Feature Inner tank: Food Grade Stainless Steel by argon protect welding, supply water quality and drinkable Outer shell: Galvanized Steel coated uncorrosion layer Heat insulation layer: 50-60mm import polyurethane integral foaming Frame: Galvanized Steel coated uncorrsion layer, both install inclined and flat roof. High Pressure Cold Water In: 6 bar cold water to tank from Feeder or Electric Auto Valve. Automatic Heating Element free 1% spare parts are free All install documents are free Specification Tank capacity (L): 100L-300L Tube specification (Diameter x Length) (mm): 47 x 1500, 58 x 1800 Tube quantity: 18-36 Tube vacuum degree: 5 x 10-3 Tube absorption >0.88 Tube heat loss
Advantage Feature: More heat-collecting: whole glass vacuum tube; Good heat preservation:thinken polyurethane layer,professional forth technics,completef froth,improve the design of water outlet,improve the heat preservation of tank; Low cost:It doesnt consume groovy energy,no pollution,cost once but benefit long; Easy install:Joint ostium adapts especial technology,no leakage,easy install; Long lifetime:inner and outside shell are made of SUS304 stainless steel,and its life time is more than15 years; Complete specification:ordinary model,slope model,project model,there are about three series and more than forty kinds for you; More choose:We follow clientsdemand to choose relevant inclosure to extend the function of solar water heater; Good service:You can contain dealer in your place anytime if there is something wrong in your products bought in our company, and you also can contain our company direct. With reassurance to buy and comfortable to use. Perfect part: Vacuum tube- It adopts advanced a new technology named 12 layer spurt plating. It choose super hard borax and silica glass, and selective absorb coat through gradual change A1-N/A1,so that the tube has high-powered absorptance and low reflectance. It through interlayer vacuum has inimitable heat preservation effect, its radiation is strong and the temperature can be to 270; Heat preservation shell of tank- It adopts West Germany import polyurethane forth technics, the foam is thin,uniformity, the density is rational and close rate is high. Its heat preservation shell is 50cm, so its heat preservation effect is better; Outside water tank- It choose import good SUS304 BA food grade stainless steel, which looks beautiful and decent; Inner shell It choose import good SUS304 BA food grade stainless steel, with high frequency jointing technic,so the welding line is in the bottom of tank, so the hot water producted is health and sanitary can be drunk; Cover of top tank- Pressing molding with wale avoid fake. It adopts thinken stainless steel, which has longer lifetime than plastic cover of top tank; Airproof and dustproof winding- All of them adopts silicon rubber as material, which has better qulity and longer lifetime; Frame- It adopts stainless steel frame,and the whole combination avoids the lose in the transportation.
We are the manufacture of plug, if u interested in any specification,pls let me know.
Working principle: * The separate pressurized solar water heater compose of solar collector, storage tank, controller, working station and installation parts. * When the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically. * The circulation pump makes heat-conducting liquid circulate automatically. * The heat-conducting liquid transfers heat to water by heat exchanger in the water tank. * In case the temperature of the water tank does not reach T-max, then start the auxiliary heating device. * If discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically. Features: * Collector separates with the storage tank. The tank can be put anywhere of the house. * Module design, arbitrary combination, harmony with the building perfectly. * Intelligent control and automatic operation. * Anti-freeze: No water inside the tubes when it works. * The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature. Key specifications: * Heat-collection tube: High borosilicate3.3 glass with copper pipe * Inner tank: With enamel layer (2.0mm) * Outer tank: Colored steel: 0.5mm * End Cover of Tank: Colored steel (0.5mm) * Frame: Stainless steel 301 * The material of insulation: Polyurethane Foaming 50mm * Electrical Heater: High grade tube with dry-heating safeguard (1.5kw-3kw, 220v, 50Hz) * Safety Valve: Brass valve (1/2") * Controller: Circulation pump, Joints and other valves
Working principle: * The separate pressurized solar water heater compose of solar collector, storage tank, controller, working station and installation parts. * When the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically. * The circulation pump makes heat-conducting liquid circulate automatically. * The heat-conducting liquid transfers heat to water by heat exchanger in the water tank. * In case the temperature of the water tank does not reach T-max, then start the auxiliary heating device. * If discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically. Features: * Collector separates with the storage tank. The tank can be put anywhere of the house. * Module design, arbitrary combination, harmony with the building perfectly. * Intelligent control and automatic operation. * Anti-freeze: No water inside the tubes when it works. * The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature. Key specifications: * Heat-collection tube: High borosilicate3.3 glass with copper pipe * Inner tank: With enamel layer (2.0mm) * Outer tank: Colored steel: 0.5mm * End Cover of Tank: Colored steel (0.5mm) * Frame: Stainless steel 301 * The material of insulation: Polyurethane Foaming 50mm * Electrical Heater: High grade tube with dry-heating safeguard (1.5kw-3kw, 220v, 50Hz) * Safety Valve: Brass valve (1/2") * Controller: Circulation pump, Joints and other valves
