"karam" horizontal boring machines are widely used for boring, drilling, milling & facing operations and are one of the reputed brands in indian machine tools industry. Table type horizontal boring machines as well as floor type horizontal boring machines are being manufactured by the firm.
Machines come in different spindle sizes ranging from 65mm to 150mm.
The machine base is made of castings with good rigidity and stability. Precision linear rectangular guides are used. It is pre-tightened and with good rigidity and accuracy. Ball screws are grounded with the accuracy of high degree and pre-tightened. The interface is of international standard g codes and compatible with domestic or foreign software. It is easy to use and suitable mainly for stamp.
Model:jk-40y
Table size: 480*380mm
Working stroke of x, y, z: 400*300*80mm
Positioning accuracy of x, y, z: 0.015/300mm
Repositioning accuracy of x, y, z: 0.015mm
Evenness of worktable: 0.025/300mm
Verticality of x, y: 0.025/300mm
Spatial height in z direction: 160mm
Spindle power: 800w
Spindle speed: 5000-24000rpm
Driving system: stepped
Working voltage: single phase 220v 50hz
Weight of machine tool: 250kg
Dimension: 780*620*1400mm
1.Make features of big taper, considerable thickness, high efficiency, high precision and new structure etc, lead this industry;
2.There are computer, machine electric and pulse power supply all in the controller;
3.Main computer has two kinds of typesí¬single board computer and microcomputer;
4.Double CPUs structure in microcomputer, program and control at the same time;
5.Good rigidity, running placidly, strong function, convenient and reliable operation;
6.The whole closed machine bed, working table with T shaped groove, pane fixture;
7. Suitable to process conductive metal moulds, complex metal parts and templates with high precision, high toughness and difficult processing;
8.Can cut plane, bevel, top and bottom different shaped surface, greatly expand the processing range;
9.According to usersí» request, add half closed-loop, transducer control system.
Package dimensions(Lí-Wí-H) mm 1800í-1400í-1800
3501 Heavy Machinery Suppliers
Short on time? Let Heavy Machinery sellers contact you.
The machine base is made of castings with good rigidity and stability. Precision linear rectangular guides are used. It is pre-tightened and with good rigidity and accuracy. Ball screws are grounded with the accuracy of high degree and pre-tightened. The interface is of international standard G codes and compatible with domestic or foreign software. It is easy to use and suitable mainly for high frequency moulding, drop moulding and mini moulding industry and their relevant industries.
Model:JK-50M
Table Size: 630*530mm
Working Stroke of X, Y, Z: 500*400*110mm
Positioning Accuracy of X, Y, Z: í+0.005/300mm
Repositioning Accuracy of X, Y,Z: í+0.01mm
Evenness of Worktable: í+0.025/300mm
Verticality of X, Y: 0.025/300mm
Spatial Height in Z Direction: 300mm
Spindle Power: 2.2kw
Spindle Speed: 5000-24000rpm
Driving System: Servo
Working Voltage: Single Phase 220V
Three Phase 380V/50Hz í+10% (optional)
Weight of Machine Tool: 1000kg
Dimension: 1150*1080*1500mm
JK-40M
Table Size: 480*380mm
Working Stroke of X, Y, Z: 400*300*90mm
Positioning Accuracy of X, Y, Z: í+0.01/300mm
Repositioning Accuracy of X, Y,Z: í+0.01mm
Evenness of Worktable: í+0.025/300mm
Verticality of X, Y: 0.025/300mm
Spatial Height in Z Direction: 200mm
Spindle Power: 800w
Spindle Speed: 5000-24000rpm
Driving System: Servo
Working Voltage: Single Phase 220V
Weight of Machine Tool: 700kg
Dimension: 800*780*1450mm
Cnc engraving machine-jk-40j-d
JK-40M
Table Size: 480*380mm
Working Stroke of X, Y, Z: 400*300*90mm
Positioning Accuracy of X, Y, Z: í+0.01/300mm
Repositioning Accuracy of X, Y,Z: í+0.01mm
Evenness of Worktable: í+0.025/300mm
Verticality of X, Y: 0.025/300mm
Spatial Height in Z Direction: 200mm
Spindle Power: 200w
Spindle Speed: 1000-2500rpm
Driving System: Stepped
Working Voltage: Single Phase 220V
Weight of Machine Tool: 700kg
Dimension: 800*780*1450mm
Chiung yang has strived to produce powerful milling machines for over 20 years and won praises due to the stable quality and rapidly product delivery in taiwan . Our milling machineis applied to proces household hardware, such as bicycle parts, small accesories and so on.
