High water-reducing rate: High water reduction efficiency at low dosage, giving the material system excellent flow. It can effectively improve the compactness and strength of the system, and the highest water reduction rate can reach 40%. High dispersibility: It has excellent dispersing ability, can absorb quickly and reduce mixing time.What's more,it endows the material system excellent workability and workability,therefore improves construction efficiency.It meets different construction requirements. High adaptability: It has good adaptability to various cement-based systems like ordinary Portland cement,sulfoaluminate cement system and Portland cement-sulfoaluminate cement composite system, and can be used with other additives such as: Defoamer, retarder, redispersible latex powder, cellulose, etc. Early strength and high strength:By adding PC-1008, concrete performs excellent early strength and enhancement effects. Under the same conditions, the early strength and enhancement effects of this product are higher than other types of superplasticizers, and the dosage can be relatively reduced. High durability:PC-1008 enhances the compactness of the hardened slurry, improves the impermeability, erosion resistance and chloride ion penetration resistance, improves shrinkage and creep properties, and reduces cracks. Green and safe: It does not contain harmful substances and is an environment-friendly material.
High water-reducing rate: High water reduction efficiency at low dosage, giving the material system excellent flow. It can effectively improve the compactness and strength of the system, and the highest water reduction rate can reach 40%. High dispersibility: It has excellent dispersing ability, can absorb quickly and reduce mixing time.What's more,it endows the material system excellent workability and workability,therefore improves construction efficiency.It meets different construction requirements. High adaptability: It has good adaptability to various cement-based systems like ordinary Portland cement,sulfoaluminate cement system and Portland cement-sulfoaluminate cement composite system, and can be used with other additives such as: Defoamer, retarder, redispersible latex powder, cellulose, etc. Early strength and high strength:By adding PC-1008, concrete performs excellent early strength and enhancement effects. Under the same conditions, the early strength and enhancement effects of this product are higher than other types of superplasticizers, and the dosage can be relatively reduced. High durability:PC-1008 enhances the compactness of the hardened slurry, improves the impermeability, erosion resistance and chloride ion penetration resistance, improves shrinkage and creep properties, and reduces cracks. Green and safe: It does not contain harmful substances and is an environment-friendly material.
Titanium Dioxide Rutile
Iron oxides and oxyhydroxides are widespread in nature and play an important role in many geological and biological processes. They are used as iron ores, pigments, catalysts, and in thermite, and occur in hemoglobin. Iron oxides are inexpensive and durable pigments in paints, coatings and colored concretes.
PMMA (Acrylic) light diffuser is embedded with specific optical chemicals. It creates a snow-white color, brighter, and more uniform effect for back-lit lightbox, ceiling lighting, and other decorative applications. Various colors such as red, blue, yellow are also available. thickness: 3, 5mm finish: gloss, single-matte, double-matte size: 800mm x 1220mm UV stable: upon request by order
Soda ash, sodium sulphate, sodium bicarbonate,.
OST Photonics can supply lithium niobate (LiNbO3) wafers, lithium tantalate (LiTaO3) wafers, quartz single crystal wafers, various glass and fused silica wafers, GaAs wafers, SiC wafers, InP wafers, sapphire (Al2O3) wafers, Ge wafers and Si wafers in different specifications. Square plates, blanks and crystal boules are also available upon request. Other single crystal substrate materials including MgAl2O4, MgO, SrTiO3, LaAlO3, GGG, DyScO3, GdScO3, TbScO3, KTN, PMN-PT, LSAT, SrLaAlO4, YAG, YAlO3 (YAP) are also available on request. î?? What is the Difference Between SAW Grade Material and Optical Grade Material? Optical grade materials are materials with low strain and no impurities, they are grown from the best raw materials at a relatively slow growth rate, and are often used in optical applications where the highest quality is required. Optical grade wafers are widely used in optical devices and require excellent optical performance. SAW grade materials are primarily used in non-optical applications, and their growth raw materials rank second only to optical grade growth raw materials. The growth rate of this material is faster than that of optical grade material, which benefits mass production and cost-effectiveness. In general, these grades of wafers vary in material quality and use. Optical grade wafers are considered to be of the highest quality, while SAW grade wafers are relatively lower in price. The selection of the appropriate wafer grade is crucial, depending on the specific application and material quality requirements.
