Polar-chiller is one of the earliest manufacturers in china who make equipments for sauna sector, such as water chiller, heat pump unit, cold & hot water unit, (ice house) condensing unit, constant temperature dehumidifier etc., remain with the industrial chiller series and industrial dehumidifier series. Since 1980s, polar has supplied huge quantity of cool-hot, dehumidifying-constant temperature equipments for sauna sports sector and entertainment sector. Sauna ice room condensing unit Â?¢ Suitable for sauna ice house or small cold storage room where refrigeration is needed. Â?¢ The unit have set up the control and protector before leaving the factoryã?? Â?¢ Powerï¼?3hp-10hp (2.2kw-7.5kw) Â?¢ Refrigerated capacityï¼?60200kcal/h - 20200 kcal/h (7kw â?? 23.5 kw) Â?¢ Can supply more or less model by requiring.
Polar-chiller is one of the earliest manufacturers in china who make equipments for sauna sector, such as water chiller, heat pump unit, cold & hot water unit, (ice house) condensing unit, constant temperature dehumidifier etc., remain with the industrial chiller series and industrial dehumidifier series. Since 1980s, polar has supplied huge quantity of cool-hot, dehumidifying-constant temperature equipments for sauna sports sector and entertainment sector. Cooling & heating water unit Â?¢ Suitable for sauna pool, swimming pool, massage pool and hydrotherapy pool where it needs cooling and heating at the same time. Â?¢ Auxiliary heating device can be added based on special requirementsã?? Â?¢ Hot water system is safe and reliable it has no any electric componentã?? Â?¢ While supplying cool air, it offers free hot water tooã?? Â?¢ Thereâ??s air-cooled type and water-cooled type. Â?¢ Control tempï¼?coldï¼?3â??-30â??; hotï¼?15â??-45â??ã?? Â?¢ Refrigerantï¼?r22/r407c/r134a/r410a Â?¢ Powerï¼?2hp-30hp (0.37kw-22.5kw) Â?¢ Refrigerated capacityï¼?4900 - 71200 kcal/h (5.6kw â??82.8 kw) Â?¢ Heating capacityï¼?5200 - 75000 kcal/h (6kw â??87 kw) Â?¢ Around tempï¼?5â??-40â?? Â?¢ Can supply more or less or especially unit by demand.
Polar-Chiller is one of the earliest manufacturers in China who make equipments for Sauna sector, such as Water Chiller, heat pump unit, cold & hot water unit, (ice house) condensing unit, constant temperature dehumidifier etc., remain with the industrial chiller series and industrial dehumidifier series. Since 1980s, Polar has supplied huge quantity of cool-hot, dehumidifying-constant temperature equipments for Sauna Sports Sector and Entertainment Sector. Heat Pump Hot Water Unit â?¢ Suitable for Sauna Massage Poolâ??s, Swimming Poolâ??sâ??, Massage Bathtubâ??s and Hydrotherapy Poolâ??s heating, as well as for industrial and civil purpose or any other place where it needs hot water. â?¢ Compared with boiler, stove and electrothermal device, our machine more reliableï¼?can avoid fuel leakage, fire disaster, explosion, electric leakageï¼?and poisoning. â?¢ Around tempï¼?5â??-40â?? â?¢ It will be adjusted before delivery. To use our machine, you just need to connect it with pipes and power. â?¢ Control tempï¼?15â??-45â??ã?? â?¢ Refrigerantï¼?R22(or select R407C/R134a/R410a/R404a) â?¢ Powerï¼?2HP-60HP (0.37Kw-45Kw) â?¢ Heating capacityï¼?5200 - 150000 Kcal/h (6 â??175 Kw) â?¢ There`s air-cooled or water-cooled model, and can supply more or less type by requirements.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes colour, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. Rapid heating, constant to maintain the required drying temperature. The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
With over 20 years of R&D sophistication, Polar-Chiller has been a national market leader in the dehumidifying industry. Polar-Chiller Industrial Dehumidifiers are widely used in various fields. E.g. Normal space dehumidifying or material dehydration; Be it in a high or low temperature working environment, entailing moisture-proof & rust-proof production process, Polar Industrial Dehumidifier series has a model that best suits your varying dehumidifying requirements. Product Features Utilizes industrial-grade thickened brass, sheet metal, industrial dedicated heat sink. Heat exchangers are made of copper, aluminium or stainless steel. Manual or automatic control with double protection, ensuring uninterrupted operation. 