Shell types Heat Exchanger are classified into fixed and floating type Heat Exchangers. Fixed type Heat Exchangers are used where there are absolutely no chances for inter mixing of two fluids. In this type, the tube sheets are completely welded to the shell and acted as shell flanges. The Floating type Heat Exchangers has the advantages of removability of tube bundle and access for cleaning both inner and outer side of tubes and shell.
BEU heat exchanger are shell and tube exchangers with tube bundle consisting of 'U' shaped tubes fixed by mechanical rolling to only one tube sheet. This type of heat exchangers is designed and built with removable shell and tube to allow easy maintenance.
SA179 SMLS fin tubes for heat exchanger,air cooler
Base tube material: SA179 SMLS 25mmOD*3mmTHK*5970mmLG
Fin Material: AL1060; OD57.15mm X 10FPIX 0.4 mm THK
Manufacturing Process:
Finned tube is composited with iron-aluminum or copper-aluminum tube rolling out the fin, which feathers are tightness, small heat resistance, good heat transfer performance, high strength, small flow losses, strong corrosion resistant performance, not easy to deformation and a long working lifetime in cold and hot condition,etc.
The fin givescomplete protection to the base tube and is much stronger than the applied type due to work hardening of the fin material during the extrusion process.
Uppertemperature limit: 350�°
Product Description
Extruded Round Air Heating Finned Tubes for Drying Heat Exchangers
Highest quality product
Wider range of products in both geometry and materials
Price saving
Highest Quality Product
The perfect bond between fin and tube improves efficiency in heat transfer and resistance to corrosion resulting in a clean weld fin to tube joint and fully straight fins (no corrugation).
Price Saving
Lower energy consumption, reduced cost of consumables and increased efficiency of the process allow us to offer very competitive prices.
Application
Aftercoolers, air coolers, air heaters, charge air chillers, condensers, convection heaters, electric heaters, evaporators, fluid coolers, gas coolers, heat pipes, hydrogen coolers, industrial tumble dryers, intercoolers, immersion heaters, oil coolers, radiators, refrigeration, solvent recovery and steam to air heat exchangers.
1367 Heat Exchangers Suppliers
Short on time? Let Heat Exchangers sellers contact you.
Product Description
High Frequency Welded Stainless Steel Spiral Fin Tube Extruded Wound Finned Tube Aluminum/ Copper Fins
Finned Tube Aluminum Fins Heat Exchanger Tube Product Description
The spiral fin tube economizer is a newly type heat transfer equipment, consisting of spiral fin tubes to overcome the serious abrasion and short service time.Which consisted of series of spiral finned tubes, the headers of inlet and outlet, bend, frame and other auxiliaries
Structure arrangement: in line/staggered arrangement
Finned Tube Aluminum Fins Heat Exchanger Tube Features
1. The equipment body can be designed into many modules to ensure the long term and stable running.
2. Compact structure which can enlarge the heat exchanging area in order to add the heat transfer area and less leakage.
3. Improve the heat transfer efficiency.
4. Structure arrangement: In line or staggered arrangement.
Finned Tube Aluminum Fins Heat Exchanger Tube Application
Aftercoolers, air coolers, air heaters, charge air chillers, condensers, convection heaters, electric heaters, evaporators, fluid coolers, gas coolers, heat pipes, hydrogen coolers, industrial tumble dryers, intercoolers, immersion heaters, oil coolers, radiators, refrigeration, solvent recovery and steam to air heat exchangers.
Technical parameters
PRODUCT TYPE TUBE MATERIAL FIN MATERIAL TUBE SIZE FIN SIZE
Heat Exchanger Finned Tube Extruded Fin Tube All Kind of Material can be applied Aluminum A1100 15.88~50.8 7~11.5FPI
Fin Height Max 16mmH
L-Foot Fin Tube All Kind of Material can be applied Copper C1100, C1220 12.70~50.8 7~11.5FPI
(Wrap On Type) Fin Height Max 16mmH
G-Fin Tube (Embedded Type) Aluminum A1100, A1050, A1060
High Frequency Welded Finned Tube A179 Carbon Steel Tube Carbon Steel Tube 12.70~160 1.5~7FPI
Stainless Steel Tube Stainless Steel Tube 0.8~3.2mm. Thickness
Alloy Steel Material Alloy Steel Material
Integral Copper & Copper Alloy High Finned Tube C12200, C11000, C70600 C12200, C11000, C70600 15.88~22.23 5~9FPI
Max 12mm. H
Oval Finned Tube Carbon Steel Tube Carbon Steel Tube All Size Available 5~15FPI
Stainless Steel Tube Stainless Steel Tube
Alloy Steel Material Alloy Steel Material
Copper & Copper Alloy Tube Copper & Copper Alloy Tube
Monometallic Fin Tube Low Fin Tube Carbon Steel, stainless steel, titanium, copper, brass, nickel alloy, etc. -- 9.52~40 12, 16, 19 28 FPI, etc.
