Products model: sc-s01p»G+dåseparate pressurized solar water heaterp»G+GǦ Products intro The separate pressurized solar water heater compose of solar collector, storage tank, controller, working station and installation parts. Working principle: 1) when the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically 2) the circulation pump makes heat-conducting liquid circulate automatically 3) the heat-conducting liquid transfers heat to water by heat exchanger in the water tank 4) in case the temperature of the water tank does not reach tmax, then start the auxiliary heating device 5) if discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically Feature: 1) collector separates with the storage tank. The tank can be put anywhere of the house 2) and the collector can be put on both tilted roof and flat roof 3) module design, arbitrary combination, harmony with the building perfectly 4) intelligent control and automatic operation 5) anti-freeze: no water inside the tubes when it works 6) the system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature 7) multifunction: bathing, washing, domestic heating 8) workable at anytime and enjoyableouter Features of separate pressurized system: * strong hydraulic pressure makes your bathe more comfortable * modularized collector, arbitrary combination * intelligent controlling and multiple functions * arbitrary combination with structure of your beautiful constructions * separate installation conveniently * working with assistant resource * full set of original equipment, the life time will be much longer to ensure better using * material A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy C) bracket: aluminium alloy
Products model: sc-b01p»G+dåsolar collector for balcony systemp»G+GǦ Products intro Sc-b01 Pipeline is made of all red copper and conducted by heat transfer medium liquid To save place and simple to install Suitable for families who can not put vacuum tubes on their roofs Stable and reliable performance Fashionable and beautiful It is harmoniously blended with architecture Environmental protection and energy saving * material A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy C) bracket: aluminium alloy * solar vacuum tube with heat pipe A) size: 58 x 850mm B) qty: 8 / 10 / 12pcs C) hail resistance: diameter 25mm * temperature insulation layer A) 50mm thickness imported polyurethane, machinery overall for keeping same temperatureand high pressure foam B) temperature conservation: 72 hours* capacity: 80 / 100 / 120 liters * max. Pressure bearing: 0.6mpa * iso9001 / ce certificate/en-12975 * 3 years international responsibility for free repairing or exchange due to original quality problems
Products model sc-ip01(integrative pressurized solar water heater) Products intro Material: A) inner water tank: sus304 B) outer water tank: galvanized steel alloy C) bracket: galvanized steel or aluminum alloy Solar vacuum tube with heat pipe: A) size: 58 x 1, 900mm B) qty: 20 / 24/ 30pcs Temperature insulation layer: 50mm thickness imported polyurethane, machinery overall for keeping same temperature And high pressure foam Capacity: 200 / 240/ 300 liters Max. Pressure bearing: 1.2mpa 3 years' international responsibility for free repairing or exchange due to original quality problems
Products intro: Detailed selling lead description A copper coiler with 32 meters length is installed in water storage tank as the heat exchanger. When water flows into the copper coiler, it absorbs the heat from the water in the tank, so it can bear much higher pressure, there will be a strong and more comfortable shower. And, without the tank directly transferring, the water is more clean and healthy. 1) material: A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy or stainless steel C) bracket: galvanized steel or aluminum alloy 2) solar vacuum tube: A) size: 58 x 1, 800mm B) quantity: 20 / 24 / 30pcs C) hail resistance: diameter 25mm 3) temperature insulation layer: A) 50mm imported polyurethane, keep same temperature and high pressure foam B) heat preservation: 72 hours 4) capacity: 200 / 240 / 300 liters 5) tank diameter: 420 / 460mm 6) max. Pressure bearing: 0.6mpa 7) iso9001 / ce certificate/en-12975 8) 3 years' international responsibility for free repairing or exchange due to original Quality problems
Solar water heater Carton
Solar heater for water of 179 liters - dct-470-47-150 usd $550.00 Brand diceno. Water container is suitable for 4 people. Outer tank is made of stainless steel; inner tank is made of aluminum with insulating polyurethane material. Measures of the tank are 1.80 meters of length x 46 cm of diameter. It contains 24 crystal tubes of 46 mm/1.50 meters. Fuse of entrance and exit is 1/2 " Weight of the equipment in operation is 574.20 pounds or (261 kg). Warranty is 5 years by manufacture defects.