2 control options: A) stand-alone mechanical control, using USA branded humidity controller; B) microcomputer control & LCD display of temperature and humidity using top-brand humidity sensor. All control and protection components are operated with independent, secure components. Reliability and durability are highly fulfilled. Equipped with high-performance protective device, the dehumidifier can operate in low or high temperature and high humidity environment. Polar dehumidifiers still outperform at 10??, and function exceptionally well at a temperature as low as 5??. Non-stop performance during defrosting with Dual-mode control. Refrigerant: R-22 ï¼?Also available are R407C/R134a/R410a/ R404a Excellent protection: Time Delay, Overload Protection, Automatic Humidity Control, Automatic Defrost, Pressure display & Control, Temperature Protection, Overload Protection, and Error Display, etc. Application Areas ROOM DEHUMIDIFICATION Polar-Chiller dehumidifiers function well at such venues as workshop, laboratory, storeroom, warehouse, swimming pool, machine room, filing room, library, bank safe, rooms installed/ stored with electronics, semiconductors, precise scientific apparatus, medicinal herbs, etc. DEHYDRATION/ DRY STORAGE OF PRODUCTS AND RAW MATERIALS The crude materials need to be dehumidified or stored in a dry room such as the food, the chemical, the marine product, the farm products, the printed matter, the crude drug, the lumber, the furniture, the paper, the polyester fibre and so on. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFICATION IN THE PROCESS Conventional Heating-Up Dehumidifier Suitable to roomage dehumidify, dampproofing and materiel universal temperature dry. Use temp:5ºC-40ºC With strong wind. Based on the load, it can regulate automatically. RC: packaged; RCA: wall mounted or packaged type. Highest service temperature can reach 40ºC and related humidity is 20%. Power source: 1 220V 50(60) HZ (8 L/h) 3 380V 50(60) HZ (8 L/h) Dehumidify capacity:2L/h - 100L/h
With over 20 years of R&D sophistication, Polar-Chiller has been a national market leader in the dehumidifying industry. Polar-Chiller Industrial Dehumidifiers are widely used in various fields. E.g. Normal space dehumidifying or material dehydration; Be it in a high or low temperature working environment, entailing moisture-proof & rust-proof production process, Polar Industrial Dehumidifier series has a model that best suits your varying dehumidifying requirements. Product Features Utilizes industrial-grade thickened brass, sheet metal, industrial dedicated heat sink. Heat exchangers are made of copper, aluminium or stainless steel. Manual or automatic control with double protection, ensuring uninterrupted operation. 2 control options: A) stand-alone mechanical control, using USA branded humidity controller; B) microcomputer control & LCD display of temperature and humidity using top-brand humidity sensor. All control and protection components are operated with independent, secure components. Reliability and durability are highly fulfilled. Equipped with high-performance protective device, the dehumidifier can operate in low or high temperature and high humidity environment. Polar dehumidifiers still outperform at 10 , and function exceptionally well at a temperature as low as 5 . Non-stop performance during defrosting with Dual-mode control. Refrigerant: R-22 Also available are R407C/R134a/R410a/ R404a Excellent protection: Time Delay, Overload Protection, Automatic Humidity Control, Automatic Defrost, Pressure display & Control, Temperature Protection, Overload Protection, and Error Display, etc. Application Areas ROOM DEHUMIDIFICATION Polar-Chiller dehumidifiers function well at such venues as workshop, laboratory, storeroom, warehouse, swimming pool, machine room, filing room, library, bank safe, rooms installed/ stored with electronics, semiconductors, precise scientific apparatus, medicinal herbs, etc. DEHYDRATION/ DRY STORAGE OF PRODUCTS AND RAW MATERIALS The crude materials need to be dehumidified or stored in a dry room such as the food, the chemical, the marine product, the farm products, the printed matter, the crude drug, the lumber, the furniture, the paper, the polyester fibre and so on. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFICATION IN THE PROCESS Ceiling Type Industrial Dehumidifier Suitable to roomage dehumidify, dampproofing and materiel universal temperature dry. With ceiling type design, it can be fixed on the ceiling without occupying so much space. With the functions of dehumidification, heat preservation, and filtering. Use temp: 5 -40 . Dehumidify capacity 1.5L/h 50L/h Power source: 1 220V 50(60) HZ(8L/h); 3 380V 50(60) HZ It is true of dehumidifier, heat insulation, and filtering, widely used sauna room, bathroom, swimming pool and dry room.
