General standard:
Size: 2000/4000*1200(L*W)
CompressiveStrength:450kpa
Thickness:20mm(also provide 25mm and 30mm)
Water Absorption:2.90%
Alum.Foil Thickness:0.08mm(both sides)
Dimensional Stability:0.53%(70+/-2
Density:71kg/m3
Oxygen Index: 57.80%
Fire Retardant: A
Smoke Density: 2
Thermal Conductivity: 0.018W/m.k
Smoke Toxicity: 25
(Average Temperature 25+/-2)
Advantage :
Lower heat conductivity, higher thermal efficiency;
High Fire-Protection rating
Low density, light weight;
Easy Installation
Foamed with CFC free materials, environment protective;
Hermetic seal ensures little air leakage;
With aluminum foil reinforced on both side, its corrosion protective, hygiene, and has a beautiful appearance;
Foamed with closed-cell structure, its water-proof and sound-insulated.
No protrudent flange on the connections, it can save a lot of.
General standard:
Size: 2000/4000*1200(L*W)
Compressive Strength: 450kpa
Thickness: 20mm(also provide 25mm and 30mm)
Water Absorption: 2.90%
Alum.Foil Thickness: 0.08mm(both sides)
Dimensional Stability: 0.53%(70+/-2
Density: 71kg/m3
Oxygen Index: 57.80%
Fire Retardant: A
Smoke Density: 2
Thermal Conductivity: 0.018W/m.k
Smoke Toxicity: 25.
(Average Temperature 25+/-2).
Advantage :
Lower heat conductivity, higher thermal efficiency
High Fire-Protection rating
Low density, light weight
Easy Installation
Foamed with CFC free materials, environment protective
Hermetic seal ensures little air leakage
With aluminum foil reinforced on both side, its corrosion protective, hygiene, and has a beautiful appearance
Foamed with closed-cell structure, its water-proof and sound-insulated.
No protrudent flange on the connections, it can save a lot of building .
General standard:
Size: 2000/4000*1200(L*W)
CompressiveStrength:450kpa
Thickness:20mm(also provide 25mm and 30mm)
Water Absorption:2.90%
Alum.Foil Thickness:0.08mm(both sides)
Dimensional Stability:0.53%(70+/-2
Density:71kg/m3
Oxygen Index: 57.80%
Fire Retardant: A
Smoke Density: 2
Thermal Conductivity: 0.018W/m.k
Smoke Toxicity: 25
(Average Temperature 25+/-2)
Advantage :
Lower heat conductivity, higher thermal efficiency;
High Fire-Protection rating
Low density, light weight;
Easy Installation
Foamed with CFC free materials, environment protective;
Hermetic seal ensures little air leakage;
With aluminum foil reinforced on both side, its corrosion protective, hygiene, and has a beautiful appearance;
Foamed with closed-cell structure, its water-proof and sound-insulated.
No protrudent flange on the connections, it can save a lot of building space.
WIth Digital Display of Humidity (RH%).Suitable for 150 Sq Ft of close room. for Domestic & Inustrial applications. with inbuilt Water collection Tank.
1. Alu. alloy centrifugal type blade air wheel construction, matched high efficient volute design, advanced efficiency, low noise, large air volume and high pressure
2. All-metal housing, advanced water and fire proof, easy installation and cleaning
3. Optimized motor operates 5000 hours continously without any defects
4. Multiple body spec.: 900mm, 1000mm, 1200mm, 1500mm, 1800mm and 2000mm
5. Various installation height: 5m, 6m, 7m and 8m.
1. Elegant and cool design
2. Forward-bending centrifugal type blade air wheel construction, matched high efficient volute design, max. 20m/s air velocity, high pressure and silent running
3. Double air deflector design, more stable air flow
4. Optimized motor operates 5000 hours continuously without any defects.
Body size: 900*230*210mm
Carton dimension: 950*270*260mm.
CEAV Diameter
28 Inch (710mm)
Neck/Throat Diameter
21 Inch (530mm)
No. of Vanes(Blades)
36 Vanes
Height
19 Inch (480mm)
Base Ring
Stainless Steel (Jindal make)
Top Cover Stainless Steel (Jindal make).