Customize solar absorber plate 1.Model no. X-01qt-7/8 2.Welding ultrasonice welding 100% fusion 3.Absorber coating selective balck chrome 4.Riser fin material copper tp2 5.Number of riser 7or 8 risers 6.Optical performance absorption:~95%, emission:~10% Customize notes: 1.Three series black chrome, blue sputtering and anode oxidation for main choices; 2.Usually size:1.5sqm1.65sqm, 2.0sqm2.3sqm, 2.5sqm; 3.Type:u pipe, wall mounted, integrated copper plate are accepted; 4.All are ultrasonic welding with 100% fusion; 5.If customize as your diagram, kind let me know your special need. Foam and carton, with a piece of clean paper on each piece.
High solar-thermal conversion and low heat loss Stable advanced coating up to 380 centigrade Long time warranty to 15 years High level vacuum ensure operation under cold weather Data sheet of solar water heater Material borosilicate glass 3.3 Structure all glass coaxial double-layer tubes Material of coating aln/ain-ss/cu Absorptance 0.94 to 0.96 Emittance 0.04 to 0.06 Vacuum les than 5f-10-4pa Stagnation temperature 270 to 300 centigrade Heat-loss coefficient less than 0.6w/ +o *fª) Bearing hailstone ability hailstone diameter ª¬25mm Pressure-endure ability 1mpa Carton packing standard
1) Inner tank:stainless steel SUS304-0.5mm 2) Vacuum tube:QB-AL-N/AL-47-1500/58-1800 3) Outer tank:painted steel-0.4mm/aluminum-zinc coated steel-0.45mm/stainless steel SUS304 4) insulation:polyurethane 50mm/60mm 5) Frame:coated galvanized steel-1.5mm/stainless steel SUS430-1.5mm 6) Reflector:aluminum component/stainless steel.
2 heat setting power: 450/900w Safety overheat protection Safety tip cut-off protection 1 or 2 hours timer Osillation fuction Soft touch tilting angle adjustable
Solar Syetem Free-energy high pressure stand alone model is a new type of solar water heater which adopts advanced heat pipe and all glass vacuum tube technology. High efficient vacuum tube absorbs heat to the condenser end of itself. Condensor indirectly contacts with water through a copper cap and it boils water by releasing heat gained from vacuum tube. The available size of the tank ranges from 150L to 500L. It has the following features: 1. High pressure storage tangk ( testing pressure = 9bar ) 2. No vent and less heat loss as compared to low pressure model 3. Highly efficient heat pipe technology 4. No water introduced into vacuum tube 5. No sealing rubber is needed and hence no leaking problem 6. Easy plug-in installation 7. Freezing resistance WHOLE PACKAGE we have solar keymark-En12976 certificate whole packaging 21 sets fit in a 20" container 43 sets fit in a 40" container
Free-energy high pressure stand alone model is a new type of solar water heater which adopts advanced heat pipe and all glass vacuum tube technology.High efficient vacuum tube absorbs heat to the condenser end of itself. Condensor indirectly contacts with water through a copper cap and it boils water by releasing heat gained from vacuum tube. The available size of the tank ranges from 150l to 500l. It has the following features: 1. High pressure storage tangk ( testing pressure = 9bar ) 2. No vent and less heat loss as compared to low pressure model 3. Highly efficient heat pipe technology 4. No water introduced into vacuum tube 5. No sealing rubber is needed and hence no leaking problem 6. Easy plug-in installation 7. Freezing resistance Whole package We have solar keymark-en12976 certificate Whole package. 15 sets fit in a 20" container 30 sets fit in a 40" container
Use widely: the series of elegant inhabitation can be widely used in the commercial office building, high-class apartment houses, villas, and many other locations Flexible dressing, easy installation: with the pump, plate heat exchanger, water storage and flow switch inside, the appearance of the unit is more portable and beautiful So you can carry it by normal elevator no large machine This flexible design makes more convenience to install High efficiency and saving energy: using the soft compressors and the advanced high efficiency heat exchanger, the energy wastage is 1/5 of the electrical water heater, and 1/3 of the gas heater The unit can reduce many cost for the users and reclaim the investment during short time Safe and dependable: by suing refrigerant, there is no hidden trouble like common water heaters such as flammable, explosive, getting an electric shock toxic Advanced intellectualized controller and humanistitc water supply system are used to keep the units running at low ambient temperature or high ambient temperature Carton and splint
