1. It is simple structure, safe, dependable, easy to mount and easy to operate, low vibration, high output; 2. It is widely used for grinding granular materials, such as corn, sorghum, wheat, soybean, etc; 3. Steel plate welded structure; motor and rotor are mounted on same base plate; 4. Pin coupling direct connection driving; all of all rotors pass an accurate dynamic balancing test; 5. Ensure the safe operation door is locked when the machine is in operation 6. The inlet is on top of machine for ease of operation.
1. It is used for grinding raw materials of large and medium livestock and aqua feed mills. It can also be used for grass and pharmacy fine grinding. The granular raw materials, such as corn, sorghum, wheat, beans, etc can be ground; 2. It is derived from the tear circle type hammer mill and efficiency can be improved by 45%-90% compared to universal hammer mill;
1. It is used for grinding raw materials of large and medium livestock and aqua feed mills. It can also be used for grass and pharmacy fine grinding. The granular raw materials, such as corn, sorghum, wheat, beans, etc can be ground; 2. It is derived from the tear circle type hammer mill and efficiency can be improved by 45%-90% compared to universal hammer mill;
1. It is used for grinding raw materials of large and medium livestock and aqua feed mills. It can also be used for grass and pharmacy fine grinding. The granular raw materials, such as corn, sorghum, wheat, beans, etc can be ground; 2. It is derived from the tear circle type hammer mill and efficiency can be improved by 45%-90% compared to universal hammer mill;
1. It is simple structure, safe, dependable, easy to mount and easy to operate, low vibration, high output; 2. It is widely used for grinding granular materials, such as corn, sorghum, wheat, soybean, etc; 3. Steel plate welded structure; motor and rotor are mounted on same base plate; 4. Pin coupling direct connection driving; all of all rotors pass an accurate dynamic balancing test; 5. Ensure the safe operation door is locked when the machine is in operation 6. The inlet is on top of machine for ease of operation.
It can process wheat, corn, rice , maize, beans, millet, oats, buckwheat, herb, tea , sorghum, dry chilli/pepper Low rotating speed, only 19-25 rpm/min, so low temperature , so the flour nutrition and taste such as protein, carotin, vb etc can be kept well . The flour will be more gluten and no need to add any additives. The capacity we have 20kg/h, 30kg/h, 40kg/h, 50kg/h, 60kg/h, 75kg/h and customized production line
Feed Hammer Mill / Feed Hammer Crusher / Hammer Mill for Feed / Feed Flour Mill Hammer Mill Crusher / Hammer Mill Grinder / Grain Grinder / Powder Crusher / Flour Hammer Mill Crusher� / Hammer Type Grinding Mill / Corn Cob Crusher Product Description: Features of hammer mill crusher: 1.� Compact structure, small size, light weight; with steel structure. 2.Safety and reliable: special device to stop the feeding knife accidents. 3.� Support various power devices: electric motor, diesel engine, and tractor. 4.High quality steel Blades, super wear resistant. 5.Adjustable output sizes: accordingly by manual method. 6.Better feeding device: new design feeding roller added before pressing roller. This crushing and mixing machine, set self-priming, crushing, mixing as one, mainly crushing both forestry and agricultural material, brittle and fibrous material. After the raw materials are fully mixed and crushed, the composition ratio is uniform and the nutrition is balanced, Reduce picky eating of poultry and livestock. It is suitable for mixing and crushing of livestock feed such as pigs, cattle, horses, rabbits, chickens, fish, etc. It is applicable to individual farmers, small feed farms, feed companies, grain and oil processing plants, wineries, breweries, chemical plants, pharmaceutical plants, etc. Production line:
Cryogenic Mill with Closed Liquid Nitrogen (LN2) Auto-fill: LPM-01 Overview: The LPM-01 cryogenic mill with closed liquid nitrogen (LN2) auto-fill system is carefully developed by RUISHENBAO® analytical (shanghai) Co., Ltd, which pulverize and mix some soft, temperature-sensitive or high fat content of samples such as candy, chocolate, Soybeans, peanuts and other food samples for sample preparation in laboratory. The grinding jar is continually cooled with liquid nitrogen from the integrated LN2 cooling system before and during the grinding process. Thus the sample is embrittled and volatile components are preserved. The liquid nitrogen circulates through the system and is continually replenished from