OST Photonics CdWO4 Scintillators(Cadmium Tungstate Scintillators) CdWO4 Cadmium tungstate crystal is a high density, high atomic number scintillator with a relatively high light yield. The emission maximum is at 475nm and the total light output is 12 to 15 photons/keV. The light yield relative to NaI(Tl) on a bialkali PMT is 30 to 50%. In addition, CdWO4 Scintillator cadmium tungstate scintillator also has the advantages of strong radiation resistance and no radioactive background. The high light output and low afterglow make it ideal for use with silicon photodiodes in detectors for medical and industrial Computed Tomography (CT) scanners. OST Photonics is able to supply CdWO4 crystals cadmium tungstate scintillator and CdWO4 linear or 2-D array upon your requests.
Ester alcohol C-12 is premier coalescent for latex paints,especially performs well in all kinds of acrylic acid ester,styrene,vinylacetate as raw materials and synthesis of various latex agent and other water-based paint system.
HONGYE HOLDING GROUP CORPORATION LIMITED can produce 20000MT Furfural per year. Furfural is used as a solvent in petrochemical refining to extract dienes (which are used to make synthetic rubber) from other hydrocarbons. Furfural, as well as its derivative furfuryl alcohol, can be used either by themselves or in together with phenol, acetone, or urea to make solid resins. Such resins are used in making fiberglass, some aircraft components, and automotive brakes.
Hongye Chemical Co., Ltd is the leading professional manufacturer and supplier of Thiourea Dioxide and pulp bleaching agent FAS. We can produce 50000MT Thiourea Dioxide(Formamidine sulfinic acid) &pulp bleaching agent FAS. Pulp bleaching agent FAS is one kind excellent pulp and paper bleaching agent, it can be used in reduction bleaching,waster paper deink bleaching. It is very stable in air and can be used under the normal equipments. Because of high reducibility and good stability, it is very suitable for high temperature continual bleaching, and there is good for environment, does not increase the waste water pollution load, conforms to the environmental protection requirements.
Hongye Chemical Co., Ltd is the leading professional manufacturer and supplier of Thiourea Dioxide and pulp bleaching agent FAS. We can produce 50000MT Thiourea Dioxide(Formamidine sulfinic acid) &pulp bleaching agent FAS. TDO is a new kind of reducing agent that used as exchange of sodium hydrosulfite. It is widely used in textile and paper making industry. This product is also used in leather processing industry, paper, pulp and board industry, photographic industry, bleaching and reducing agents. This product is also a component of decolorisation agents. In macromolecule material industry, it is used as catalysis agent and stabilizer of resinic producing, and it is also used in organic synthesization of sensitizing material, and medicine, medical, spicery materials in fine chemicals, and also can be applied in the recycling and separating of heavy metals.
Other name:sodium carbonate peroxide,solid hydrogen peroxide,SPC Appearance:free flowing white granules CASNo.:15630-89-4 UN No.:3378 Hazard level:5.1 Packing:25kg woven bags or kraft paper bags 100kg or 1000kg container bags
Our main products: L-Phenylglycine,cas 2935-35-5; Glycine;cas 56-40-6; Glycine hydrochloride;cas6000-43-7 DL-Alanine,cas 302-72-7; L-Alanine,cas 56-41-7; DL-Methionine,cas 59-51-8; L-Cystine,cas 56-89-3; L-Cysteine,cas 52-90-4; L-Cysteine monohydrochloride,cas 52-89-1; L-Valine,cas 72-18-4; L-Arginine,cas 74-79-3; L-Leucine, cas 61-90-5; L-Tyrosine,cas 60-18-4; L-Threonine,cas 72-19-5; L-Tryptophan,cas 73-22-3; L-Glutamic acid,cas 56-86-0; L-Phenylalanine,cas 63-91-2; L-Isoleucine,cas 73-32-5; L-Methionine,cas 63-68-3; L-Citrulline,cas 372-75-8; L-Aspartic Acid,cas 56-84-8; L-Glutamine,cas 56-85-9; L-Serine,cas 56-45-1; �²-Alanine,cas 107-95-9; L-Lysine,cas 56-87-1; L-Proline,cas 147-85-3; L-Histidine,cas 71-00-1; L-lysine hydrochloride,cas 657-27-2; Glycine hydrochloride,cas 6000-43-7; Welcome to inquiry!
