Power 1200W LED Qty 96pcs 5W LED & 8pcs 90W COB Voltage AC85-265V Work frequency 50/60Hz Lumen 21050Lm Dimmension 848X385 X118mm N.W 14.8kg Coverage 1.5 X1.0 m Warranty 50000 hours
LED light.
For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. • 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb • Wattage: 10W • Blue UV light • Lumen: 900-1000lm • Color Temperature (CCT): 6500K • Input Voltage: AC 90-130V & 220v-240V • With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.
3w 5w 355nm UV nanosecond laser marking and printing medical packaging date More UV laser, pls contact us! Website: www.rfhtech.com Whatsapp: +8618928466502 Email: export06@rfhlasertech.com Benita from Brazil recently came to RFH, hoping to help her medical packaging line find a suitable new technology for marking dates. RFH 3w 5w 355nm UV nanosecond laser is a good choice. In the past, most of the production dates on the band-aids were carried out by inkjet coding technology. The ink marks on the marked products were uneven and unsightly, and the inner surface was deformed and easily altered. The ink needs to be replaced continuously during the marking process, and continuous In use, there must be a special person to take care of it. The 3w 5w ultraviolet laser completely avoids the above-mentioned problems and avoids possible risks. The products marked by ultraviolet laser have good visual effect, no need to worry about tampering, and have the effect of anti-counterfeiting. In addition, the ultraviolet laser does not require other materials such as ink to participate, and can be operated as long as it is plugged in. The cost is low and there are no consumables, and the operation is simple and does not require special care. At the same time, UV laser marking does not produce any dust or ink pollution, and has no harm to the human body and the environment. It is an environmentally friendly green high-tech product.
Product: Voice AI Remote Control for Air Conditioners and Fans Model: SV-01 Net weight: 30g size: 33x33x61mm Interface: USB A Volt: 5V Cert: CE FCC No APP needed, just plug-and-play Voice: English or OEM language Quotation: 1. Trail order 50pcs Landed your country USD6.5/pc 2. MOQ 5000pcs FOB CHINA USD4.60/pc We are a Hong Kong manufacturing-based company.
We are the leading supplier for the LED LIGHT & ACCESSORIES.
RFH 532nm green laser drills holes in glass, smooth without bursting The green laser uses an extremely small spot for drilling. The high-quality beam and small focusing class enable it to achieve the ultra-fine marking requirements of glass products. The high-frequency nanosecond green laser of RFH Laser Co., Ltd., It can perform various types of rapid finishing on thin glass and tubular glass of various materials. Nanosecond green laser glass drilling equipment has achieved many successes in the field of deep processing of glass such as soda lime glass, borosilicate glass, and quartz glass. case, Compared with customers of glass laser drilling equipment, RFH green laser was selected as the preferred supplier Manager Su from a multinational company has always wanted to find a glass laser drilling equipment company that can achieve high-quality and fast glass processing. He compared many companies and could not find a company he liked. After a friend's introduction, he found RFH company. . Consistently good quality makes RFH nanosecond green lasers applauded by customers RFH has rich experience in the laser industry and good performance, and continues to create high-quality, high-durability, high-efficiency and value-added laser products for customers, which are widely praised by the market. After a detailed inspection of the company, Manager Su decisively ordered a batch of nanosecond green lasers. After receiving the order, RFH started work around the clock and completed the order ahead of schedule. After receiving RFH's products, it quickly put into production, and quickly showed Taking advantage of the high-efficiency and high-quality green laser, it has won great approval from Manager Su. The company will, as always, develop and innovate, deeply cultivate the industry, refine the products, and strengthen the enterprise.
Size: 0501, 0502, 0701 L: 0.18mH~21mH
Size: 0400 / 0401, 0402, 0802, 0804, 0810, 1306 / 0403, 0504, 0703, 0705, 1004, 1005, 1005B L: 0.33µH~4700mH
Ultraviolet laser 355nm superior beam quality ensures high precision and high stability of ceramic marking Ultraviolet laser in the ceramic industry has the advantages of high stability, fast engraving speed, low cost, no consumables, high accuracy, convenient operation, good effect, strong adaptability and wide application range. In order to better meet the needs of customers, RFH has been committed to the research and development of laser systems for many years, and has built a 355nm UV laser, which is widely used in PE/PCB/FPC cutting, glass, sapphire cutting and high-precision micro-machining drilling. , scribing, cutting and other fields, greatly improving the efficiency of stripping, making production more efficient. RFH loyal fans buy 355nm UV laser to mark ceramics again This time, Manager Chen of a large ceramic factory purchased a batch of RFH 355nm UV laser marking ceramics. After experiencing the efficiency and convenience brought by 355nm UV laser, Manager Chen became a loyal user. Manager Chen said that the RFH laser technology has been forging for many years, and the technology has become more and more perfect, especially the unique Q-switching control technology of this 355nm ultraviolet laser, which provides a laser wavelength of 354.7nm, and its superior beam quality can ensure that it is in all frequency ranges. It can work strictly and is suitable for various laser application control requirements, which greatly meets the needs of the company and improves the production efficiency of the factory. Creating value for customers is its mission, RFH is committed to creating high-end UV nanosecond lasers Manager Chen firmly stated that he will maintain long-term cooperation with RFH. Such a company that takes creating real value for customers as its own responsibility and pursuing excellence as its goal is trustworthy. RFH will meet customer needs as its own responsibility, continue to innovate, create more high-quality products, serve customers, and give feedback to the society.