an auto-fill system in the exact amount which is required to keep the low temperature of user that evenly reach -196 °C depending on the continuously filling time and amount of LN2. Powerful impact vibratory disc mill results in a perfect grinding efficiency. The auto-fill system avoids direct contact with LN2 and makes cryogenic grinding very safe. Its versatility (cryogenic, wet and dry grinding at room temperature) makes the LPM-01 the ideal mill for quantities up to 100-500 mL (depend on feed material). Its typical area of application includes food analysis, plastic product analysis, mineral analysis, medical aid analysis, drug performance testing, and identification of textile components and so on. Features: � Powerful cryogenic grinding by impact and friction from vibratory disc mill, up to 700-1400rpm, continuously adjustable, short grinding time; � 3 different grinding modes (cryogenic, dry or wet at ambient temperature); � Closed LN2 auto-fill system for enhanced safety, avoids any contact of the user with LN2; � Low LN2-consumption; � Clearly structured user interface, one-touch operation, easy controlling,; � Touch-screen programmable controls for cooling and grinding cycles; � High-capacity grinding up to 500mL of hard, medium-hard, soft, brittle, elastic or fibrous samples (max. equivalent of 500g, depend on feed material); � Pneumatic grinding-jar clamping (with air-pressure) for convenient and safe handling: mill only starts if the grinding-jar clamping is correct; � Noise-insulated grinding chamber and especially safe hood locking; Fields of application: Agriculture, chemistry/plastics, construction materials, engineering/electronics, environment/recycling, food, geology/metallurgy, glass/ceramics, medicine/pharmaceuticals. Typical samples include: animal feed, bones, chemical products, food, hair, oil seeds, paper, plant materials, plastics, sewage sludge, soils, tablets, and textiles, waste samples, wood, wool and so on.
Feeding Size: 350 Mm Fineness: 5-20 Mm Capacity: 5-30 T/H Raw Materials: barite, limestone, gypsum, terrazzo, coal, slag, and up to 100 different kinds.
Hammer mill crusher Application Hammer mill crusher is suitable for mid-hard and light erosive Materials, whose pressureresistance strength is no more than 100Mpa and humidity lower than 15%, suchas coal, salt, chalk, gypsum, blocks, lime Stone, etc. Hammer mill crusher Operating Principle The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw Materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammerto small size. There is a screening plate under the rotor, so that Materials with size smaller than the screen mesh will be screened out and others are left tobe further hammered and ground until reach the st and ard size. The size of the final product can be adjusted by changing the screening plate. The gap between therotors and the screening plate can also be adjusted according to different requirement. Hammer Mill Design The major components of hammer mill, shown in the picture, include: - a delivery device is used to introduce the material to be ground into the path of the hammers. A rotor comprised of a series of machined disks mounted on the horizontal shaft performs this task. - free-swinging hammer that is suspended from rods running parallel to the shaft and through the rotor disks. The hammer carries out the function of smashing the ingredients in order to reduce their particle size. - a perforated screen and either gravity- or air-assisted removal of ground product. Acts to screen the particle size of the hammer mill to ensure particles meet a specified maximum mesh size. Feeder Design Materials are introduced into the paths of the hammers by a variable speed vein feeder. This type of feeder can have its motor slaved by a programmable controller to the main drive motor of the hammer mill. The operational speed of the feeder is controlled to maintain optimum amperage loading of the main motor. Screen Design The amount of open area in hammer mills screen determines the particle size and grinding efficiency. The screen must be designed to maintain its integrity and provide the greatest amount of open area. Screen openings (holes) that are aligned in a 60-degree staggered pattern optimize open area while maintaining screen strength. This method will result in a 40 percent open area using 3.2 mm (1/8 inch) holes aligned on 4.8 mm (3/16 inch) centers. Read more: evelyn@cncharcoalmachine.com
We are leading manufacturer and supplier of milling vice at all over india level from last 15 years and now we start our export at world wide.
