Technical data Model: HH1806A Surface material: White aluminum sheet Frame: White Aluminum Back material: Aluminum foil cloth Heating element: NiCr heating wire Voltage: 220-240VAC Power: 1400W Surface temperature: 110-130â?? Installation: Ceiling Protection Grade: IP52 On/Off switch: No Body size: 1827*627*23mm Default cable length: 1.9m Warranty: 2 years MOQ: 10PCS
Voltage: 1-220V Insulation Material: Transparent PET Thickness: 0.2-1.0MM Static Power Deviation: +/-10% (according to customer requirements) Withstand Voltage: Withstand Voltage AC 1500V 5MA/min Insulation: Insulation DC 1000V 100M Temperature: -40 C - 100 C (Below 90 C For Long-term Use) Installation Method: Transparent Adhesive Paste Certification: ISO9001, CE, Rohs, UL Solder Joint Insulation Treatment: Epoxy Temperature Control Mode: Adjustable Thermostat, Temperature Control Switch Electric Connection Method: Binding, Welding
Tubular Heaters are straight, or configured with one or more bends. They are utilized for both immersion and air heating applications. More commonly, they're used in immersion applications. And of all the heating applications, Tubulars are perhaps the most reliable and versatile for configuration of: wattage, terminations, materials, mounting options, and lengths. The numerous available application possibilities, make the Tubular heater adaptable to almost any customer request. We are pleased to offer customers any termination
Clear heaters are ideal for preventing condensation and frost on vehicle cameras, optical sensors, side view mirrors and other locations where the space for the heater to work is limited. Transparent heaters are critical for use in the challenging environments of cameras, LCDs, and optoelectronics below -10 C. Applications in avionics, cameras, LCDs, and automotive require heaters so they can operate in cold and harsh climates. The resistance of the heater determines the required heating rate and power utilization. The lower the resistance, the higher the power required and the higher the heating rate. Using a heater is the easiest solution. How do transparent heaters work This transparent heater usually consists of a transparent conductive layer of indium tin oxide (ITO), which is applied to a transparent substrate such as glass or plastic. When electricity passes through the conductive layer, it generates heat while still maintaining its transparency.
Current Specifications for Silicone Heaters Maximum Watt Density: 60 W/in Maximum Operating Temperature: 482 F Minimum Operating Temperature: 40 F Wattage Tolerance: 10% Dielectric Strength: 1000 VAC
promotional plan We can offer cheaper prices as humanitarian assistance Customized services can be provided. If you have any questions or needs, please do not hesitate to contact me
We have an extensive stock of surplus parts and 2nd source parts, largely for AMAT, Centura, Endura, HDP Ultima Plus, Novellus, LAM, Mattson, TEL Parts, IMP Parts, etc. This stock changes regularly as we gain excess items from our many equipment refurbishment projects
Ceramic heater are widely used in pre-heating of plastic sheets for vacuum forming & thermoforming, drying paints, lacquer & varnish curing, drying printing inks, drying textiles, activating adhesives, removing surface water from objects or moisture removal from fabric and paper, animal husbandry and rearing.The ceramic IR heaters are highly efficient.Ceramic infrared heater offers precise targeting and control with minimal peripheral heat. It is possible to apply heat only where and when it is required.
Only defects that cannot be refurbished are defects on the puck, like cracks and fractures of ceramic parts. There are heat wires inside the ceramic puck and if the puck is broken,it is very probable that heat wires are damaged, which cannot be repaired.
In case of all Mca e-chuck, Mca heater, ESC, ALN Heater, Magnet Assy products used in PVD manufacturing process, we offer a various services of refurbishment that are conducted by our own engineers and in-house. Or if customers ask, we provide new one.
The Ceramic Heater is ideal for spot heating or area heating of remote locations, farm buildings, shops, service areas, pump houses or other hard-to-heat spaces, providing both fuel efficiency of radiant heat and installation flexibility not recommended for car washes. This is a Millivolt Standing Pilot heater and does not require an external power or electricity to operate, so it's great for use during power outages. Requires Millivolt thermostat for SGM sold separately. May require the following second stage regulators prior to the heater based on gas supply pressure
MCA ESC is a key consumable part of the PVD equipment used in the deposition process in the semiconductor manufacturing process that should be replaced regularly due to high temperature/ high pressure conditions and quality problems because of impurities in the chamber.
