we also dealing with pipe and fitting, cable wirless.
PP Blow moulding Grade Item Value Unit MFR 3.0 g/10min Tensile strength at yield 34.9 MPa Tensile strength at break 23.4 MPa Isotactic exponent 96.8 % Ash 0.03 % Nominal tensile fracture strain 504 %. In 25kg polyethylene film bag with outer polypropylene woven bag. Can be palletized. 16.5ton/20'container.
Standards: Generally BS6500 VDE0250 Conductor: Class 5 annealed copper conductors to BS6360 / VDE0295 Insulation: PVC Bedding: PVC Braiding: Tinned Copper Wire Braid (TCWB) Sheath: PVC (Type TM2 to BS7655) Voltage Rating: 300/500V Temperature rating: Flexing -15ípC to +70ípC Static -35ípC to +70ípC
Screen: (overall screen) (indiviudual screen + overall screen) (overall screen + steel wire armour) (individual screen+ overall screen+steel wire armour) Sheath version: pvc/lsf/lsoh
Central loose tube cable contains one tube with 2 - 24 fibers, which is filled with water blocking gel. A water swelling tape is helically wrapped around the cable core. Either aramid yarn or fiber glass is wound around the tube to provide physical protection and tensile strength. The cable is jacketed with PE for water protection purpose. For direct burial, steel wire armour and corrugated steel tape armour are applied with an optional PE
Conductor material: solid plain annealed copper referred to bs6360 Insulation material: cellular high density polyethylene Laying-up: pairs; units Wrapping: polyester tape Filler: petrolatum jelly filled Screen: aluminium foil with overlapping Bedding: polyethylene
Applications: Long distance outside telephone, catv, data, communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial (with armoring). Construction: The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation) Minimum bending radius: Short term installation: 20 x overall diameter Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored) Twist (torsion length): 125 x overall diameter Working temperature: -40íµ ~ +70íµ (pe sheath) Storage temperature: -50íµ ~ +70íµ (pe sheath) Product highlights: All the fiber containing tubes are placed in concentric layers around the central member; through the control of The twist length, the fiber cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene, Are placed at the centre of the cables. Roll, box, drum
Aluminum Alloy dragon cable.It is made of alloy shell,cooper core and dragon woven.It has charge 2 in 1,bold conductor,high strength wire rope,and durable non knot functions. Suitable for
Flat design,not easy to knot,internal use of high purity oxygen free copper wire, strong conductivity,nickel plate connector,resistance to plug and play,two port uniqne non slip setting,more fit finger,and easier to plug speed charging
Application These cables are designed for transmission of analog and digital signals, and the interconnection of electrical equipment and instruments, particular for the process control industry. Conductors: Annealed solid copper(Class 1), stranded(Class 2), or flexible(Class 5) to BS 6360. Insulation: PE/XLPE Screen: (Overall Screen) (Individual Screen + Overall Screen) (Overall Screen + Steel Wire Armour) (Individual Screen+ Overall Screen+Steel Wire Armour) Sheath Version: PVC/LSF/LSOH Pair Identification: a) Collectively screened cables: Color coded in accordance with Color Code as per BS5308 standard. b) Individually screened pairs: One white core and one black core in each pair. Pairs identified by numbered screen isolation tape.
Cables.
Cables, power calbes, control cables , tel cables, belden cables.
Application 6181B is cord for use in machine tools and electrical appliances. Conductor Extra flexible copper conductor Insulation PE/XLPE insulation Core Single core and multi core conductor from 0.5-1000 mmsq Armouring: Armoured and unarmoured available Jacket PVC/LSOH/LSF.
Application: Power limited circuit, remote control, signaling, security systems, communications, intercom/P.A. systems, sound/audio, and nurse call. Conductor Material: Bare copper wire strands Insulation Material: PE/PVC Laying-up: Units Drain Wire: Solid bare copper Shield: Overall Al/Polyester foil shield Nylon Rip Cord: 150D Sheath Material: PVC/LSF/PE Sheath Color: As your request Shape: Circular in cross-section Voltage Rating: 300/500 voltage Temperature Rating: 75íµ Fire Performance Flame Propagation Test to IEC 60332 Part 1 and Part 3 Determination of the amount Halogen Acid Gas to IEC 60754 Part 1 Smoke Density Test to IEC 61034 Oxygen Index Test to BS 2863 or ISO 4589-2 Temperature Index Test to BS 2782 or ISO 4589-3 Fire Resistant Test to IEC 60331-24.
Cables.
Cables.
These cables are designed for transmission of anglog and digital signals, and the interconnection of electrical equipment and instruments, particular for the process control industry. Conductors: Annealed solid copper(Class 1), stranded(Class 2), or flexible(Class 5) to BS 6360. Insulation: PE/XLPE. Screen: (Overall Screen) (Indiviudual Screen + Overall Screen) (Overall Screen + Steel Wire Armour) (Individual Screen+ Overall Screen+Steel Wire Armour) Sheath Version: PVC/LSF/LSOH. Pair Ideatification: a) Collectively screened cables: Color coded in accordance with Color Code as per BS5308 standard. b) Individually screened pairs: One white core and one black core in each pair. Pairs identified by numbered screen isolation tape.
Conductor: Plain annealed Fire barrier: Mica Tape Insulation: XLPE Filler: Polypropylene yarn Binder Tape: Polypropylene sheath : LSOH compound No. of Core Conductor Nominal Thickness of Insulation Nominal Thickness of Sheath Approx. Overall Diameter Approx. Weight Size No/Dia. of Wire Approx. Dia. mm2 No/mm mm mm mm mm kg/km 2 1.5 7/0.53CR 1.59 0.7 0.9 9.0 115 2.5 7/.067CR 2.01 0.8 1.0 10.5 160 4.0 7/0.85CR 2.55 0.8 1.1 12.0 220 3 1.5 7/0.53CR 1.59 0.7 1.0 10.0 140 2.5 7/0.67CR 2.01 0.8 1.1 11.5 195 4.0 7/0.85CR 2.55 0.8 1.1 12.5 265 4 1.5 7/0.53CR 1.59 0.7 1.0 11.0 170 2.5 7/0.67CR 2.01 0.8 1.1 12.5 240 4.0 7/0.85CR 2.55 0.8 1.2 14.0 335 . Note: CR = Circular stranded conductor .
Cables.