We are manufacturing different types of vice from last 15 years and distributed it national level but now we start our export at worldwide.
Pruducts Name :MESP-09 End mill Group of Product :Milling Cutter:Indexable End Mill Place of Origin :China Brand Name :HAFFMAN Typ :MESP-09 Material :SC Insert and Holder Diameter :20-40 Category :End mill Coating :TIN Length L :120-160 Nummber of Inserts Z :2 to 4 Cutting length L1 :40-80 Diameter of Shank d :25-40 angle of insert :90° Innnen cooling :upon inqiury length of insert a :9 Typ of inserts :SPMW09T308,SPMT09T308-M Finishing :Yes Rouging :Yes Stock :on Stock
Hammer Mill >> Simple structure >> High reduction ration >> Easy operation and maintenance >> Low investment >> High manganese or high chrome hammers for option >> Suitable for small scale grinding Description Crushing by the collisions between high-speed hammers and materials, the hammer mill were developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries. The hammer mill can be equipped with motor engine or diesel engine as per requirement. Structure The hammer mill is mainly consist of frame, rotor, hammers, and other parts: 1. Feeding chute 2. Impact plate 3. Hammer 4. Rotor disc 5. Shaft 6. Metal trap 7. Hammer rod 8. Screen 9. Discharging port Working Principle 1. Material is fed into the millâ??s chamber typically by gravity. 2. The material is struck by ganged hammers which are attached to a shaft which rotates at a high speed inside the chamber. The materials are crushed or shattered by the repeated hammer impacts, collisions with the walls of the grinding chamber as well as particle on particle impacts. 3. Perforated metal screens, or bar grates covering the discharge opening of the mill retaining coarse materials for further grinding while allowing qualified sized materials to pass through as finished product. Models: 200*500, 300*500, 400*600
PC Hammer Crusher >> Hammer headwork adopt new technology casting, with wear and impact resistance >> Adjusting grain size to meet customers' need >> Seal body structure solved the problems of crushing plant dust pollution and gray body leakage >> The overall design has attractive appearance, compact structure, less easy damaged parts, easy maintainance. The products are upgraded. Description Hammer crusher is a crushing equipment which utilizes impact energy to crush materials . As a primary crusher, the hammer crusher could crush materials directly from maximum 600-1800mm to 25mm and below. It is suitable for crushing all materials of brittle, medium hardness, and compressive strength less than 150Mpa. So the hammer crusher is applicable to crush medium hardness materials in industries of beneficiation, cement, chemical, metallurgy, and so on, such as the secondary and fine crushing of limestone, coal, etc. This equipment can be adjusted to reach various discharged granularity as the customers' requests. Working Principle Hammer crusher mainly consists of frame, rotor, trapezoidal iron plate, bar grate, etc. And the frame consists of the upper part and the lower part. The rotor consists of main shaft, disk,hinge pin and hammers .The bar grate is below the rotor. The motor drives the rotor to rotate at a high speed. When the materials get into the crushing cavity, they are crushed by the rotating hammers, the crushed products which meet the required size can be discharged from the bar grate and become the final products, the products in larger size are brought back for re-crushing until they reach the required size.
This hammer mill has an electric motor and is suitable for corn, soybean, wheat, and grain grinding. Especially suitable for the pulverization of baby pigs, fish feed, poultry, and livestock Feed. It's widely used in animal feed processing, brewing, chemical, and biological industry.
Hammered copper bottles.
Dth hammer.
Spinning mill.
Composite body, vibration damped, air hammer.