Turbo-C Tube
Turbo-E Tube
Corrugated Tube All Kind of Material -- 6.35~40 2~9FPI
High Frequency Welded Stainless Steel Spiral Fin Tubes Carbon Steel Spiral Finned Tubes Factory Provided
Description of Spiral Finned Tubes:
The spiral fin steel pipes currently used are mostly wound, high frequency welded and brazed spiral fin steel pipes.
High Frequency Welded Stainless Steel Spiral Fin Tubes Carbon Steel Spiral Finned Tubes Factory Provided
The burning heat was blowed out directly. Used in construction site or small industrial workshop, for temporary heating or drying. Can also b e used in chicken brooding and pig conservation.
DH25PV have a heat exch anger and a chimney, to exhaust tail gas.
2. Tornado serie s(Output heat 66KW or 115KW)
This series have a special fan, can get oxygen from outside through vent and pipe. This can make burning more stable.
3. Mirage series(Output heat 36KW or 53KW or 84KW)
This series have Oxygen fan can get oxygen from outside, and efficient heat exchanger, this can exhaust tail gas, making blow hot airs clean.
Our special design is the air outlet have a baffle in no wind area, make outlet air strong, can blow further through the air-discharge pipe.
Helios using the isolated independent burner, burn oil or gas. Burning chamber is multipass exchange heat, the highest heat effiency, exhaust tail gas the same time.
Our burner using the Riello(Italy brand) burner, more durable.
Feature of the diesel fuel heater :
1. Robust and tough design
2. Function on diesel oil or kerosene
3. Stainless steel combustion chamber with fan cooling
4. Durable external powder coating
5. With flame sensor
6. If no oil , heater will cut off the power
7. Fixed Oil display
8. Cut-off protection,re-plugged in will not work automatically
9. Low pressure atomization,combustion completely
10. Waterproof class IPX4
11. With P.C.panel to smart setting temperature
12. Easy maintenance
13. Ideal for heating warehouses, factories and workshops
7. Applications: Boiler and Heat Exchanger (Wal panel, economizer, reheater, superheater and steam pipeline of boilers), Hydraulic and Petrochemical Purpose, etc.
8. Place of orgin: China
9) e-mail: tubesolution at sina.com
Commercial information:
1. Delivery: 35-55 days ready at mill;
2. MOQ: 15 ton/item tube while no stock raw material;
3. Packing way: As per our export standard with good protection for shipment;
4. Term of payment: T/T or L/C;
5. Delivery port: Shanghai port.
Cmep-ol oil free explosion proof refrigerant recovery machine is specially designed for light hydorcarbon refrigerants, such as r32, r600a and r290, etc.It's suitable for the service of household a/c, fridge and oil extraction.
Product features:
Specially designed for hc refrigerantion(r600/r600a/r290/r32, ect.)
1 hp oil-free dual cylinder high efficiency compressor
Designed strictly according to the standard of exdiiat3
Ul certified explosion-proof motor
Stainless steel design of compressor, condenser, pipes
Compliance with food safety grade material ptfe
Ul certification and patents pending
Long time running sustainingly up to 24 hours
One year warranty
Specification:
Model:cmep-ol
Application refrigerant:r600, r600a, r290, r32, ect.
Compressor:1hp oil-free dual cylinder compressor
Compressor gas displacement:1.25cfm
Recovery rate: ?¤ 71.6kg/h
Voltage:220-240v/50-60hz, 115vac/60hz
High pressure protection:2.5mpa
Ultimate vacuum:0.05inhg
Weight:43kg
Package:
Carton(for single set)/pallet
Cmep-ol oil free explosion proof refrigerant recovery machine is specially designed for light, hydorcarbon refrigerants, such as, r32, r600a and r290, etc.It's suitable for the service of household a/c, fridge and oil extraction.
Product features:,
Specially designed for hc refrigerantion(r600/r600a/r290/r32, ect.)
1 hp oil-free dual cylinder high efficiency compressor
Designed strictly according to the standard of exdiiat3
Ul certified explosion-proof motor
Stainless steel design of compressor, condenser, pipes
Compliance with food safety grade material ptfe
Ul certification and patents pending
Long time running sustainingly up to 24 hours
One year warranty
Specification:
Model:cmep-ol
Application refrigerant:r600, r600a, r290, r32, ect.