Ethyl acetate good price cas 141-78-6 factory Ethyl acetate supplier 141 78 6 low price cas141-78-6
Valerophenone 1009-14-9 large stock cas1009-14-9 large stock 99% pure Valerophenone best supplier 1009149 cas 1009-14-9 price 1009 14 9 China supplier 1009-14-9 price 1009149 manufacturer
PCBN is multicrystalline structure of CBN which been produced by high pressure high temperature(HPHT) sintering of cubic boron nitride(CBN) with binder. It is with high hardness, good thermal stability, thermal conductivity and impact toughness. CBN can be resistant to temperature of 1400 to 1800 .
Cerium-doped Lutetium Yttrium Orthosilicate or LYSO(Ce) scintillator has the advantages of high light output, high density, short decay time, excellent timing and energy resolution. These properties make LYSO(Ce) becoming the most popular scintillators in Nuclear medicine (Positron Emission Tomography, PET/CT, and SPECT scan system), high energy physics, security scanners, and other applications. OST Photonics has a complete set of crystal processing and assembly line, we can process all kinds of lyso scintillation crystal and LYSO(Ce) arrays according to customer's requirements. We have our own laboratory to test the product performance to ensure that the product performance meets the requirements of our customers. We provide professional solutions for lyso crystal growth, surface treatment and array assembly. Application of LYSO Ce Scintillators (LYSO:Ce Scintillators) Positron emission tomography-computed tomography (PET-CT) Nuclear magnetic resonance imaging (NMRI) Single photon emission computed tomography (SPECT) High energy physics Advantages of LYSO scintillator (LYSO:Ce Scintillators) High light output High density Short decay time Stable chemical and physical lyso scintillator properties The Ability of OST Photonics Maximum Size: 105mm x 200mm Available items: monolithic crystal, scintillation screen, pixellated array
Li-6 lithium glass scintillator is a kind of inorganic scintillator which can be used for thermal neutron detection. It has the advantages of short decay time, high efficiency of slow neutron detection and good temperature performance. In addition, the Li-6 glass scintillator is easy to process and form, non-hygroscopic, acid and alkali resistant, can withstand the high and low temperature rapid change. Therefore, in the harsh situation that contains corrosive liquid and vapor, the lithium glass (Ce) can still work, but other scintillators cannot be suitable. Li-6 glass scintillator are widely used in neutron time-of-flight experiments, oil and natural gas exploration, moisture content measurement, nondestructive testing and neutron photography. OST Photonics can provide different specifications of Li-6 glass scintillators according to your requirements. Neutron time-of-flight experiments Oil and natural gas exploration Moisture content measurement Nondestructive testing(NDT) Neutron photography Advantages of Li-6 Glass Scintillators Fast decay time High efficiency of slow neutron detection Good temperature performance Non-hygroscopic The Ability of OST Photonics Maximum Size: �¸50mm x 50mm Available items: monolithic glass
Crystals such as sodium chloride (NaCl), potassium bromide (KBr) and potassium chloride (KCl) are uniform, bright and high transmittance within 0.250-20 �¼m when thickness less than 10mm, and no impurity absorption. These single crystals are ideal materials for making optical elements for prisms, lenses, filters, and various windows in infrared devices and optical instruments. OST Photonics offers high quality KBr substrates for researchers and industries. Crystal orientation, size and thickness can be customized according to your requirements. Application of KBr Substrates Infrared devices optical instruments Advantages of KBr Substrate Uniform, bright and high transmittance within 0.250-20 �¼m when thickness less than 10 mm No impurity absorption Ability of KBr Substrates Orientation:,,, etc. Dimension: 1, 2, 10x10mm, 20x20mm, etc. Thickness: 0.5mm, 1.0mm, 2mm, 5mm, etc. Available items: windows, substrates, blanks and customized optics
