Knitted fabric.
Real-time waveforms: Paw, Flow, Volume, EtCO2, SPO2 Optional: CO2, SPO2 (related parameters) Loops: P-V, V-Flow, Flow- P Trends: 1s, 5s,1min,10min, 30min, 60min Tidal volume: 5 to 2000mL PEEP/CPAP: 0 to 30 cmH2O Oxygen: 21 to 100% I:E ratio: 1:10 to 4:1 Inspiratory time (TI): 0.2 to 5 s Flow trigger: 0.2 to 15 l/min Pressure trigger: -0.5 to -20cmH2O Pressure control: 5 to 90 cmH2O, added to PEEP/CPAP Pressure support: 0 to 90 cmH2O, added to PEEP/CPAP Pressure ramp: 0 to 2s Expiratory trigger sensitivity (ETS): OFF, 5 to 90 % of inspiratory peak flow Peak flow Spontaneous: > 210 L/min Input voltage: 100 to 240V ~ �?�±10 %, 50 / 60 Hz AC or 24 VDC�?�±10 % Power consumption: 50 W typical Protection class: Class I Backup battery: batteries(5200mAh each)/ hot swappable Oxygen supply: 280 to 600 kPa (41 to 87 psi), 120 L / min Low pressure: oxygen �¢?�¤15 L / min, max. 600 hPa for low pressure Operator-adjustable: Low/high minute volume, low/high pressure, low/high tidal volume, low/high rate, apnea time, low/high oxygen Optional: low/high CO2, low/high SPO2 Special alarms: Oxygen concentration, disconnection, loss of PEEP, exhalation obstruction, flow sensor, power supply batteries, gas supply Loudness Adjustable: 1 to 9 Event log: Storage and display of up to 1000 events with date and time stamp Weight: < 45.3 kg Dimensions(WxHxD): Approx. 600x402x415mm
Purity 99.97%- 99.99% (Rejection below 99.97%) Product Origin SOUTH AFRICA/TANZANIA/ZAMBIA/DRC/BOLIVIA Contract Period Year (12 Months) Monthly Delivery 2500 MT per month Trial 1000 MT (MINIMUM) PRICE CIF - 13% LMI DISPATCH PORT Any Peaceful Port Payment Terms 30% UPON INVOICE, 70% AGAINST SHIPPING DOCUMENTS/SGS/BL/DLC MT700, 100% IRREVOCABLE, TRANSFERABLE, CONFIRMED, AUTO REVOLVING (payment after discharge) Performance Bond 2% for each supply Inspection SGS or any other international inspection at loading and at discharge port Dimensions 914 mm x 914 mm x 12 mm (LME Standards) App 36 X36X0.5 Weight of each sheet 125 Kilograms (Approximately ± 2%) Net weight of each pallet 2.500 Kilograms (Approximately �±2%) Net weight per container 25.0 Metric Tons (Approximately ± 2%) Gross weight per container 27.5 Metric Tons (Approximately ± 2%)
RBD Soyabean Oil FOB Port Klang, Malaysia FOB Port Nhava Sheva, India 12 x 1 Lt SQ Transparent Bottle, 1870 cartons, 20.196 Mt 6 x 2 Lt SQ Transparent Bottle, 1582 cartons, 17.0856 Mt 6 x 3 Lt SQ Transparent Bottle, 1079 cartons, 17.4798 Mt 4 x 5 Lt SQ Transparent Bottle, 1063 cartons, 19.134 Mt 18 Lt Jerrycan, 1439 jerrycans, 23.3118 Mt
10lt jerry can 2487jcn/FCL 18lt tin 1296 tins per FLC lead time : 3-4 weeks OEM, MOQ is 4FCL
Rechargeable By Solar Panel And 220 V (cable And Charger Must Be Provided With The Lamp charger Can Be Integrated Or Separate) Battery Charging Indicator Light, Female USB Outlet To Charge A Mobile Phone, Female Micro- USB Inlet For Connecting The Solar Panel Or The Charger, 2 Positions Only, High Beam And Low Beam, Charge Cycles: Low Self Discharge,500+charges Charging Out Let(USB-a)
- 100% free from sulfur-based accelerators - No latex protein to cause allergy - Excellent softness and wearing fitness - Undifferentiated shelf life as normal gloves - Well suitable for high cleanliness industry like electronic, food service, etc.