AMAT MCA E-chuck Heater PVD process parts warranty : 3 months condition : Used like OEM-New (All refurbished) P/N 0010-01288 AMAT MCA E-chuck Heater PVD process parts
product characteristics: 1. high-quality stainless steel (SUS316 or SUS304) tube core tube (PTFE) made of Teflon coat, strong corrosion resistance, suitable for all kinds of corrosive liquid heating. 2. low surface power design (1.5KW/CM2), to ensure the service life of the product The installation position of the electric heater 3. need to pay attention to prevent the deposition of solid solution to the surface of the electric heater, or liquid is too thick, too low surface because the surface will spread to keep poor heat and burn Teflon tube (PTFE) 4. the size of the electric heater can not be arbitrarily changed and changed the surface area, otherwise the surface power of the electric heater will be too large, and the service life of the electric heater will be affected 5. all electric heaters can be equipped with overheat protector or PT100 temperature probe, so as to ensure the service life of the product and the safety of the equipment 1. for Teflon (PTFE) tube, excellent corrosion resistance, so it is widely used in the oxidation of acid polishing, electroless plating, electroless plating, electroless nickel plating and various high heating chemical liquid. 2. can design a variety of structural forms, such as spiral type, L type, U type, W type, mosquito repellent incense type, combination type and so on Our company has 3. Teflon heaters mandatory CE certification through the EU market note: all equipment, including a heater and the control element has been inspected strictly before shipment, the purchase date, provide the manufacturing technology and material double a year warranty repair. In normal, if there is any damage under the correct use, offer free maintenance service. But the improper use of customer, misuse, damage caused by installation error. It is not guaranteed. Such as: - solvent - high temperature appears too thick dirt - - solvent - solvent flow stops - use prohibited drugs - - charging occurs - with the use of other acid leads to second chemical reaction Should have - - solvent oxygen or oxidizer - - misconnected - - corrosion action circuit - - welding agent on the surface of the liquid floating - - due to man-made scratch Teflon surface, make the electric heater not work - - gas insoluble when leaving - liquid or liquid level below the heater heating section caused by dry burn other mobile devices. First, product characteristics: Other damages, such as mobile equipment, re installation, unauthorized maintenance and accidental or inevitable damage, etc., are not responsible for the cost of the loss All jinnuoda factory of products with product description. Please refer to the attached pages of the correct selection of the electric heater or contact the company directly. If there is any unknown matters or have any questions about the product, welcome to contact us.
Type: Aquariums & Accessories Aquarium & Accessory Type: Lightings Feature: Eco-Friendly, Stocked Place of Origin: Guangdong, China (Mainland) Brand Name: GAKO Model Number: SQ-9YK SIZE: 24cm LED NUMBER: 9PCS IN V.HZ: 100-240V/50-60HZ OUT V.: DC12V POWER: 3.1W color: white,blue,red,RGB shell material: plastic type: SMD5050 warranty: 3 year Usage: Aquarium Tank Decoration
Duct heaters are mainly used for heating air through the duct. There are three types, low temperature, middle temperature and high temperature. The outer stainless steel sheath and construction can reduce the vibration of heating elements. There is a overheat protector in the terminal box. Air pressure through the duct should not exceed 0.3KG/cm?. Or else it is better use recirculation duct heaters. Max temperature of low temperature duct heater is not more than 160 C. Max temperature of middle temperature duct heater is not more than 260 C. Max temperature of high temperature duct heater is not more than 850 C. lt has been applied extensively in aerospace industry, weapon industry, chemical industry, and research and manufacturing laboratories in institutions of higher education. etc.
*Portable air heater *Function on propane gas (LPG) *With P.C.panel to smart setting temperature *With over-heating protection *Cut-off protection avoid gas leaking *Regulator & 1.5m hose included *lgnition type: Automatically *Special nozzle, with strong oxygen supply make combustion completely
Graphene Electric Heater Blanket,5 Levels Thermostat, Safety washable,Heated Blanket Mattress,Temperature control on both sides
DL-2 model electric air heater with Left-Right Circulation is consists with 6 parts: electric heater + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by electric heater. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel electric heating finned tube, durable 4. Automatic control system, group start and close, low load, precise temperature control 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
DL-1 model electric air heater with upper inlet and lower outlet is consists of 4 parts: stainless steel electric heating finned tubes + insulation box + fan + control system. The electric heating groups start sequentially to convert electrical energy into heart. And heating the fresh air entering the box at a setting temperature, then blow out by fan. 4ã??Advantages/features 1. Simple structure, beautiful appearance, low cost 2. Stainless steel electric heating finned tube, durable 3. Automatic start and close, precise temperature control, energy saving, low load 4. Large air volume and small wind temperature fluctuation 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
