ASTM A178 Electric-Resistance-Welded Carbon Steel And Carbon-manganese steel boiler and superheater tubes Tube Details: 1) A178 Chemical Component Analysis(%): Gr. A: C: 0.06-0.18; Mn: 0.27-0.63; P: < 0.035; S: < 0.035; Gr. C: C: < 0.35; Mn: < 0.80; P: < 0.035; S: < 0.035; Gr. D: C: < 0.27; Mn: 1.00-1.50; P: < 0.030; S: < 0.015; Si: > 0.10 2) Tensile Requirements: Gr. A: Tensile strength Min. 47Ksi; Yield Strength Min. 26Ksi, Elongation: 35%. Gr. C: Tensile strength Min. 60Ksi; Yield Strength Min. 37Ksi, Elongation: 30%. Gr. D: Tensile strength Min. 70Ksi; Yield Strength Min. 40Ksi, Elongation: 30%. 3) Manufacture Method: Electric-Resistance Welding; 4) Surface treatment: ASTM A178 & ASTM A450-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating, etc; Or Oil-dip paint black with two plastic caps on each end 5) Quality Test: ASTM A450-Chemical Component Analysis, Mechanical Properties(Ultimate tensile strength, Yield strength, Elongation), Technics Properties(Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, etc), Exterior Size Inspection, Nondestructive electric Test, Hydrostatic Test, magnetic particle testing; 6) Packing: Hexagonal bundles with several steel strips, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires; 7) Applications: Boiler and Heat Exchanger(Wal panel, economizer, reheater, superheater and steam pipeline of boilers), Hydraulic and Petrochemical Purpose, etc. 8) Origin: China Commercial Information: 1) Delicery time: 45 days ready at mil also according to the actual weight; 2) Minium order: 15 Ton/Dimension while not stock raw material; 4) Term of payment: T/T or L/C at sight; 5) Delivery Port: Shanghai Port; 6) Offer Validity: 7 Days; 7) Container: 20GP or 40GP or Bulk; 8) Manufacture methods: ERW method.
Pure Water Cooling Unit Suitable for equipment normal temperature cooling. Cooling down mould tools or equipment while keeping uninterrupted flow of clean Water with low energy consumption. Options: water-cooled or air cooled.
Low-temperature packaged chiller To serve the needs of the equipment or technics low temperature cooling each industry. Import medium and low temperature hermetic or semi-hermetic compressor. Packaged configuration, has ice water pump and stainless-steel water tank inside. Relay or microcomputer or plc control. Temperature control range: -40â??- +5â??. Refrigeration power:3hp-40hp. Water-cooled or air-cooled. Special industrial chiller for industry For cnc machine For pharmaceutical industry For plastic uptake industry For plastic mould industry For cd-rom manufacturing industry For chemical coating industry For packaging and printing machine For laser cutting equipment For laboratory equipment For electrical discharge machine For textile manufacturing For electroplating industry For food industry For leather industry For floor glue industry For leatherette industry For concrete industry For polyurethane industry For die-casting machine For cosmetics and commodity industry For optoelectronic industry
Industrial Cooling Heating Water Unit During industrial production, for technology and season demand, require cooling or heating at different times. Relay or microcomputer control. Temperature control range: ice water 3 -30 hot water 40 -90 Refrigerated capacity 14000Kcal/h - 75000 Kcal/h (5HP-30HP); heating capacity: 15KW-30KW There are air-cooled type and water-cooled type Can order smaller or larger type. Special Industrial Chiller for Industry For CNC Machine For Pharmaceutical Industry For Plastic Uptake Industry For Plastic Mould Industry For CD-ROM Manufacturing Industry For Chemical Coating Industry For Packaging and Printing Machine For Laser Cutting Equipment For Laboratory Equipment For Electrical Discharge Machine For Textile Manufacturing For Electroplating Industry For Food Industry For Leather Industry For Floor Glue Industry For Leatherette Industry For Concrete Industry For Polyurethane Industry For Die-casting Machine For Cosmetics and Commodity Industry For Optoelectronic Industry
Biomass Gasifier Burner,
Industrial Biomass Gasifier,
Wood Pellet Gasification
Industrial Biomass Gasifier,
Fluidized-bed Gasifier,
Fixed Bed Gasifier,Biomass Gasifier
Fixed Bed Gasifier
Residential Biomass Gasifier,
Straw Gasifier,Biomass Gasifier
Fluidized-bed Gasifier,Biomass Gasifier
Industrial Biomass Gasifier,Biomass Gasifier
Residential Biomass Gasifier,Biomass Gasifier
Straw Gasifier,Biomass Gasifier