Compressor:1hp oil-free dual cylinder compressor
Compressor gas displacement:1.25cfm
Recovery rate: , , 71.6kg/h
Voltage:220-240v/50-60hz115vac/60hz
High pressure protection:2.5mpa
Ultimate vacuum:0.05inhg
Weight:43kg
Package:
Carton(for single set)/pallet
Cooling Tower Fill: CF500-S
Width: 500mm
Length: 1000mm or as your request
Thickness: from 0.28mm to 0.45mm
Profile height: 20mm 30mm or 35mm
Material: Virgin PVC or PP
Application: Used in thermal power plant concrete cooling
1. Introduction
Genuine rubber gaskets ensure tighter seals, longer lifetime and more uptime for gasketed plate heat exchangers.
Our gaskets may contain up to 30% more polymer than other gaskets, which contributes to optimal sealing.
Don't be fooled by gaskets that are slightly thicker - thicker is not better. Incorrect thickness causes inaccurate tightening calculations, which may cause leakage and/or deformation and destruction of the complete plate pack. Their material are available for NBR, EPDM, HNBR, Viton, Viton G, Neoprene gaskets.
2. Packing&Delivery
Package details: standard export plywood case & carton & customizing according to your requirements.
Delivery time: within 10 working days after received the deposit and confirmed all details.
3.Our Advantages:
a. Competent in manufacturing various types plates,such as
Alfa-Lafa,GEA,FUNKE,Sondex,Thermowave, APV,Tranter,and also make plate mould according to customer requirements.
b. High quality products, best services and competitive prices
c. Large stock:We keep some regular models pares in stock, so fast delivery.
d. Technical service: technical consultation, equipment update, capacity expansion scheme, maintenance and cleaning of the equipment.
e. ISO9001&ISO14001: 2008 international quality&environment management standard certification
f. Strict quality control systems, PHE: pressure testing; plates: size measuring, quality checking; gaskets:thickness/length/width measuring.
4. Application
The product range is extremely wide and is used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
1.Introduction
We are, at the same time , hydraulic press machine manufacturer, we make the mould then press the plates. Our plates are made using single-step pressing. This ensures uniform plate strength and thickness over the entire plate, dramatically reducing the risk of fatigue cracking.The correct material quality can make a huge difference to a process. We ensures that the correct material is specified according to its intended use. Plate materials available for 0.5 & 0.6mm 304ss, 316ss, titanium, asmo254, hastelloy c-276, nickel ni201, 904l. More details please contact us directly .
2.Packing&delivery
Package details: standard export plywood case & carton & customizing according to your requirements.
Delivery time: within 10 working days after received the deposit and confirmed all details.
3.Our advantages:
A. Competent in suppling various types plates, and also make plate mould according to customer requirements.
B. High quality products, best services and competitive prices.
C. Large stock: we keep some regular models pares in stock, so fast delivery.
D. Technical service: technical consultation, equipment update, capacity expansion scheme, maintenance and cleaning of the equipment.
E. Iso9001&iso14001: 2008 international quality&environment management standard certification.
F. Strict quality control systems, phe: pressure testing; plates: size measuring, quality checking; gaskets:thickness/length/width measuring.
4. Application?
They are widely used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from hvac, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
1.Introduction
We are, at the same time ,hydraulic press machine manufacturer, we make the mould then press the plates. Our plates are made using single-step pressing. This ensures uniform plate strength and thickness over the entire plate, dramatically reducing the risk of fatigue cracking.The correct material quality can make a huge difference to a process. We ensures that the correct material is specified according to its intended use. Plate materials available for 0.5 & 0.6mm 304SS, 316SS, Titanium, ASMO254, Hastelloy C-276, Nickel Ni201, 904L. More details please contact us directly .
2.Packing&Delivery
Package details: standard export plywood case & carton & customizing according to your requirements.
Delivery time: within 10 working days after received the deposit and confirmed all details.
3.Our Advantages:
a. Competent in suppling various types plates, and also make plate mould according to customer requirements.
b. High quality products, best services and competitive prices.
c. Large stock: We keep some regular models pares in stock, so fast delivery.
d. Technical service: technical consultation, equipment update, capacity expansion scheme, maintenance and cleaning of the equipment.
e. ISO9001&ISO14001: 2008 international quality&environment management standard certification.
f. Strict quality control systems, PHE: pressure testing; plates: size measuring, quality checking; gaskets:thickness/length/width measuring.