1) Large VFD monitor displays the actual water temperature and output. 2) Built-in ELCB; reliable test device to prevent electric leakage 3) Thermal Cut-Out-Prevent scalding 4) Unique design & IPX4 splash proof casing 5) Protection of over water pressure 6) Temperature setting of outlet water. 7) Capable to work with low water pressure as 2L/min 8) Automatic Malfunction checking. 9) Constant type 4pcs/cartion Gift Box Dimensions: 63.3*16.6*31.5cm Cartion dimensions:69*61*33cm N.W of 1 carton: 21.2Kgs G.W of 1 carton: 23.1Kgs
1.Led monitor display with turning dial 2.Electronic variable temperature control 3.Elcb reliable built-in elcb test device to prevent electric leakage 4.Thermal cut-out-prevent scalding 5.Unique design splash proof casing 6.Flow switch as safety device 7.Start up with auto low water pressure. 8.Over high temperature protection with auto regulation. 4pcs/carton Gift box dimensions:63.3*16.6*31.5cm Cartion dimensions: 69*61*33cm N.W.Of1 carton: 21.2kgs G.W.Of 1 carton: 23.1kgs
Gas water heater Per pcs packing
Electric heater Type: jg-2000s Power: 2000w/220v, 1500w/127v New type design, more safety high heating efficiency, quartz tube heating G.W: 20kg ; n.W: 15.5kg Product size: 46.5x21x25.5cm Packing : 6 pcs / carton, 66.5x47.5x53cm Qty : 40hq cntr : 2430pcs
portable electric heaters. various style and configurations. Also, will manufacture specifications to order Core manufacturer
We're the pioneer company in the research & development and manufacturing of the solar water heaters. Consol solar is a supplier of high quality, low cost, easy to install. Solar energy superconductive vacuum collector tubes. Heat pipe has a low hot capacity, and has rapid heat exchange (it is 1000 times of copper heat exchange speed), so it is an available speediness heat exchanger. Heat exchange rate is up to 99%. The startup is fast, collect solar energy fully, at 25, 5 minutes can startup heat. At the same time, it has heat exchange unilateralism diode function system, for example: heat energy exchange is a direct progress from heat absorber to water. But it will not back up or reversal in the water. Because of matter physics effect in the heat tube and especial construction of condenser, the biggest work temperature of this system will be controlled; this particular characteristic ensures the stability under especially conditions
Features : 0.8kg heat exchanger 0.5mm panel Pulse ignition 20 minutes timer Zero pressure start Gift box
0.8kg heat exchanger 0.5mm cover 4.2kg
Product Characteristics Extra large heat capacity and more water to satisfy the needs concerning bath and other hot water requirements. The support is designed with an overall industrial model, which is simple, direct and stable. The 2.1m extra long high temperature pipe with special effect has the patent of interferential film technology, thus increasing the heat collection performance by 12% compared to normal pipes and bearing more stable performance. The equipment has extra thick and extra strong heat preservation layer and the fully automatic constant-temperature and high-pressure quantitative foam. The heat preservation performance is endurable and steady. Solar E control equipment is adopted together with VFD display and control facilities to realize the automation and intelligence of hot water supply. Packing by carton: water tank and frame in one carton; vacuum tube is lacked in one carton
Die-casting , use the static electricity power spurts plastic
With the latest range of instant water heaters, Alpha offers a host of Innovative features, including a digital temperature display, sensor press temperature selections and fuzzy logic system
With the latest range of instant water heaters, Alpha offers a host of Innovative features, including a digital temperature display, sensor press temperature selections and fuzzy logic system.
Storage Water Heater
Solar water heater Integrated solar water heater series. The tube with special effect has the patent of interferential film technology, thus increasing the heat collection performance is better compared to normal tubes and more stable. Optional: Standard tube; 3-hi tube; Diameter: 47mm/58mm Length:1500mm/1800mm/2000mm/2200mm The support is designed with an overall industrial model, which is simple, direct and stable. Optional: Stainless steel material; Aluminum alloy material Standard export carton
4-burner model, approx. Yield of hot water per hr.-300 ltrs., consumtion of kerosene oil per hr.- 2 ltrs. No electricity required. Running water provided from overhead tank. 6ft * 1.9ft * 1.5ft
