Features:
1. Operation temperature: 1500? (1600? for short time).
2. Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation.
3. Heavy duty double layer structure with cooling fan. Lower teperature in outside case.
4. Pid automatic control via current limiting phase angle fired the resistor, e.G. Scr(silicon controlled rectifier).
5. Power control with 30 segments programmable.
Descriptions:
Chamber sizeF60x300mm (2.5"x12")
Working temperature1500? (continuous)
Maximum temperature1600?
Temperature control30 steps programmable and pid automatic control
Heating rate0~15?/min (suggestion: =10?)
Temperature accuracy+/-1?
Heating elementMolybdenum disilicide (mosi2)
Working voltageAc 220v, single phase, 60/50 hz (or according to your requirement)
Max. Power4 kw
Net weight70 kgnote: there are different chamber(tube) sizes for your choice.
Features:
1.Max. Energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina
Fiber ceramic insulation.
2.Heavy duty double layer structure with cooling fan. Lower temperature in outside case.
3.Pid automatic control via current limiting phase angle fired the resistor, e.G scr(silicon controlled rectifier)
4. Power control with 30 or 50 segments programmable.
Descriptions
ProductTouch screen atmosphere muffle furnace
Chamber size300x300x500mm (wxhxd)
Max. Temperature1200°c
Working temp.=1100°c (continuous)
Heating rate0-15°c/min (suggestion: 0-10°c/min)
Temp. Control30 or 50 steps programmable and pid automatic control
ThermocoupleK type
Temp. Accuracy+/-1°c
Heating elementFe-cr-al-mo resistance wire
Furnace structureDouble layer steel casing with dual cooling fan
Working voltageAc 208-380v, single phase, 50/60 hz.
(or according to your requirement.)
Payment termT/t in advance
Delivery timeIn 15 days after receiving the payment.
ShipmentBy air, sea, etc.
Packing detailsPacking - plastic paper inside, polyfoam filledwooden case outside
Features
1.Bottom entry sintering furnaces have heating elements evenly distributed around the heating chamber. This provides a much more even heat distribution throughout the muffle and a more consistent firing temp of all units.
2.We use 6 pieces nodiscoloration mosi2 heating elements surrounding the chamber with long lifttime.
3.Multiple programs and multiple firing stages for your choose.
And there is a paperless recorder, you can check the sintered temperature at real time
4.Touch screen operation pannel, real-time temperature display, the dynamic temperature curve.
5.The sagger/crucible is zigzag, it can be stacked.The tray is hollow out,
Bottom of crucible still can be heated.The heating is much more uniform.
Technical parameters
ModelKj-m1700-dl
Chamber size110x110mm
Working temperature1600?
Thermal controlTouch screen interface
Temperature accuracy+/-1 ?
Heating elementHigh purity mosi2
Chamber Alumina ceramic fiber
Max. Power1.8kw
Working powerAc110/220/440v 50/60hz
Dimensions530x530x820mm
Gross weight75kg
Working temperature, dimensions, chamber size can be made according special requirement
Induction Melting Furnace is major steel producing technology using scrap & sponge iron (directly reduced iron) as main raw material. This technology contributes significant steelmaking capacity in secondary steel sector in India and abroad. It has
Air Pollution
Steel scrap comes from various sources and generally has contaminants/coating etc on it. When this scrap is heated contamination/coating etc. disintegrates from steel and comes out either as slag or becomes air borne, thus causing air pollution. The major source of Air Pollution is :
Selection of Technology for Air Pollution Control Device
The following technologies are usually adopted for Air Pollution Control System in Induction Furnace industry:
a. Bag Filter Type System (Dry)
b. Venturi Scrubber Type System (Wet)
About Bag Filter Type System (Dry Process)
Working of Equipment Bag Filter Type System
1. Suction Hood
2. Spark Arrestor:
3. Bag Filtration System :
4. ID Fan:
5. Stack (Chimney):
Advantages:
1. Low Power Consumption
2. Dry System, No water pollution
3. No corrosion of metal except normal wear & tear
4. Suitable for dust pollution which are the major cause of pollution in induction furnace
