Ball mill
Rotary kiln
Adopt closed high efficiency heat room , have noise circulation air blower , transfer to arm frequency conversion suit well the speed, Having no noise pollution-frely, the working environment is good, production efficiency is high, Products wall thick and even, can produce various kinds of specification plastic containers of different form, Good at and produce dysmorphism empty products of specially appearsing particularly. Shaping waving machine.
Easy ironing with strong vacuuming and blowing. Heat control system with termostat on ironing surface. It must be combined with steam boiler Voltage&frequency220/380 v& 50hz Power of suction0, 37 kw Power of blowing0, 37 kw Table heating element1, 5 kw
1. High efficiency : braking torque ranges from 900newton metres to 2200n.M(for example 900n.M, 1200n.M, 1500n.M, 1700n.M, 1900n.M, 2200n.M) adaptable for variety of wehicles, bus, van, and automobiles. 2. Low power consumption. A. Working voltage: 24v B. Working current: 70amper~ 120amper 3.Application: fit the weight ranges from 6 tons~26 tons for bus, vehicles. 4. Save cost: lower the possibility of the wear and tear of braking system. 5. Long life: made of imported original japan materials, which slight the heat deforming of the two rotor turntables, so the moment declining along with heat declining is light, which can work a long time. 6. Compact structure and flexible installation in gearbox or rear axle. 7. Digital controlling system ensures driving safety and stability. It will be much safer to drive. Various size & weight& dimension is available
(High Pressure Suspension Mill)High Pressure Suspension Mill are used to grind barite, limestone, kaolin, and ceramics and slag, whose Moh's hardness is below 9.3 scales, non-inflammable and non-explosive material. Features: 1) Our patent product 2) Product size is adjustable in the range of 80 - 425 meshes 3) Better design which reduces cost Models available: 1) YGM75 High Pressure Suspension Grinder Mill a) Number of roller: 3 b) Diameter of roller: 260mm c) Height of roller: 150mm d) Inside diameter of ring: 780mm e) Height of ring: 150mm f) Max. feeding size: 15mm g) Fineness of product: 0.613 - 0.033mm h) Capacity: 0.28 - 3.0MT http://www.grinderpro.com/product.html 2) YGM85 High Pressure Suspension Grinder Mill a) Number of roller: 3 b) Diameter of roller: 270mm c) Height of roller: 140mm d) Inside diameter of ring: 830mm e) Height of ring: 140mm f) Max. feeding size: 20mm g) Fineness of product: 0.613 - 0.033mm h) Capacity: 0.35 - 3.4MT i) Dimensions: 5,300 x 4,100 x 5,200mm 3) YGM95 High Pressure Suspension Grinder Mill a) Number of roller: 4 b) Diameter of roller: 310mm c) Height of roller: 170mm d) Inside diameter of ring: 950mm e) Height of ring: 170mm f) Max. feeding size: 25mm g) Fineness of product: 0.613 - 0.033mm h) Capacity: 1.5-5MT i) Dimension: 7,100 x 5,900 x 7,900mm 4) YGM130 High Pressure Suspension Grinder Mill a) Number of roller: 5 b) Diameter of roller: 410mm c) Height of roller: 210mm d) Inside diameter of ring: 1280mm e) Height of ring: 210mm f) Max. Feeding size: 30mm g) Dimensions: 9,200 x 7,250 x 9,700mm h) Capacity: 5-8MT
Model 3R2115 Max Feeding Size (mm) 15 The final products size (mesh) 80-325(finest 500) Capacity (T/H) 0.2-1.5 Rotational Speed of the Central Axis 160Rev The inner Diameter of Roller (mm) ¿¬630 The Diameter of Roller (mm) í-210 Height of Roller and Ring (mm) 150 Motor of Mainframe Y200L-8-15KW Motor of Air Blower Y132M-4-11KW Motor of Separator Y112M-6-2.2KW Dimension (L*W*H) 4.6*3.4*5.9
