, it keeps us active and expanding in the related industry area.
Our Concept
Our customers are the companies of kinds of scales from all over the world. Whether they are a Fortune global 500 company, a small start-up, or an SME, they have one thing in common: they rely on our high-quality products and fast responsive service. This serves to remind us that we are really about you â?? our customers. Our business is about your business â?? helping your company to create value for your customers. Weâ??re always happy to communicate with you and take advantages of our years of experience to provide solutions and offer quotes for any of your upcoming needs.
Kinkong Wire Harness is a Custom Motorcycle Wiring Harness solution for individual customers and companies. If you have any questions about Custom Motorcycle Wiring Loom, you can contact us!
WD676 Harness ACC branch KIT HM090 type 4P Honda OP coupler 1 Custom Honda Wiring Harness
We are a reliable supplier at automotive connectors, enclosures, casings, terminals & silicon rubber sealings, fuse boxes and the entire wiring/cable assembly, in global automotive top tuning market and after market.
Our mission is to customize solutions for both individual customers and companies to help them gain a worldwide competitive market by providing outstanding technologies and supreme qualified products with a total effective cost.
Whether you're in search of an integrated wiring assembly or an individual component, our innovative engineer team and adavanced ultra precision tooling technology will provide simple but efficient solutions, increase your profitability. In the meanwhile, it keeps us active and expanding in the related industry area.
Wire Harness Manufacturers China is a reliable supplier of automotive connectors, housings, housings, terminals and silicone rubber seals, fuse boxes and entire wire/cable assemblies. Harness Supplier provides Custom Cable Solution.
1001 Electric Components Suppliers
Short on time? Let Electric Components sellers contact you.
