Pump type MA is the standard heavy duty slurry pump which designed for the continuous pumping of highly abrasive, high density slurries with minmal maintenance requirements. It maintains high eï¬?ciencies over the wear life of its components. This type of pump typically used in process plant transfers, wet waste processes, recycling-washing plant, sand plant duties, heavy minerals processing, mineral recovery and chemical process plant. Pump range: Discharge Size: 1" to 18" Capacity: 4 to 5400 m³/h Heads: 5 to 75 m Typical application: - Mill discharge - Coarse sand - Tailings - Mineral concentration - Heavy media - Coal washing - FGD - Process chemical - Bottom / fly ash - Metal smelting Product features; - Elastomer or high chrome alloy liners provide corrosion & abrasion resistance, plus the interchangeability to reduce the maintenance cost and maximize wear life - Large diameter, high eï¬?ciency impellers designed to oï¬?er maximum wear life and low operating cost, wide options of impeller for speciï¬?c applications - Gland, expeller or mechanical seals are available to suite diï¬?erent working conditions - The bearing can be grease or oil lubricated which oï¬?er ease of maintenance and reduced downtime - The pump can be installed in multi-stage high pressure operation - Large internal passage designed to reduce internal velocities, maximize wear life and lower operating cost Contact us for more information: Amanda Chen +86 19921054564
Centrifugal pump FCL
1)Hydraulic pump for dump truck 2) Flows of 37 and 46 GPM at 1800 RPM 3)Pressures to 2500 psi 4)Speeds to 2400 rpm 5)Choice of mountings 6)Air remote operators available 7)Relief valve protects pump & cylinder 8)All pumps and relief valves are 100% factory tested
1)Hydraulic pump for dump truck 2) Flows of 37 and 46 GPM at 1800 RPM 3)Pressures to 2500 psi 4)Speeds to 2400 rpm 5)Choice of mountings 6)Air remote operators available 7)Relief valve protects pump & cylinder 8)All pumps and relief valves are 100% factory tested
1)Hydraulic pump for dump truck 2) Flows of 37 and 46 GPM at 1800 RPM 3)Pressures to 2500 psi 4)Speeds to 2400 rpm 5)Choice of mountings 6)Air remote operators available 7)Relief valve protects pump & cylinder 8)All pumps and relief valves are 100% factory tested
(KPseries) Lifting hydraulic gear pump is a kind of widely used high press hydraulic element with the reasonable structure, reliable working performance, and easily maintenance etc. Our production is mainly adopted in the hydraulic of dump truck made in Japan.
1)Hydraulic pump for dump truck 2)23 & 34 gpm @ 1800 rpm 3)Pressures to 2500 psi 4)Speeds to 2400 rpm 5)Choice of mountings 6)Air remote operators available 7)Relief valve protects pump & cylinder 8)All pumps and relief valves are 100% factory tested
Cow split leather work glove Cow split leather Grade: ab/bc.
Maxfully offers Single acting reciprocating triplex piston mud pump; High pressure plunger pump for well cementing, acid/ steam fracturing, oil and water transportation; Skid mounted and truck mounted pumping units and pump parts. API certified. For applications whereas less horsepower is required, NB series completes the full range of slush pumps. Ranging from (40HP) to 1000 HP, it is of the same robust, durable and compact build as the F-series. Flexibility is also designed into this series with double-input shaft extensions to be driven from either side. 3NB series is of single acting reciprocating triplex design.
Tp series high pressure pump Maxfully offers single acting reciprocating triplex piston mud pump; high pressure plunger pump for well cementing, acid/ steam fracturing, oil and water transportation; skid mounted and truck mounted pumping units and pump parts. Api certified. The tp series of single acting triplex high pressure pump is rated for as high as 800hp and 70mpa in the oilfield servicing applications such as well flushing, well cementing and well fracturing. It is also widely used in pressure testing and wellhead pressure relief. The field proven design is compact, durable and efficient. It can be skid mount, truck mount; chain-driven or gear-driven as required. Since compatible with industrial standards, it matches with arison by520, ht750d, ht5961 and ht6061 transmission cases. To optimize its performance and service life, it is preferable to work at a maximum of 70-80% of it full power and below 270 strokes/min.
3GP and 5GP Series Steam Injection Pumps are widely used in secondary recovery. It increases the flow into wellbore by adding pressure to the reserve and reducing the viscosity of oil at the same time. Steam injection is also applied to primary recovery to optimize efficiency nowadays. This series are one of the first pumps that Maxfully developed for EOR. Input and output sides are interchangeable to allow maximum flexibility. Field proven design guarantees efficiency and reliability.
Pig split leather palm, 4 finger tips AB Grade; BC Grade
Welders glove Colours: blue/red/grey Fully lined and welted Length: 14"; 16"
Work gloves
Cng cylinder With the standard of iso11439 in 20l, 28l, 35l, 57l, 77l, 113l, 101l, 120l and 130l in the material of 34crmo4
Zinc coated steel of gi, gl color coated steel of ppgi, ppgl, iron steel sheet, metallurgy materials, refractory materials.
Photovoltaic panels, industrial and commercial energy storage cabinets, charging piles.
Conveyor Belts.
Stone crusher, jaw crusher, mobile crusher, grinding mill, sand making machine, sand washing machine.
Pump, power tools, garden tools and test instrument.