4. Application,
They are widely used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
1. Introduction
Genuine rubber gaskets ensure tighter seals, longer lifetime and more uptime for gasketed plate heat exchangers.
Our gaskets may contain up to 30% more polymer than other gaskets, which contributes to optimal sealing.
Don't be fooled by gaskets that are slightly thicker - thicker is not better. Incorrect thickness causes inaccurate tightening calculations, which may cause leakage and/or deformation and destruction of the complete plate pack. Their material are available for NBR, EPDM, HNBR, Viton, Viton G, Neoprene gaskets.
2. Packing&Delivery
Package details: standard export plywood case & carton & customizing according to your requirements.
Delivery time: within 10 working days after received the deposit and confirmed all details.
3.Our Advantages:
a. Competent in manufacturing various types plates,such as
Alfa-Lafa,GEA,FUNKE,Sondex,Thermowave, APV,Tranter,and also make plate mould according to customer requirements.
b. High quality products, best services and competitive prices
c. Large stock:We keep some regular models pares in stock, so fast delivery.
d. Technical service: technical consultation, equipment update, capacity expansion scheme, maintenance and cleaning of the equipment.
e. ISO9001&ISO14001: 2008 international quality&environment management standard certification
f. Strict quality control systems, PHE: pressure testing; plates: size measuring, quality checking; gaskets:thickness/length/width measuring.
4. Application
The product range is extremely wide and is used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation
1. Efficient heat transfer
Gasketed plate-and-frame heat exchangers (GPHEs) provide efficient heat transfer in compact equipment with a small footprint - much smaller and more efficient than shell-and-tube heat exchangers.
Plate heat exchangers are designed to optimize heat transfer, because the corrugated plates provide by far the greatest surface area through which the heat can be drawn from one gas or liquid to the other.The units also have a flexible design and are easy to service and maintain.
2. Types of gasketed plate heat exchangers
Industrial -extremely versatile range of heat exchangers for use in all types of industries
Industrial semi-welded -used in refrigeration when gaskets are not suitable for one of the media and when higher design pressures are needed
WideGap -used for applications involving fibrous liquids, highly viscous fluids, and fluids containing coarse particles
evaporators-tailor-made, rising film plate surface evaporator
condensers -a compact, plate surface vacuum condenser
Material available for 0.5 & 0.6mm 304SS, 316SS, Titanium, ASMO254, Hastelloy C-276, Nickel Ni201, 904L
More details please contact us directly .
3. Packing&Delivery
Package details: standard export plywood case & carton & customizing according to your requirements.
Delivery time: within 10 working days after received the deposit and confirmed all details.
4. Our Advantages:
a. Competent in suppling various types plate heat exchangers, and also make plate mould according to customer requirements.
b. High quality products, best services and competitive prices.
c. Large stock: We keep some regular models pares in stock, so fast delivery.
d. Technical service: technical consultation, equipment update, capacity expansion scheme, maintenance and cleaning of the equipment.
e. ISO9001&ISO14001: 2008 international quality&environment management standard certification
f. Strict quality control systems, PHE: pressure testing; plates: size measuring, quality checking; gaskets:thickness/length/width measuring.
5. Applicationï¼?
They are widely used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
1. Gasketed plate heat exchangers benefits
Precision heat transfer - closer approach temperature, true counter current flow, 80-90% less hold-up volume
Low overall cost - low capital investment, reduced installation costs, limited maintenance and operating costs
Maximum reliability - less fouling, stress, wear and corrosion
Environmentally responsible - minimum energy consumption for maximum process effect, reduced cleaning
Easy to expand capacity - simply add or remove plates on the existing frame
2. Types of gasketed plate heat exchangers
Industrial -extremely versatile range of heat exchangers for use in all types of industries
Industrial semi-welded -used in refrigeration when gaskets are not suitable for one of the media and when higher design pressures are needed
WideGap -used for applications involving fibrous liquids, highly viscous fluids, and fluids containing coarse particles
evaporators-tailor-made, rising film plate surface evaporator
condensers -a compact, plate surface vacuum condenser
Material available for 0.5 & 0.6mm 304SS, 316SS, Titanium, ASMO254, Hastelloy C-276, Nickel Ni201, 904L
More details please contact us directly .
3. Packing&Delivery
Package details: standard export plywood case & carton & customizing according to your requirements.
Delivery time: within 10 working days after received the deposit and confirmed all details.
1367 Heat Exchangers Suppliers
Short on time? Let Heat Exchangers sellers contact you.