RFH 532nm green laser can mark the glass bottle quickly and safely Compared with plastic feeding bottles, children's glass feeding bottles are safer when adding hot water, and are more prominent in terms of heat preservation and transparency. The 532nm nanosecond green laser is safe and secure in marking children's glass feeding bottles A few years ago, a manufacturer of children's glass baby bottles reached a cooperation with RFH and purchased a nanosecond green laser that had just been developed at that time for marking children's glass baby bottles. RFH's production workshop adopts a dust-free workshop design, which has achieved the ultimate in safety, professionalism and environmental protection, which shows that RFH attaches great importance to production. The two green lasers accepted by the customer can scribble on glass milk bottles with an accuracy of about 0.2mm, and the scribing speed is very fast, which can be completed within a few seconds. To ensure the safety of children's food, RFH 532nm green laser is obliged Moreover, the RFH nanosecond green laser can be operated as long as it is plugged in, and the short pulse, high beam quality and high peak power emitted by the light spot can be used for extremely superior applications on glass, allowing the marking of glass milk bottles in all aspects. much easier. In addition, what attracts this manufacturer is RFH's craftsmanship and professionalism. It has been deeply moved by its more than ten years of research and development experience. RFH 532nm Green Laser The cooperation that RFH reached with customers a few years ago still maintains close contact with customers a few years later, and provides customers with free lifetime technical support to benefit more manufacturers.
RFH 532nm green laser can mark the glass bottle quickly and safely Compared with plastic feeding bottles, children's glass feeding bottles are safer when adding hot water, and are more prominent in terms of heat preservation and transparency. The 532nm nanosecond green laser is safe and secure in marking children's glass feeding bottles A few years ago, a manufacturer of children's glass baby bottles reached a cooperation with RFH and purchased a nanosecond green laser that had just been developed at that time for marking children's glass baby bottles. RFH's production workshop adopts a dust-free workshop design, which has achieved the ultimate in safety, professionalism and environmental protection, which shows that RFH attaches great importance to production. The two green lasers accepted by the customer can scribble on glass milk bottles with an accuracy of about 0.2mm, and the scribing speed is very fast, which can be completed within a few seconds. To ensure the safety of children's food, RFH 532nm green laser is obliged Moreover, the RFH nanosecond green laser can be operated as long as it is plugged in, and the short pulse, high beam quality and high peak power emitted by the light spot can be used for extremely superior applications on glass, allowing the marking of glass milk bottles in all aspects. much easier. In addition, what attracts this manufacturer is RFH's craftsmanship and professionalism. It has been deeply moved by its more than ten years of research and development experience. RFH 532nm Green Laser The cooperation that RFH reached with customers a few years ago still maintains close contact with customers a few years later, and provides customers with free lifetime technical support to benefit more manufacturers.
For wafer scribing and dicing, you need the sharp edge of the UV laser Wafer is the basic material used to manufacture IC. It is made into long silicon ingots after purification of silicon elements. When making integrated circuits, semiconductor materials should be used to melt polysilicon out of monocrystalline silicon ingots through multiple procedures, and then cut to produce Made. As an electronic component, it is used in many electronic products. The wafer area is usually small, so there is a high precision requirement in cutting and scribing. Return visit UV laser scribing on the wafer, what's the customer's comment has recently welcomed a number of return visits from . Among them, has been ordering cooperation with for five years. He is the first batch of manufacturers to use UV lasers for wafer scribing. At that time, UV lasers were not widely used, and after tried to scribe the wafer surface, immediately chose to visit and witness the possibility of wafer scribing. Standing in the wave of laser technology, UV lasers win customers hearts with their strengths For him, the traditional process of scribing the wafer surface has insufficient precision, slow speed, and many consumables that have plagued him for a long time. During the visit of , he witnessed the spot emitted by the UV laser continuously moving on the tiny wafer. It only took more than ten seconds to complete the complex scribing, and it was able to automatically complete the scribing without the involvement of employees. conduct. 24 hours of stable continuous operation and super long life can also satisfy the assembly line of Moreover, in addition to the non contact processing of the material during operation, it only needs to be plugged in and no other auxiliary materials are needed to be lost, which greatly reduces the cost and waste. The 24 hour stable continuous operation and ultra-high life span can also satisfy the assembly line of Therefore, chose the ultraviolet laser at the beginning and has used it until now. Nanosecond UV Laser Every time there is a breakthrough in the research and development of UV lasers, understanding and congratulations. like many other customers, stands in the wave of laser technology, progresses and learns together with , and establishes a revolutionary friendship. Develop in different fields.