We have several models available for different working duties and customizing current products to fulfill customer special needs.
Cy-mm-1/3
Suitable for procesing small hardware item .
Type cy-mm-1/3
Machine height 850mm
Working surface of table 415 x110mm
Max.Transversal travel 120mm
Max. Longitudinal travel 160mm
Max. Vertical travel 150mm
Max. Cutter outside diam 130á·
Max. Cuttetr length 100mm
Max. Cutter thicknes 2
Drive motor 1/2hp
Mandrill
Number of spindle speeds 550 340rpm
Machine weight 110kg
Measurement-0.1 500x600x900mm
Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely used in mining, metall-urgical industry, building material, highway, railway, and chemical industry.
Working Principle of Jaw Crusher:
The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.
Characteristics of Jaw Crusher:
High ratio of crushing, homogeneous final grain size, simple structure, reliable working condition, easy maintenance, low operating cost.
Impact Crusher is mainly used to crush many kinds of large, medium, small materials whose side length is less than 500mm, and compression resistance should not be more than 350Mpa. The impact crusher is widely used in hydroelectricity, highway, artificial stone and sand, building material, etc.
Working Principle of Impact Crusher:
When the impact crusher works, the motor drives the rotor rotate of the impact crusher with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers effect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being recrushed. The materials from large to small all to be crushed at the impact chamber repeatedly. The process woní»t stop till the material are crushed to the required size and then discharged from outlet of the impact crusher.
Characteristics of Impact Crusher:
Special structure, connected without key, high chrome hammer, unique impact liner, deal with hard material, high efficiency and save energy, cubic shape of product, adjustable output size.
The ball mill is a key equipment to grind the crushed materials, and the ball mill is widely used in powder-making production line including cement, silicate, new-type building material, refractory material, fertilizer, ore dressing of ferrous metal and non-ferrous metal, glass ceramics, etc, and the ball mill can grind various ores and other materials with dry type and wet type. There are two kinds of ball mill, grate type and overfall type due to different ways of discharging material.
Working Principle:
The ball mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of steel balls in the chamber. The centrifugal force caused by rotation of barrel brings the steel balls to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished.
Main technical specifications and devices of the machine
1. Overall dimension: please see fig. 4, fig. 5, fig. 6 and fig. 7.
2.Track length: 26000mm, the effective cutting length is 24000mm.
3.Track width: 5000mm, the effective cutting width is 4200mm.
4.Driving mode: double-side driving
5.Cutting speed: 50 ~ 6000mm/min.
6.Max. Rapid speed: 18000mm/min.
7.Main cutting device: 1 set of single flame torch, a set of automatic height control system and a set of automatic ignition system.
8.1 set zinc powder marking torch.
9.Adjusting range for up-and-down of torch: 200mm
10. Gas for flame cutting: oxygen-acetylene or oxygen-propane or lpg
Flame cutting thickness: 6 ~ 120mm
12. Strip cutting device: 4 strip-cutting torches are equipped on the back of the beam.
Working voltage of motor 380Vx3phx50Hz
Main power consumption 70kW
3 jaw, all bolts screw
Fastening plate
diam 1250mm
max diam of workpiece turn 1400mm
max height of workpiece 1150mm
max weight of workpiece 6000kg
There is a possibility to change fastening plate turns in 3 stages to the right and to the left
Rotary Shearing Machine to cut Bars.
Billet Shearing Machine with a maximum capacity to cut 200 mm Billet/Ingot.
Cold Shearing machine to cut Bars and various sections like Angle,Girder,Channels,T iron etc.
Nominal pressure:4000kn
Nominal pressure stroke:13mm
Stroke length:400mm
No .Of stroke per minute:15
Max.Height space :900mm
Die hight adjustment:400mm
Thickness of bolster:180
Bolster surface:f.B*l.R 2800mm*1600mm