High-pressure Micro-powder Grinding Machine(fine powder mill) From VIPEAK can be used in grinding the regular material, such as kaoline, limestone, calcite, talcum, barite, gesso, ferric oxide red, ferric oxide green, aluminum hydroxide, pigment, bentonite, argil, coal and active carbon that Moh's hardness is below 4, and humidity is 8%, non-flammable explosive mineralsí» processing. The product size is between 500 meshes (25 micron) and 1250mesh, the finest to be 2500 meshes (5 micron) Models available: 1) YGM7826 High Pressure Micropowder Grinder a) Number of roller: 3 b) Diameter of roller: 260mm c) Height of roller: 150mm d) Inside diameter of ring: 780mm e) Height of ring: 150mm f) Feeding size:
Airgreat Nitrogen Generator with the PSA sophisticated machinery and technological innovation, providing low-cost and high-quality products of nitrogen gas. Nitrogen gas is the main component of air.Because it's difficult to react with other chemical substances, nitrogen gas is usually used as the protection gas in production, and is widely used in electronics, chemicals, coals, foodstuffs,pharmacies,magnetic materials, cables, metal processing, ports, transports, tires, thermoelectric, metallurgy, glass and other industries. 1130*750*2120mm 1000kg
SMT Nitrogen Generator with high purity of N2 could be regulated between 99.99% to 99.999% to meet needs of SMT production.Energy conservation, the power consumption of nitrogen per cubic meter is about 0.42 degree. Low dew point of product=-45'C to ensure the quality of welding. Standard models, simple compatibility.Inthe reflow solding of SMT, nitrogen gas is charged into reflow furnace. The following advantages of soldering are listed in the nitrogen atmosphere:The quality of soldering is enhanced with the prevention of surface oxidation. The flux is guaranteed to the correct activation. The remnants of flux is lower. The surface of soldering is more artistic. 1130*750*2120MM 1000KG
Vipeak High Pressure Midum Speed Grinder is suitable for grinding the barite, limestone, kaollnite, ceram and slags, etc. which below scale 9.3 of Moth and below 6% shadness and 280-odd sorts of non-inflammable and non-explosive stuff in the trades of mining, metallurgy, chemical engineering and building material for high fine powder generating and processing . The Product size is adjustable in the range of 80-425 mesh. It is possible to produce 30-80 mesh coarse powder through special device in the machine. High Pressure Midum Speed Grinder Features: 1. Having higher capacity of 20-30% relatively to Raymond mill, and Higher grinding force of rollers to stuffs because of high pressure springs.( notes for 5R4121: compared to 5R4119 raymond mill, at the same motor powder, capacity is improved to 10%, and Higher grinding force of rollers to stuffs because of high pressure springs.) 2.It can process the mineral stuffs of Moh's hardness below 9.3 grade. 3.The final products have a wide range, max. powders are up to 0.95mm(20mesh), mini ones are 0.038mm(400mesh). little pollution and dust collector efficiency is to national limitation. High Pressure Midum Speed Grinder Working process: large stuffs are delivered to bunker by elevator after crushed, then to chamber by electric feeder. In mainframe, shovels scoop up stuffs into the parts between rollers and ring, the processed powders are blowed up to analytical engine with wind entering chamber by blower, part of powders which can not be up the demand fineness will fall back to be grinded, left(that is final product) with airflow enter concentrator and divided with air then discharged from discharge vavle. Air returns to blower and circles, flowing in minus state.