Product Features Utilizes industrial-grade thickened brass, sheet metal, industrial dedicated heat sink. Heat exchangers are made of copper, aluminium or stainless steel. Manual or automatic control with double protection, ensuring uninterrupted operation. 2 control options: A) stand-alone mechanical control, using USA branded humidity controller; B) microcomputer control & LCD display of temperature and humidity using top-brand humidity sensor. All control and protection components are operated with independent, secure components. Reliability and durability are highly fulfilled. Equipped with high-performance protective device, the dehumidifier can operate in low or high temperature and high humidity environment. Polar dehumidifiers still outperform at 10, and function exceptionally well at a temperature as low as 5. Non-stop performance during defrosting with Dual-mode control. Refrigerant: R-22 Also available are R407C/R134a/R410a/ R404a Excellent protection: Time Delay, Overload Protection, Automatic Humidity Control, Automatic Defrost, Pressure display & Control, Temperature Protection, Overload Protection, and Error Display, etc. Application Areas ROOM DEHUMIDIFICATION Polar-Chiller dehumidifiers function well at such venues as workshop, laboratory, storeroom, warehouse, swimming pool, machine room, filing room, library, bank safe, rooms installed/ stored with electronics, semiconductors, precise scientific apparatus, medicinal herbs, etc. DEHYDRATION/ DRY STORAGE OF PRODUCTS AND RAW MATERIALS The crude materials need to be dehumidified or stored in a dry room such as the food, the chemical, the marine product, the farm products, the printed matter, the crude drug, the lumber, the furniture, the paper, the polyester fibre and so on. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFICATION IN THE PROCESS Adjustable Temperature Dehumidifier It is suitable for roomage dehumidify, damp proof and materials or products low & conventional temperature dehumidifying and drying. When it works under the condition of high temperature and high relative humidity, the type of adjustable temperature can be operated to cool and dehumidify. But under the condition of cold and damp environment, it can be used to raise the temperature and dehumidify Use temp: 5-40. Power source: 1220V 50(60) HZ(8L/h) 3380V 50(60) HZ Dehumidify capacity 8L/h 100L/h Theres air-cooled type and water-cooled type with different installation options so that it can be widely used in different situation and places.