Energy saving: with the international brands scroll compressor and high quality heat exchangers, save 65 to 80%, operating costs compared with other conventional water heating equipment (oil-fired boiler, gas boiler, electric boilers, and more) Quiet operation: with the high efficiency and low noise scroll compressor and the good quality fan motor Easy installation: small volume, can be carried by normal elevator, no large carrying machine Stable and reliable: with control and protection functions, unit operating in bad condition Environmental protection: units installed ground, central unit in the form of using geography, will not cause environmental pollution Cooling capacity: 40.0 to 162.0kw Heating capacity: 32.0 to 150.0kw Carton and splint
Big quantity hot water Energy saving Cooperate with the other energy Design the system according to your requirements Standard export package
Materials: Inner tank materials: sus304-2b Inner tank thickness: 0.5mm Outer tank: the steel coated with zinc Outer tank thickness: 0.37mm Insulation: polyurethane imported from south korea Insulation thickness: 50-65mm Frame materials: steel coated with the zinc Frame thickness: 1.5mm Advantages: low cost hot water and good heat efficiency. Standard export package
Inner tank: sus 304 Inner tank thickness: 1.2mm Outer tank: sus 304 Outer tank thickness: 0.31 Insulation: polyurethane imported from south korea Insulation thickness: 50-65mm Frame: sus430 Frame thickness: 1.5mm Pressure parameter: 0.6mpa Conducting materials: heat tube Advantages: for the pressured operation, got more rushed hot water while bathing. Even one vacuum tube broken, the whole system can go on working. Standard export package
Commodity Integrative Pressurized Solar Water Heater Vacuum Tube : 47mmX1500mm, 58mmX1800mm Amount of Vacuum Tube: 16 / 18 / 20 / 24 / 30 / 36 Material Inner tank: SUS304 stainless steel Outer tank: Galvanized steel alloy Bracket: Galvanized steel alloy Heat insulation layer: Imported polyurethane Heat pipe: straight copper pipe Thickness Inner tank: 1.2mm Outer tank:0.4mm Bracket::1.5mm Heat insulation layer: 50mm Working Temp 99 Celsius degree Working Press 1.0MPa (10 bars) Coloration as per Accessories Assistant tank and electrical heater Certificate ISO9001:2000, CE Warranty 5 years for full system / 15 years for vacuum tube MOQ negotiation Lead time within 15 days for full container at factory Payment Telegraphic Transfer (T/T), Letter of Credit (L/C)
Inner Tank Material: Stainless Steel Power Source: Solar Features: 1) Water tank capacity: 10L x X tube 2) Heat collector machine size: ª¦58 x 2.0m 3) New vacuum hot tube ª¦58 ó¬1800 mm 4) Inside water chest: imported BS SUS304-2B stainless steel (food class) 5) Outer water shell: A luster resembling plate (colors: white, argentine, gold) or stainless steel 6) Heat insulation layer: 60mm ammonia ester integral foaming, superior heat preservation 7) Grade A material: imported hot zinc steel plate 8) Glint plank angle of elevation: 45/50 9) Water tank diameter: 480mm 10) Falling water collection method.
Commodityregular solar water heater Materialinner tank: imported stainless steel (sus304/2b) Outer tank: galvanized steel alloy Bracket: 1.5mm Heat insulation layer: imported polyurethane (bayer, germany) Thicknessinner tank: 0.4mm Outer tank:0.4mm Bracket: 1.5mm Heat insulation layer: 50mm Working temp.99 celsius degree Working press.0.3mpa (3 bars ) Colorationas per Certificateiso9001:2000, ce Warranty5 years for full system / 15 years for vacuum tube Moq20'gp Lead timewithin 15 days for full container Payment telegraphic transfer (t/t), letter of credit (l/c) Carton