On basis of many times experiments and improvement, introducing the latest mechanical techniques of Sweden , High Pressure Micropowder Grinding Mill, the latest industrial micro-powder grinding mill, is a new type grinding machine for producing micro-powder. Note: When users grind the material that hardness degree is between 4 and 6, the service life of the wearing parts will be shortened. Vipeak High Pressure Micro-powder Grinding Mill can grind calcite, limestone, calcite, dolomite, kaolin, bentonite, talc, illite, pyrophillite, barite, meerschaum, fluorite, potash ore and other more than 200 kinds of materials that Moh's hardness is below 6, non-explosive, non-flammable minerals. Features of High Pressure Micropowder Grinding Mill: 1 Energy-saving 2 Wide Application Range 3 Good craftmanship 4 Powder Fineness:
Sand Making & Washing Production Line: Henan Vipeak Heavy Industry Co., Ltd. manufactures various equipments for whole set of sand-making production line, and provides superior technical support for customers. The whole sand-making production line consists of vibrating feeder, jaw crusher, PCL vertical shaft impact crusher (sand-making machine), vibrating screen, sand-washing machine, belt conveyor, electric control system, etc. We design different production lines ranging 50 t/h to 500 t/h. We have been researching the sand-making machine for years, and we have made it part of the production line. The whole set of sand-making production line designed by our company is suitable to crush the hard limestone, granite, basalt, gravel, slag, etc and artificially sand making for hydroelectric power, building material, high way, city construction, etc. Different models of equipments are combined to meet different customersí» different demands according to different craft requirements. Process of the Production Line: The raw material is transferred to jaw crusher for primary crushing by vibrating feeder, then the crushed materials are transferred to sand-making machine through belt conveyor for secondary crushing. The crushed materials will be transferred to the vibrating screen. The materials with suitable size will be transferred to sand washing machine, after being washed, then clean final products will be discharged. The others with unsuitable size will be screened from vibrating screen, then will be transferred to the sand-making machine, this forms a closed circuit manifold cycles.
Raymond mill(vipeak) With qualified products and good service, zhengzhou vipeak heavy industry machinery co., ltd supplies series raymond roller mill(raymond mill), which is suitable for grinding barite, calcite, potash feldspar, talcum, marble, limestone, ceramics, etc. Whose mohs' hardness is below 7 scales and humidity does not exceed 6% and other non-inflammable and non-explosive material. Features: Three-dimensional structure Land-saving The screen-passing rate can reach to 99% The transmission is steady and reliable; The transmission device of mainframe adopts airtight gear case and zonal wheel. Centralized control for the electric system, convenient to operate. Model 3r2115 Max feeding size (mm)15 The final products size (mesh)80-325(finest 500) Capacity (t/h)0.2-1.5 Rotational speed of the central axis160rev The inner diameter of roller (mm)¿¬630 The diameter of roller (mm)íd210 Height of roller and ring (mm)150 Motor of mainframey200l-8-15kw Motor of air blowery132m-4-11kw Motor of separatory112m-6-2.2kw Dimension (l*w*h)4.6*3.4*5.9 3r2115 Max feeding size(mm):15 The final products size(mesh):80-325(finest500) Raymond roller mill 3r2715 Number of roller: 3 Diameter of roller: 270mm Height of roller: 140mm Inside diameter of ring: 830mm Height of ring: 140mm Max. Feeding size: 15-20mm Fineness of product: 0.044-0.165mm Capacity: 0.9-3.8 t
Dry mix mortar plant With a productivity of 15 to 80 tons per hour; the sand is weighed automatically after drying and sorting, cement and fly-ash is feed in bulk, automatic weighing, additives automatically weighed as well. This type is the generally used fully-automated production of high-grade products in the world at present; apply to customers with a large investment capacity.
Precision grinder
Vertical milling machine
RDSO approved plant
The system is capable of producing bright and long oxygen-free copper rod, copper tube, flat copper bar and other special shaped copper material from cathode copper, and the copper rod diameters are from 8mm to 30mm. Total annual capacity is from 2000 MT to 10000MT. Technical parameter of final product: Density: 8.9 g/cm3 Tensile strength: 170N/mm2 Elongation at break: >35% Conductivity of soft wire: í¦100% IACS Oxygen content: í_10ppm
Universal high performance press are widely used in the field of aeronautics, automobiles, agricultural machines, electric machines, apparatuses and meters, medical equipments, electrical home appliances and hardware. Welded frame with quality steel which means good rigidity Square figure long guide with six friction faces makes abrasion on resistant and punching precision. Combined pneumatic clutch and brake is made of friction material, which means long service life. Closed bevel gear, dipped in lube, which drives stably with low noise. Slide with counter balancer, which will eliminate the clearance and improve the stability and precision. Jh series automatically lubricate at a fixed time and location with fixed amount. Plc electric control system is safe and reliable. Air cushion, photo guard, auto feeder, speed die changing are optional. Fb*lr*height:1940*1370*3290 Weight:10000kg