Purity of oxygen reaches 93%+3% Multiple Ways to use -It comes with two flow-meters having flow from 0-5 liter and 0-10 liter per minute, it can deliver SLPM oxygen with two persons at the same time, and can deliver lOL PM with one person. -It also has atomization function Safety -The machine has audiovisual alarm for power failure, low oxygen level, low pressure
General Characteristics Single-use Sterile Including a mechanism to prevent reuse The syringe and needle shall be passively and automatically rendered unusable by the delivery of the intended fixed dose. And/ Or The auto-disable feature is automatically activated and remains effective from the time that the injection is commenced. And / Or The auto-disable feature is automatically activated on completion of the delivery of the intended fixed dose. Type and application Non-pre-filled, disposable. To administer DTP, DT, tetanus toxoid and diluted freeze dried measles etc for intramuscular and sub-cutaneous injection. Syringes with permanently attached needle Material Polypropylene with or without stainless steel Syringe size with pre-set volume and single marking 0.5ml for immunization (+20% to allow for removal of air) Graduation and accuracy Two markings only: 0 and 0.5ml. The difference between the maximum graduated volume and the expelled volume of distilled water shall not be greater than �± 25 micro-liters. Needle for Immunization · Diameter : 23G Length : 25mm (1) Stainless steel needle tubing for the manufacture of medical devices Needle shall confirm to IS 10654 of 2002 (third revision) equivalent ISO 7864 of 1993 Needle fixing Fixed capped, needle (23 G X 25 mm). Fixed needles should withstand an axial pulling force of 34N without separating from the syringe. If accidental needle stick protection devices are included in the design of the syringes or needle, they should not compromise the ease of use or the performance of the syringe. Leakage : Leakage of distilled water at a pressure of 0.3 mPa (3 atmospheres) for six minutes shall not be greater that 50 micro-liters. Dead space The maximum dead-space shall be 50 micro-liters. Self destruction The syringe shall be automatically rendered unusable when it has delivered a 0.5 ml dose of vaccine or distilled water. Filling The syringe is filled by inserting the needle through the septum of a sealed vaccine vial.
The self testing product is transformed from the professional testing product CLUNGENE COVID 19 Antigen Rapid Test manufactured by Clongene The BfArM has granted the first special approvals according to 11 paragraph 1 of the German Medical Devices Act ( of antigen tests for self administration by laypersons (self tests) for the detection of SARS CoV 2 Our self testing product can be sold and used in Germany Overview of CLUNGENE COVID 1
Aluminum Alloy & Oxford Cloth, 4kg Steel & Oxford Cloth, 7kg Aluminum Surface, 7kg Product Size: 185*50*3cm Folding Size: 92.5*50*7cm Packing Size: 98*53*10cm POLY BAG packed & then Carton 20' - 539pcs, 40' - 1078pcs, 40HQ - 1309pcs
Aluminum Alloy; Oxford Cloth Product Size:185*50*20cm Folding Size: 92*50*9cm Packing Size: 98*53*10cm 20' - 539pcs / 40' - 1078pcs / 40'HQ 1300pcs
Product Size: 69*24*15cm Packing Size: single 19.5*15*70cm Four: 72*42*33cm
Textile fabrics.
Nylon, satin, cotton, TPU film, TTR ribbon and PU tape, RFID.
Cosmetic bags, pu bag, pu wallets, card holder, id card holder, tote bag , cotton bag , polyester bag.Manufacturer
Ladies and Mens t-shirt, dress, polo, jacket, pants with printing and embroidery.
T shirt, electronic, phone accessories, jean, shoes, bag, beauty care, car accessories.Trade & logistic
Model Number:KN95  Type:Reusable  Product name:KN95 PROTECTIVE MASK  Material : non-woven fabric , melt-blown fabric ,hot air cotton Color:White  Certification:FDA/CE/GB2626-2006 Layer: 5  Plys  Keyword:KN95 Protection Mask Size:16x11cm  Style:earloop Weight:8g  Packaging:1PCS/PP BAG 20PCS/COLOR BOX          100COLOR BOX/CTN OEM:support  Sample order:support upply Ability:400000 Piece/Pieces per day  Usage:Personal Respiratory Protection