5. Achieves desired characteristic of treated gases even for high dust load, as
Efficiency of bag filters is very high
6. Low operation & maintenance cost
Control Practices
About Venturi Scrubber Type System (Wet Process)
Working of Equipment Venturi Scrubber Type System
1. Suction Hood:
2. Ducts & Bends:
3. Venturi Scrubber:
4. ID Fan :
5. Stack (Chimney) :
Advantages :
1 Low Floor Area
2 Can handle high temperature gases
3 Suitable for gas pollution such as SO , NO , etc. 2 x
Disadvantages :
1 Higher Power Consumption to achieve desired standards
2 Generates Water Pollution
3 Material of Construction is prone to corrosion hence low life cycle
4 Choking of pipe, Nozzle and duct (near scrubber) due to Wet condition
5 Higher operation & maintenance cost
6 Can remove submicron particle only with very high pressure drop leading to still higher power consumption
7 Material of Construction is prone to corrosion hence low life cycle
8 Choking of pipe, Nozzle and duct (near scrubber) due to Wet condition
9 Higher operation & maintenance cost
10 Can remove submicron particle only with very high pressure drop leading to still higher power consumption.
Ascent offering industrial steam boiler: our range of industrial steam boiler has large furnace volume and free
Board area resulting in efficient combustion.
These industrial steam boilers are designed for continuous operation for long time without stopping for
Maintenance.
We understand the needs of our valuable customers, and hence all the products are finished keeping in mind the
Requirements and specifications of clients.
We are an eminent name, which is engaged in delivering electric boiler to honorable clients. The offered range of electric boilers is made utilizing high grade raw material and modern machinery in strict compliance with the international quality standards. Moreover, the offered range of electric boilers is suitably checked on different characteristics to ensure that flawless products are delivered at customers' premises.
Features:
Fully secure safety mechanism
Alarm system
Durable
Specification:
Electrical boiler portable
Model: esc 4kw
Heater capacity: 4kw
Water capacity: 5liter
Semi automatic steam pressure: 5bar
Steam output: 5kg 0r sufficient for one steam iron
With the support of our multi-talented professionals, we have established ourselves as a leading manufacturer, exporter and supplier of quality-assured steam boiler. We manufactured these offered range of products keeping in mind the varied requirements of different industries. In this regard, we use ultra-grade metal and other required raw material. Adding to that, before finally approving these boilers, they are tested according to different quality parameters set by the industry.
Feature:
Easy maintenance
Cost effective
Smooth finish
High efficiency
Convenient outlets
Specification:
Material used: mild steel, stainless steel
Pressure: high pressure
Fuel: electricity
With an immense experience and a competent team of professionals, we are able to deliver industrial steam boiler. The offered range of industrial steam boilers is manufactured utilizing high grade raw material, sourced from trustworthy vendors of the market. Our proficient quality personnel ensure to check the entire range of industrial steam boilers possesses large furnace volume as well as free board area.
Features:
Efficient combustion
Longer operation time
Less maintenance
Superior efficiency
Specification:
Material used: mild steel, stainless steel
Structure: fire tube
Style: horizontal
Pressure: high pressure
Fuel: multi fuel
Operation Details
Electrode Steam Boilers are designed to give a steady supply of Dry steam under fluctuating loads, is fully
automatic with additional provision for manual operation and generates steam within a very short time of cold
start.
Resistance is developed in between Electrodes to generate heat. In case if TDS is insufficient to develop sufficient
resistance as desired then in that case Non scaling additives are to be added. If water is very hard then in that
case partial Demineralization will be required. Steam capacity will be as per water quality.