Product Features Utilizes industrial-grade thickened brass, sheet metal, industrial dedicated heat sink. Heat exchangers are made of copper, aluminium or stainless steel. Manual or automatic control with double protection, ensuring uninterrupted operation. 2 control options: A) stand-alone mechanical control, using USA branded humidity controller; B) microcomputer control & LCD display of temperature and humidity using top-brand humidity sensor. All control and protection components are operated with independent, secure components. Reliability and durability are highly fulfilled. Equipped with high-performance protective device, the dehumidifier can operate in low or high temperature and high humidity environment. Polar dehumidifiers still outperform at 10, and function exceptionally well at a temperature as low as 5. Non-stop performance during defrosting with Dual-mode control. Refrigerant: R-22 Also available are R407C/R134a/R410a/ R404a Excellent protection: Time Delay, Overload Protection, Automatic Humidity Control, Automatic Defrost, Pressure display & Control, Temperature Protection, Overload Protection, and Error Display, etc. Application Areas ROOM DEHUMIDIFICATION Polar-Chiller dehumidifiers function well at such venues as workshop, laboratory, storeroom, warehouse, swimming pool, machine room, filing room, library, bank safe, rooms installed/ stored with electronics, semiconductors, precise scientific apparatus, medicinal herbs, etc. DEHYDRATION/ DRY STORAGE OF PRODUCTS AND RAW MATERIALS The crude materials need to be dehumidified or stored in a dry room such as the food, the chemical, the marine product, the farm products, the printed matter, the crude drug, the lumber, the furniture, the paper, the polyester fibre and so on. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFICATION IN THE PROCESS Conventional Temperature Dehumidifier It is suitable for materials or products dehumidifying and drying in normal temperature, as well as working places dehumidifying. Use temp5-40 Bigger dehumidifying capacity. When it is under operation, outlet air temperature is similar to inlet air temperature. This will not obviously increase inside temperature or ACs load. Power source: 1220V 50(60)HZ; 3380V 50(60)HZ Dehumidify capacity8L/h 100L/h Theres air-cooled type and water-cooled type with different installation options so that it can be widely used in different situation and places. It can ensure foods flavour especially for sea products and aquatic product or similar products drying.
Inv compressor We sale all kinds of gmcc compressor with resonable price and high quality
Daikin compressor for commercial ac Model variety Welcome to inquiry!
We have variety model for your choice. Welcome to inquiry All the products are 100% brand new
Mini Bus Air Conditioning Unit The Mini bus air conditioner unit is designed for air conditioning passenger, tour, school buses or any size of urban transportation (diesel or electric powered). Mini bus air conditioner unit is a highly advanced and reliable air conditioning system designed for mini buses. The system provides superior comfort to passengers, ensuring they remain relaxed and refreshed during their journey. The Mini Bus Roof Air Conditioner is a complete solution that provides reliable and efficient cooling in a compact and stylish design. SZG series is a kind of roof mounted air conditioner. It is applicable to 6-8.4m city bus and 5-8.9m tourist bus. In order to have the widest range of the application of the bus models, there are two kinds of width of the SZG series, in 1826mm and 1640 respectively. For more details please check below or you can contact with us at sales@shsongz.cn for more details. Advantage High efficiency: The minibus roof air conditioner performs efficiently to ensure that the interior temperature is maintained well and the humidity inside the vehicle is reduced to ensure a comfortable environment. Streamlined design: The design of the minibus roof air conditioner is streamlined, compact and aerodynamic. It is designed to fit on the roof of the minibus without causing any burden. Easy maintenance: The minibus roof air conditioner is easy and hassle-free to maintain, making it perfect for both commercial and personal use. ADVANCED CONTROL SYSTEM: The minibus roof air conditioner is equipped with an advanced control system that allows the driver or passenger to adjust the temperature and airflow as needed. HIGH QUALITY MATERIALS: the minibus roof air conditioner is made of high quality materials that can withstand harsh weather conditions and dust.
Air Conditioner for Passenger Car Today, vehicles have reached a high level of climate comfort and will continue to improve in the future. However, automotive air conditioners do much more than provide a comfortable driving experience. They also play a key role in safety. In addition to keeping drivers comfortable and alert, air conditioners dehumidify cabin air, which prevents windows from fogging up. Advantages A car air conditioner captures outside air, cools or heats it, and then filters it before venting it into the cabin. In addition to comfort, this process offers many other benefits. Air Conditioning and Comfort The primary function of a car's air conditioner is to ensure climate comfort by providing cooled or heated air. Efficiency Closing the windows to allow the car to circulate in the air prevents outside air from constantly entering the cabin, improving aerodynamics and reducing fuel consumption. Health Activating the air conditioning allows the driver and passengers to close the windows as it ensures a supply of filtered air and prevents pollutants from entering the cabin.
Wall split air conditioner, with cooling and heating function, 12000 btu, 1 ton, 3500W, 1080 W. 220v 50hz. Energy efficiency Class A+, Made in China.