Sbm vibrating feeder
SBM Vibrating Screen
Sbm jaw crusher Widely used in stone mining, metall-urgical industry, building material, highway, railway, and chemical industry.
"karam" horizontal boring machines are widely used for boring, drilling, milling & facing operations and are one of the reputed brands in indian machine tools industry. Table type horizontal boring machines as well as floor type horizontal boring machines are being manufactured by the firm. Machines come in different spindle sizes ranging from 65mm to 150mm.
Jk-40y cnc engraving machine The machine base is made of castings with good rigidity and stability. Precision linear rectangular guides are used. It is pre-tightened and with good rigidity and accuracy. Ball screws are grounded with the accuracy of high degree and pre-tightened. The interface is of international standard g codes and compatible with domestic or foreign software. It is easy to use and suitable mainly for stamp. Model:jk-40y Table size: 480*380mm Working stroke of x, y, z: 400*300*80mm Positioning accuracy of x, y, z: 0.015/300mm Repositioning accuracy of x, y, z: 0.015mm Evenness of worktable: 0.025/300mm Verticality of x, y: 0.025/300mm Spatial height in z direction: 160mm Spindle power: 800w Spindle speed: 5000-24000rpm Driving system: stepped Working voltage: single phase 220v 50hz Weight of machine tool: 250kg Dimension: 780*620*1400mm Wooden package. 800x800x1600mm
1.Make features of big taper, considerable thickness, high efficiency, high precision and new structure etc, lead this industry; 2.There are computer, machine electric and pulse power supply all in the controller; 3.Main computer has two kinds of typesí¬single board computer and microcomputer; 4.Double CPUs structure in microcomputer, program and control at the same time; 5.Good rigidity, running placidly, strong function, convenient and reliable operation; 6.The whole closed machine bed, working table with T shaped groove, pane fixture; 7. Suitable to process conductive metal moulds, complex metal parts and templates with high precision, high toughness and difficult processing; 8.Can cut plane, bevel, top and bottom different shaped surface, greatly expand the processing range; 9.According to usersí» request, add half closed-loop, transducer control system. Package dimensions(Lí-Wí-H) mm 1800í-1400í-1800
The machine base is made of castings with good rigidity and stability. Precision linear rectangular guides are used. It is pre-tightened and with good rigidity and accuracy. Ball screws are grounded with the accuracy of high degree and pre-tightened. The interface is of international standard G codes and compatible with domestic or foreign software. It is easy to use and suitable mainly for high frequency moulding, drop moulding and mini moulding industry and their relevant industries. Model:JK-50M Table Size: 630*530mm Working Stroke of X, Y, Z: 500*400*110mm Positioning Accuracy of X, Y, Z: í+0.005/300mm Repositioning Accuracy of X, Y,Z: í+0.01mm Evenness of Worktable: í+0.025/300mm Verticality of X, Y: 0.025/300mm Spatial Height in Z Direction: 300mm Spindle Power: 2.2kw Spindle Speed: 5000-24000rpm Driving System: Servo Working Voltage: Single Phase 220V Three Phase 380V/50Hz í+10% (optional) Weight of Machine Tool: 1000kg Dimension: 1150*1080*1500mm 1300X1300X1800 mm
JK-40M Table Size: 480*380mm Working Stroke of X, Y, Z: 400*300*90mm Positioning Accuracy of X, Y, Z: í+0.01/300mm Repositioning Accuracy of X, Y,Z: í+0.01mm Evenness of Worktable: í+0.025/300mm Verticality of X, Y: 0.025/300mm Spatial Height in Z Direction: 200mm Spindle Power: 800w Spindle Speed: 5000-24000rpm Driving System: Servo Working Voltage: Single Phase 220V Weight of Machine Tool: 700kg Dimension: 800*780*1450mm WOODEN PACKAGE 1200X1200X1600 mm
Cnc engraving machine-jk-40j-d JK-40M Table Size: 480*380mm Working Stroke of X, Y, Z: 400*300*90mm Positioning Accuracy of X, Y, Z: í+0.01/300mm Repositioning Accuracy of X, Y,Z: í+0.01mm Evenness of Worktable: í+0.025/300mm Verticality of X, Y: 0.025/300mm Spatial Height in Z Direction: 200mm Spindle Power: 200w Spindle Speed: 1000-2500rpm Driving System: Stepped Working Voltage: Single Phase 220V Weight of Machine Tool: 700kg Dimension: 800*780*1450mm wooden package. 1000x1000x1600MM
Mini milling machine Chiung yang has strived to produce powerful milling machines for over 20 years and won praises due to the stable quality and rapidly product delivery in taiwan . Our milling machineis applied to proces household hardware, such as bicycle parts, small accesories and so on. We have several models available for different working duties and customizing current products to fulfill customer special needs. Cy-mm-1/3 Suitable for procesing small hardware item . Type cy-mm-1/3 Machine height 850mm Working surface of table 415 x110mm Max.Transversal travel 120mm Max. Longitudinal travel 160mm Max. Vertical travel 150mm Max. Cutter outside diam 130á· Max. Cuttetr length 100mm Max. Cutter thicknes 2 Drive motor 1/2hp Mandrill Number of spindle speeds 550 340rpm Machine weight 110kg Measurement-0.1 500x600x900mm Measurement-0.1 500x600x900mm
Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely used in mining, metall-urgical industry, building material, highway, railway, and chemical industry. Working Principle of Jaw Crusher: The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher. Characteristics of Jaw Crusher: High ratio of crushing, homogeneous final grain size, simple structure, reliable working condition, easy maintenance, low operating cost. standard packing
Impact Crusher is mainly used to crush many kinds of large, medium, small materials whose side length is less than 500mm, and compression resistance should not be more than 350Mpa. The impact crusher is widely used in hydroelectricity, highway, artificial stone and sand, building material, etc. Working Principle of Impact Crusher: When the impact crusher works, the motor drives the rotor rotate of the impact crusher with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers effect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being recrushed. The materials from large to small all to be crushed at the impact chamber repeatedly. The process woní»t stop till the material are crushed to the required size and then discharged from outlet of the impact crusher. Characteristics of Impact Crusher: Special structure, connected without key, high chrome hammer, unique impact liner, deal with hard material, high efficiency and save energy, cubic shape of product, adjustable output size. standard packing
The ball mill is a key equipment to grind the crushed materials, and the ball mill is widely used in powder-making production line including cement, silicate, new-type building material, refractory material, fertilizer, ore dressing of ferrous metal and non-ferrous metal, glass ceramics, etc, and the ball mill can grind various ores and other materials with dry type and wet type. There are two kinds of ball mill, grate type and overfall type due to different ways of discharging material. Working Principle: The ball mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of steel balls in the chamber. The centrifugal force caused by rotation of barrel brings the steel balls to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished. Standard packing
CNC Cutting Machine Main technical specifications and devices of the machine 1. Overall dimension: please see fig. 4, fig. 5, fig. 6 and fig. 7. 2.Track length: 26000mm, the effective cutting length is 24000mm. 3.Track width: 5000mm, the effective cutting width is 4200mm. 4.Driving mode: double-side driving 5.Cutting speed: 50 ~ 6000mm/min. 6.Max. Rapid speed: 18000mm/min. 7.Main cutting device: 1 set of single flame torch, a set of automatic height control system and a set of automatic ignition system. 8.1 set zinc powder marking torch. 9.Adjusting range for up-and-down of torch: 200mm 10. Gas for flame cutting: oxygen-acetylene or oxygen-propane or lpg Flame cutting thickness: 6 ~ 120mm 12. Strip cutting device: 4 strip-cutting torches are equipped on the back of the beam.
Cncpipeprofilecuttingmachine I.Maintechnicalspecifications 1.Outerdiameterofpipetobecut:75~1010mm 2.Max.Wallthicknesstobecut:50mm(oxy/ace), 25mm(plasma) 3.Borediameterforsteelpipegoingthroughspindle:200 4.Steelpipecuttinglength:12000mm 5.Numbersofcontrolaxis:5 6.Themax.Travel:10000mminxdirection 600mminydirection 400mminzdirection 7.Cuttingspeed:10~2000mm/min. 8.Angleofgrove:n60 9.Themax.Rotaryangle: W:limitlessrotation(piperotating) B:70(torchswayedangle) 10.Plasmacuttingfunctioncanbeequipped.
-TOS SKJ 12 Working voltage of motor 380Vx3phx50Hz Main power consumption 70kW 3 jaw, all bolts screw Fastening plate diam 1250mm max diam of workpiece turn 1400mm max height of workpiece 1150mm max weight of workpiece 6000kg There is a possibility to change fastening plate turns in 3 stages to the right and to the left Weight of the machine-13500 kg
Rotary Shearing Machine to cut Bars. Billet Shearing Machine with a maximum capacity to cut 200 mm Billet/Ingot. Cold Shearing machine to cut Bars and various sections like Angle,Girder,Channels,T iron etc.
Angle Straightening Machine, Flat Straightening Machine, Section Starightening Machine, Channel Starightening Machine
High speed Nominal pressure:450kN Nominal pressure stroke:1.6mm stroke length:10mm/20mm/30mm No .of stroke per minute:150-550/150-500/150-450 Max.height space :265mm/260mm/255mm die hight adjustment:50mm throat depth:235mm bolster surface:F.B*L.R 450mm*740mm slide surface :F.B*L.R 290mm*340mm stemhole:50mm*75mm distance between uprights:300mm thickness of bolster:110mm air pressure:0.5MPa weight:4000kg F.B*L.R*height:1620*1353*2471
Nominal pressure:4000kn Nominal pressure stroke:13mm Stroke length:400mm No .Of stroke per minute:15 Max.Height space :900mm Die hight adjustment:400mm Thickness of bolster:180 Bolster surface:f.B*l.R 2800mm*1600mm Weight:91500kg F.B*l.R:3850*5700