Top Plate MOC Aluminium 1 mm Thickness
Alloy 8011 H2
Vanes MOC Aluminium 0.635mm Thickness
(Hindalco make)
Bottom Ring Aluminium 1.27 mm Thickness
(Hindalco make)
Rotation
Pivot bush support w/o Bearing
Pointer MOC 10 mm Ø EN-8 with Electroplating
Supporting bush MOC
Derline black( Hardest PTFE grade)
Center Shaft
M.S. 20mm Ø with Nickle Plating
Inner Arms
M.S. with Electroplating
Outer Arms
M.S. with Electro Plating
Center Pipe
M.S. with Electro Plating
Nett. Weight
5.8 Kgs (Approx.)
Packing As per requirement.
VENCO energy recovery units (VER), are designed to have high efficiency by using rotary type heat exchangers. The efficiency of VER units is about 80% and this value is higher than the efficiency of VHR units (aluminum plate heat exchangers) at least 25%. By the way, the supply air temperature will be too close to the room temperature and it would not be necessary to use additional heater.
Rotary type heat exchangers transfer the humidity as well as the heat. By the way, humidity will be transferred to the supply air from the fresh air in winter. And it is transferred to the exhaust air in the summer time. It helps to keep the humidify level close to the comfort conditions.
7 standard models, with TSEK certification and CE marked in compliance with applicable directives,
Indoor air quality with synthetic filters, The design, providing fast and easy installation and maintenance,
Low noise level and working on required capacity by using direct driven fan with 3 speeds,
The excellent sound and heat isolation, due to fully insulated cabinet, all standard models are available in stock,
Please contact us for non-standard capacities.
VENCO Heat Recovery Units (VHR SC) are designed for saving energy and also improving indoor air quality. High Efficiency plug fans are used in these units. VHR SC Units provide the facilities of air-conditioning applications (residential, commercial and industrial areas) by using the plate type heat exchangers that recover the heat. The heat is transferred from warm air to cold air by the exchangers with high conductivity, efficiency and performance. The unit could be equipped with the accessories; Duct Type Electrical Heater, Hot water Coil, Silencer, High Efficiency Filter, By-Pass Kit, Carbon dioxide or Air Quality Sensor. HS Code is 841950000000
- No heating device required. Lower energy consumption.
- Best dehydrating solution for food industries including seafood, and agricultural produce.
- The heat pump drying is a method of low temperature (15~40/50/60/70/80íµ) drying, nearly air dry. The evaporating speed of surface is similar with the speed which the inside moisture moves to the surface. This drying method makes the merchandise remains good quality, nice color, high level, no pollution and saving resources. The heat pump drying can be widely used in paper making, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc.
- Working temperature: general model 18-40;low temp model 10-40;high temp model 18-50.
- Polar water chilled conditioner is designed for both industrial and business sectors. Available are water cooled packaged air conditioner, water cooled ceiling air conditioner, and water cooled split air conditioner.
- Components are sourced from worlds leading manufacturers, ensuring stable, accurate, and long-lasting performance.
- Condenser and Evaporator employ premium screw copper pipe that facilitates heat exchanging. Stable, durable, easy maintenance. Evaporator fin is made of high-performance thickened material. Ideal for adverse working conditions.
- Refrigerant: R22 (also available are R407C/R410a/R134a/R404a)
- Complete protection devices equipped include high pressure protection, low pressure protection, over current & over load protection, time delay, phase sequence protection, phase shortage protection, and water shortage protection, as well as interlocking protection.
- warmth and wet air pass filter to evaporator, the temperature dropped to dew point, The steam condensed into water drops flowing into pool, that the air pass the condenser, air temperature rise become dry.
- Theres air dehumidify and constant temperature;air dehumidify & water constant temperature, and can select ceiling or packaged or split or wall mounted type.
- Before delivering from manufacturer. Machine can be used after connecting with pipes and power.
- Suitable to dehumidify the indoor air and make pool waters temperature to be constant, such as indoor pool .
Heat Pump Heat Recovery Ventilation Units with heat pump, designed for saving energy and also improving indoor air quality. VHR DX Units provide heat recovery and well conditioned fresh air by air to air plate type exchangers and heat pump. 30 ¦C fresh air in the summer time and 12¦C fresh air in the winter time can be obtained by usual heat recovery units, but these results are not comfortable. You can obtain 20¦C fresh air in the winter time with high efficiency heat pump.
Cartoon Box and Pallet
3411 Heating Air Conditioner Ventilation Suppliers
Short on time? Let Heating Air Conditioner Ventilation sellers contact you.