RFH nanosecond green laser used to mark Italian customers' home appliance Today, with the continuous development of home appliances, the appearance of the home appliances and the information marking of the home appliances are particularly important. The RFH nanosecond green laser has recently been loved by Italian customers. He expressed interest to RFH through video and watched RFH's marking demonstration of its samples. The unique Q-switching technology of the 35W green laser can be adapted to the marking machine of Italian customers The RFH green laser is different from traditional markers. It uses the laser wavelength to make non-contact scribing on the surface of the material. The repetition frequency is wide and the single pulse can reach about 200kHZ. The superior quality beam ensures strict speed and quality in all frequency ranges. The smaller processing heat-affected zone minimizes the consumption of materials and greatly reduces the cost of compliance. RFH 532nm green laser takes Italian customers to a new level in the field of marking It is worth mentioning that RFH adheres to the spirit of independent innovation and uses unique Q-switching control technology to make green lasers suitable for various laser application control needs. Of course, it is not difficult to operate a machine such as RFH that has a very high marking quality and a fast reaching speed. Instead, it uses all-digital intelligent power control technology, which can perform real-time monitoring while simple operation. The integrated design, convenient equipment integration, externally controllable laser, and various conveniences made this Italian customer quite satisfied, and he immediately reached a purchase agreement and hoped to transport it as soon as possible. RFH Nanosecond Green Laser The RFH nanosecond green laser that arrived in Italy surprised customers. After being put into use, the customerâ??s products received more praise. For RFH, the successful development of the nanosecond green laser also brought RFH to a new level. Let them continue to move forward in the field of green lasers.
Wholesale Used A Grade for iPad High Quality Smart Second tablets Unlocked Original Apple iPad
The leading industrial solid-state laser manufacturer 355nm UV laser cold processing FPC flexible circuit board can avoid stress, burrs and dust. FPC flexible circuit boards need to use ultraviolet laser drilling, cutting, and scribing technology. Ultraviolet laser can prevent FPC flexible circuit board from breaking when drilling and cutting Our common mobile phones, TVs, computers, kitchen induction cookers, rice cookers, range hoods, chargers, remote controls and other electronic devices all need FPC flexible circuit boards. When designing the corners of the FPC soft board, if the design is not right, the FPC flexible circuit board is prone to breakage. For the mobile phone field, it requires narrower and thinner, in order to avoid the case of scratching and breaking with the shell in the FPC through hole of the mobile phone B/C part, it is necessary to use ultraviolet laser cutting and scribing technology. Ultraviolet laser is a cold light source with low thermal influence, and the focused spot can be as small as 15um. There will be no deformation or scorching of the FPC circuit board due to the high energy of the laser beam. It is very suitable for FPC flexible circuit boards during Micro-hole drilling processing.
Non Stretchable, Non bendable, Rubber coat, for hand-hold talkie. Thanks&Best Regards, Frequency Range: 240-270MHz, 240-270MHz, 136-174MHz, 145/435MHz, 400-470MHz. Impedance: 50 VSWR: 1.5 Gain: 2.15dBi (240-270MHz,) 2.15/3dBi (145/435MHz) 3dBi (400-470MHz) Polarization: Vertical Radiation: Omni Maximum Power Input: 20 W Height: 405+3mm Termination: SMA-M/F/BNC Radom Material: TPEE/Cooper Color: Black/Yellow/White/Red/Green/Blue/Gold/Silver
355 nm Ultraviolet Laser manufacturer 3W5W UV laser As the leading industrial solid-state laser manufacturer, RFH laser company offer 355nm ultraviolet laser, 532nm green laser and customized laser for a broad range of commercial, industrial, and scientific applications. To meet the market demand, RFH newly developed S9 series UV laser in 2020. Comparing with its kinds, S9 series UV laser features with ultra-compact, high stability, high efficiency, high reliability and excellent laser beam quality.Its compact design suggests no necessity in building big light path, which greatly reduces space and cost and makes it easy to be installed into UV laser marking machines. In addition, S9 series cavity structure is more stability and more excellent scalability, which means the same laser cavity can be produces multi-power lasers , and the stability of different power ranges is greatly improved S9 series uv laser characteristicsï¼? 1. Laser wavelength at 354.7nm, repetition rates cover a wide range(1 kHz to 200 kHz internal adjustable); laser power ranging from 3w-10w; 2. Exceptional beam quality (M²
Size: Ã?95*49mm Cut hole - 82-88mm Lumen output: 610-735lm Power: 8 watt Beam angle: 36 / 60 Color temperature: 3,000K / 4,000K
Size: 95*49mm Cut hole - 82-88mm Lumen output: 610-735lm Power: 8 watt Beam angle: 36 / 60 Color temperature: 3,000K / 4,000K