Blast furnace slag capacity:1.5-25(t/h) Cement capacity:3-50(t/h) Raw material capacity:6-110(t/h) Our advantage 1. Comprehensive service We zk company is the professional slag powder production line supplier. We can provide both ball mill and vertical mill production process, while providing 'turnkey' service from civil engineering to commissioning. 2. Serious quality control Zkcorp has a strong capacity of manufacturing and could control product quality seriously with short delivery time. Expert installation and after-service team could ensure to finish plant installation and start running on time 3. Low cost and proper investment. Slag vertical mill production line from zkcorp engages the advantages of simple process flow, high-efficiency of grinding, great drying capacity, efficient powder-classifying, easily-adjustable outputting size, low noise and electricity-consumption, small mill consumption, high degree of automation, low running expense, which make it suitable for small and middle plant owner. Production process by vertical mill Slag is transported into the plant by truck and stored under the shed. After reclaiming by loader and metering by feeder, the material is delivered and de-ironed into the vertical mill by the belt conveyor and its magnetic separator. After de-ironing the slag enter the vertical mill for grinding. Dried and grinded slag powder is collected by the separator and sent into the finished product silo by air chute and bucket elevator. The discharged slag is sent back to the mill by conveyor and elevator. The drying heat source is provided by an air heating furnace.
Radiant tube steam superheaters are one of the most important accessories of boiler that improves the thermal efficiency. In super heaters there should not be any fins as it increases the thermal stresses and carful should be taken when choosing the superheater material that is stand for high temp and corrosion resistance. Parameter China supplier argon arc welding radiant tube steam superheater with best price We are boiler parts manufacturer, we supply boiler parts with high quality. Info.of pipes O.D. 10MM to 114MM W.T. 0.8MM to 15MM Tolerance AS STANDARD Certificated by TUV,SGS,ISO Other service Special specifications are aslo supplied according to customers' requirements Payment as the order Delivery time Within 30days upon receving the deposit, Company name  Shandong Hengtao Energy Saving & Environment Protection Co., Ltd. Market Asia,Europe,North America, Africa and so on Please feel free to contact me to know more information about the products,and warmly welcome to visit our factory when you come to China Contact information Material China supplier argon arc welding radiant tube steam superheater with best price is made of bare pipes (including carbon steel, alloy steel, heat resistant steel, etc), headers and other auxiliary materials. The pipes generally have OD32, OD38, OD42, etc or customized specifications for the users. Features With the artistic appearance and accurate size, the advance process for bending tube and welding, the first rate test equipment and sophisticated technology. Application Reheaters and superheaters are a set of tubes located in the boiler. Steam from the water walls passes to the superheaters where it is heated above its saturation temperature until the maximum required operating temperature is achieved. The superheated steam then flows through the main steam piping to the high-pressure turbine. Exhaust steam from the high-pressure turbine is guided to the boiler for reheating and from there to the intermediate and low-pressure turbines. High reheating temperatures improve the output and efficiency of a power plant.
An air preheater (APH) is a general term used to describe any device designed to heat air before another process (for example, combustion in a boiler) with the primary objective of increasing the thermal efficiency of the process. They may be used alone or to replace a recuperative heat system or to replace a steam coil. Normal air preheater exist the problem of collection of ash,worn down,low temperature corrosion to effect the safe and economical operation for the boiler unit. So HTEG established the exclusive enamel research and development center to supply the complete solution and organize the scientific reserach personnel to tacle key problems and develop the new heat transfer parts-enameld tubes air preheater The purpose of the boiler heat exchanger parts air preheater is to recover the heat from the boiler flue gas which increases the thermal efficiency of the boiler by reducing the useful heat lost in the flue gas. As a consequence, the flue gases are also conveyed to the flue gas stack (or chimney) at a lower temperature, allowing simplified design of the conveyance system and the flue gas stack. It also allows control over the temperature of gases leaving the stack (to meet emissions regulations, for example). Advantages of our product GB3274 enameled tube air preheater a).Improve and strengthen the combustion when crosses air preheater then enters the furnace, accelerates the fuel drying,the ignition and combustion process, ensures stable combustion in the furnace, and it is good for improving, strengthening the combustion effect. b). strengthen heat transfer due to improved and intensified combustion furnance and the hot air temperature in the furnace is improved, the average temperature level in the furnace is improved, thereby strengthening the furnace radiation heat transfer.
