Heavy machinery.
Fuel pump and parts, brand: blackmer, goulds, houttuin, ingersoll-rand, milton roy, plenty, pulsafeeder, viking.Installation
Pumps and pump parts, 3rc series co2 injection pump, 5nb series slush pumps, 3gp 5gp steam pump.
Vacuum pumps.
Hydraulic pump, dump pump, parker pump, commercial pump, oil pump, truck pump.
Circulation nomal temperature heat pump unit, circulation low-temperature heat pump unit, circulation heat pump unit for swimming, high temperature air heat pump unit, air heat pump floor heating unit, air heat pump drying unit, air heat pump unit for farm.Manufacture
Industrial Pumps.
Heavy machinery.
3DP Series Oil/Gas Mixture pumps This new generation of oil/gas mixture pumps is designed and built to handle media of either in liquid state or gaseous form, and performs simultaneously both functions of a pump and that of a compressor. 3DP70 has become the latest state of art transfer system for both inland and off shore oil/gas producing operations around the world. With its have high internal compressing power, high throughput, high compression ratio, powerful oil/gas transfer capability and highly effective energy saving characteristics. Capacity: 32-170 m3/hr Suction Pressure: 0.2-0.5 Mpa Discharge Pressure: 1.0-3.2 Mpa Efficiency: >=85% Compression Ratio: 6~8 Gas Content: 0-100% Oil/Water Content: 0-100%
Pump range: Capacity: 8 8980 m3/h Head: 3 60 m Speed: 495 / 590 / 730 /980 /1470 / 2940 rpm Power: 11kW 580kW Voltage: 380V, 6kV or 10kV Discharge Dia.: DN65 DN 1000 Medium Temp.: â?¤ 40 Degree Pump Weight: 128 10000 kg Description: The submersible sewage pumps can meet the needs in the aspects of municipal engineering such as flood control pumping station and integrated pumping station, building construction, industrial sewage, waste water treatment, environmental protection, irrigation etc. They can be used to convey sewage, wastewater and urban sewage which contain solid particles and various long fibers. Our submersible sewage pump can be installed by auto-coupling device (QDC), hard pipe and soft pipe, fixed and movable installation, and dry type installation with cooling jacket.
Pump type MA is the standard heavy duty slurry pump which designed for the continuous pumping of highly abrasive, high density slurries with minmal maintenance requirements. It maintains high eï¬?ciencies over the wear life of its components. This type of pump typically used in process plant transfers, wet waste processes, recycling-washing plant, sand plant duties, heavy minerals processing, mineral recovery and chemical process plant. Pump range: Discharge Size: 1" to 18" Capacity: 4 to 5400 m³/h Heads: 5 to 75 m Typical application: - Mill discharge - Coarse sand - Tailings - Mineral concentration - Heavy media - Coal washing - FGD - Process chemical - Bottom / fly ash - Metal smelting Product features; - Elastomer or high chrome alloy liners provide corrosion & abrasion resistance, plus the interchangeability to reduce the maintenance cost and maximize wear life - Large diameter, high eï¬?ciency impellers designed to oï¬?er maximum wear life and low operating cost, wide options of impeller for speciï¬?c applications - Gland, expeller or mechanical seals are available to suite diï¬?erent working conditions - The bearing can be grease or oil lubricated which oï¬?er ease of maintenance and reduced downtime - The pump can be installed in multi-stage high pressure operation - Large internal passage designed to reduce internal velocities, maximize wear life and lower operating cost Contact us for more information: Amanda Chen +86 19921054564
Centrifugal pump FCL
1)Hydraulic pump for dump truck 2) Flows of 37 and 46 GPM at 1800 RPM 3)Pressures to 2500 psi 4)Speeds to 2400 rpm 5)Choice of mountings 6)Air remote operators available 7)Relief valve protects pump & cylinder 8)All pumps and relief valves are 100% factory tested
1)Hydraulic pump for dump truck 2) Flows of 37 and 46 GPM at 1800 RPM 3)Pressures to 2500 psi 4)Speeds to 2400 rpm 5)Choice of mountings 6)Air remote operators available 7)Relief valve protects pump & cylinder 8)All pumps and relief valves are 100% factory tested
1)Hydraulic pump for dump truck 2) Flows of 37 and 46 GPM at 1800 RPM 3)Pressures to 2500 psi 4)Speeds to 2400 rpm 5)Choice of mountings 6)Air remote operators available 7)Relief valve protects pump & cylinder 8)All pumps and relief valves are 100% factory tested
(KPseries) Lifting hydraulic gear pump is a kind of widely used high press hydraulic element with the reasonable structure, reliable working performance, and easily maintenance etc. Our production is mainly adopted in the hydraulic of dump truck made in Japan.
1)Hydraulic pump for dump truck 2)23 & 34 gpm @ 1800 rpm 3)Pressures to 2500 psi 4)Speeds to 2400 rpm 5)Choice of mountings 6)Air remote operators available 7)Relief valve protects pump & cylinder 8)All pumps and relief valves are 100% factory tested
Maxfully offers Single acting reciprocating triplex piston mud pump; High pressure plunger pump for well cementing, acid/ steam fracturing, oil and water transportation; Skid mounted and truck mounted pumping units and pump parts. API certified. For applications whereas less horsepower is required, NB series completes the full range of slush pumps. Ranging from (40HP) to 1000 HP, it is of the same robust, durable and compact build as the F-series. Flexibility is also designed into this series with double-input shaft extensions to be driven from either side. 3NB series is of single acting reciprocating triplex design.
Tp series high pressure pump Maxfully offers single acting reciprocating triplex piston mud pump; high pressure plunger pump for well cementing, acid/ steam fracturing, oil and water transportation; skid mounted and truck mounted pumping units and pump parts. Api certified. The tp series of single acting triplex high pressure pump is rated for as high as 800hp and 70mpa in the oilfield servicing applications such as well flushing, well cementing and well fracturing. It is also widely used in pressure testing and wellhead pressure relief. The field proven design is compact, durable and efficient. It can be skid mount, truck mount; chain-driven or gear-driven as required. Since compatible with industrial standards, it matches with arison by520, ht750d, ht5961 and ht6061 transmission cases. To optimize its performance and service life, it is preferable to work at a maximum of 70-80% of it full power and below 270 strokes/min.
3GP and 5GP Series Steam Injection Pumps are widely used in secondary recovery. It increases the flow into wellbore by adding pressure to the reserve and reducing the viscosity of oil at the same time. Steam injection is also applied to primary recovery to optimize efficiency nowadays. This series are one of the first pumps that Maxfully developed for EOR. Input and output sides are interchangeable to allow maximum flexibility. Field proven design guarantees efficiency and reliability.