SALIENT FEATURES :
High Efficiency 99%
Maintenance Free
Fully Automatic NonIBR
Smokeless so clean & safe
Skid Mounted Easy to install
Only Water & Electrical Connection require to start up
Compact & Clean so it can be install any very
Ascent cooling tower spares
We are the leading manufacturers & suppliers of vivid range of cooling tower spares such as frp fans, pvc fills & motor & gear box etc. We provide right spares for all cooling towers.
Cooling tower spares :
Pvc fills:
The proposed fill for this selection is cross fluted fill. This is a fill made from polyvinyl chloride material. Pvc sheet material and suitable for industrial type water application.
Fans
Fans are selected for smooth, vibration-free operation with fiberglass blades. All blades shall be moment weighted to a single master blade to permit the change-out of individual blades without the need for fan rebalance. Hubs shall be fabricated of hdg steel and assembled with stainless steel hardware
Motors
Motors are designed and manufactured to meet ip55 specifications & suitable for cooling tower application. Motors are designed and routine tested in accordance with applicable industry standards.
Abiding by the ethical norms of the industry, we are engaged manufacturing and supplying rcc (reinforced cement concrete) cooling tower. Available in various specifications as well as in custom-built range, these cooling towers comply with industry set standards. In addition to this, our professionals employ advanced machines and use quality approved material sourced from the authentic vendors of the market.
Backed by the profound experience of the industry, we are engaged in manufacturing and supplying frp cooling tower. While manufacturing these cooling towers, our professionals strictly follow the established norms and standards of the industry. A team of experts examine these cooling towers on different parameters to ensure their flawlessness, before the final dispatch to the customers. Following are some other details of the product offered by us:
Features:
Longer service life
Maintenance free
Corrosion-free
Compact design
Easy portability
Easy to install
Induced draft
Assured performance
Frp construction
Corrosion free, compact, light weight
Steady distribution system
In order to append and respond to the diverse requirements of esteemed clients, we are able to offer industrial cooling towers. The offered range of industrial cooling towers is made utilizing high grade raw material and innovative technology in strict compliance with the international quality norms and standards. Along with this, the offered range of industrial cooling towers is applicable in different renovation or new construction projects.
Electric arc furnace is using electricity as fuel source, and utilizes the arc high temperature produced by electrode and furnace charge to heat and melts the furnace charge. It is widely using in production of normal steel, high quality carbon steel, various alloy steel, stainless, various ferroalloys. It is the key equipment in steel making factories, foundry factories, ferrous alloys making factories and etc.
Characteristic:
1.Smelting temperature is flexible to be controlled, to meet different steel grade production needs.
2.High heat efficiency, atmosphere inside furnace can be controlled.
3.Can remove the phosphorus, sulfur, oxygen and other impurities and improve steel quality.
4.Easy to control the chemical composition of steel, stable and high recovery rate of alloys.
5.Equipment is simple and shorter technological process.
Adoption of new technology:
1.Optimization design
2.Tubular water cooled furnace wall and furnace lid
Eccentric bottom tapping (ebt)
Copper-steel combined electrode arm
3.Cluster type large sectional area water cooled cables
Optimize large current system structure (energy-saving type)
Proportional valves hydraulic system
Basic level (plc) + procedure level ( industrial control computer) control system
Frequency control technique
Network technique
Heating aluminum billet
Billet diameter: 70~500mm
Billet length:3~10m
Temperature: 420~580 degrees
Energy:natural gas, lpg, diesel oil
Design type: single log type and multi log type
Process type: heating treatment
Raw material: wood paper with plastic bag , or wood film, aluminum profile or aluminum panel
Temperature: 150~190 celcius degrees
Maximum profile length: 6.8m
Maximum panel width: 1.2m
All kinds of paper pattern are available
Raw materail :wood paper with plast bag, wood film, aluminum profile or sheet
Temperature:150~190 degrees
Maximum length of profile: 6.8m
Maximum width of panel: 1.2m
Standard packing for shipping
Weight: 11, 000kg
Overall dimension: length 28.5m, width2.3m, height 2.3m
Container: 40"hq*1, 20"gp*1
