Size is 48mm*40mic*50m or specification as customize. 6 rols a shrink flat pack, 36 rolls a carton
Cyanoacrylate glue. Packed in 0.5 ml and 1.0 ml
It has strong paste, non-toxic, unti- mildew, made of potato, environment friendly product. Can easy mixing and quick dissolve in cold water, suitable for various different kinds of wallpaper. Usage: It requires wall neat clean, dry, no solid, no hole, strong and no dust. First put the powder into percent clean water, churn half minute make sure the powder completely absorb, after three minute then churn. Use the brush to paste mixed glue on finished cutting wallpaper, full of the surrounding, fold and stress two sides five or six minutes so that the paste completely infiltrate the back of paper then it can paste on wall. First should put the wallpaper's top, use drawknife from up and down, from middle to two sides extrude air bubble. Use wet towel take the extra paste out of the surface wallpaper. We offer any kinds of packing to client choice
We provide all types of adhesive . We are in adhesive from last 36 years. According to customer requirement.
Slipping : 0,5 mm Density : 1450 ± 100 kg/m³ Open time : 30 min Application. Temperature : +5 Cº / +35Cº Bonding Strenght : 0,50 N/m² Grouting Appl. Time : 48 hours later. 25 kg kraft stack paper.
DX-920 is single component neutral RTV silicone adhesive. It makes condensation reaction through the moisture in the air, The solidified elastomer has good electrical performance: anti ageing, high and low temperature resistance, insulation, no swelling, and bonding ability to most metal and non-metal materials, and it can be used for the sealing of many kinds of electronic components and electronic products, no pollution to surrounding environment. This product has passed UL fire retarding certification. 300ml/cartridge.
MTB-406 Instant Glue Large is of MTB Istant Glue sery ,here i give the detials as below. 1. Production Character A. A type of insensitive surface and an universal product B. With medium adhesive strength 2.Production Application A. This production is mainly for the materials which are difficult tto adhesive B. It is used on the inactive surface and to stick the materials with many holes and the acid and absorpted materials. For cyanoacrylate glue, our packing is as one piece with 20g, 10pcs in one box , 50 boxes in one carton .And we can do the packing as your designs and requirements
MTB-407 Instant Glue Large is of MTB Istant Glue sery ,here i give the detials as below. 1. Production Character A. A type of impact resisitance and softness product B. With low adhesive strength C. It is an univeersal type. 2. Production Application It is used on the inactive surface and to stick the materials with many holes and the acid and absorpted materials. For cyanoacrylate glue, our packing is as one piece with 20g, 10pcs in one box , 50 boxes in one carton .And we can do the packing as your designs and requirements
MTB-380 Instant Glue Large is of MTB Istant Glue sery ,here i give the detials as below. 1. Production Character A. A type of inpamct resistance and softness product B. With medium adhesive strength C. Has the character of impact asistance,high temperature resistance and spliting resistance and shake resistance 2. The parameter of MTB-380 Instant Glue is as the below chart shown. For Cyanoacrylate Glue,our packing is as one piece with 20g,10pcs in one box ,50 boxes in one carton .And we can do the packing as your designs and requirements
MTB-401 Instant Glue Large is of MTB Istant Glue sery ,here i give the detials as below. 1. Production Character A. A type of insensitive surface and an universal product B. With medium adhesive strength. 2. Production Application A. This production is mainly for the materials which are difficult tto adhesive B. It is used on the inactive surface and to stick the materials with many holes and the acid and absorpted materials. For cyanoacrylate glue, our packing is as one piece with 20g, 10pcs in one box , 50 boxes in one carton .And we can do the packing as your designs and requirements.
MTB-403 Instant Glue Large is of MTB Istant Glue sery ,here i give the detials as below. 1. Production Character A. A type of low ordour and low bloom product B. Has the character of good wetness resistance C. Do not need complicated ventilating system 2. Production Application This production is mainly for the inexact coopreated parts adhesive. For cyanoacrylate glue, our packing is as one piece with 20g, 10pcs in one box , 50 boxes in one carton .And we can do the packing as your designs and requirements.
World-class best quality conveyor belt jointing & maintenance glue, adhesive with hardner. Min 10 set packaging.
The series of LED silicone packaging materials, mainly used in light-emitting diodes ( LED ) package, having a high refractive index and high light transmittance, can increase the LED luminous flux, low viscosity, easy for deaeration, pouring and molding, make LED has better durability and reliability. This series product is a two-component silicone fluid sealant with high refractive index. Mainly used for electronic components of the seal, enhanced electronic device integrity, improve to shocks, shock resistance, improve the internal components, circuit insulation, conducive to device miniaturization, lightweight, avoid element, circuit is directly exposed to the environment, improve the device's waterproof, moisture-proof performance. Features: high light transmittance, high refractive index, fast curing speed, good fluidity, good heat resistance, weather resistance; Typical application: high-power LED light emitting diode package ( lens filler ), large power LED module top molding package, TOP chip, SMD chip, LED package, LED fluorescent powder glue, potting products such as solar panels. 0.5kg/bottle.
Super glue is a single-component cyanoacrylate monomer in the liquid state, capable of extremely rapid polymerization between adherent surfaces, result-ing in extremely strong and structural bonds at room temperature. This instant adhesive will, with only normal surface preparation, bond all materi-als commonly used in the engineering industry, except polyethylene. Polypropylene, teflon, and very porous surfaces, which require special treatment. Application suits for metal, rubber, ceramics, plastic, wood. Appearance colourless transparent liquid Specification : 3 gram/tube,2 tubes /blister card Packing : 288 card/carton Measurement(cm) : 38*36*42 1 container 20 feet 490 cartons 1 container 40 feet 1010 cartons.
Super glue is a single-component cyanoacrylate monomer in the liquid state, capable of extremely rapid polymerization between adherent surfaces, result-ing in extremely strong and structural bonds at room temperature. This instant adhesive will, with only normal surface preparation, bond all materials commonly used in the engineering industry, except polyethylene. Polypropylene, teflon, and very porous surfaces, which require special treatment. To open tube: 1. Unscrew entire nozzle & cap unit. 2. Reverse cap and place pointed end on top of tube. Point tube away from face, Press to puncture. Do not squeeze tube while puncturing. After puncture is made, replace nozzle & cap. 3. Unscrew outer cap only and apply sparingly. Clean tip after each use. Application: Be sure both surfaces are clean and dry. Apply with extreme care. Never spread with fingers. Apply one drop for each 3 cm area. Apply to only one of the surface, Quickly place two surfaces together with slight finger pressure. Bond is completed in seconds, or depending on material in about one minute, leave for 24 hours for strongest bond. Clean away all excess adhesive from container with ties-sue paper. Keep out of reach of children, in cool dry place. Warning: Keep out of reach of children: Adhesive will stick to skin very quickly, when using, be sure it dose not come into contact with fingers, do not try to pull it off. Soak fingers in warm water and work off Nail polish remover may also be used. If adhesive get in eye, wash eye with quantities of plain water, do not try to remove by rubbing or applying solvents, in case of pain or discomfort, consult a doctor. Bond for home uses: For mending dishes and household articles, tables, chairs, bureaus and other articles of furniture, fishing tackle and other sports equipment, or for use on metal, leather or paper. Application suits for metal, rubber, ceramics, plastic, wood. Appearance colorless transparent liquid Specification 3 gram/tube,12 tubes/blister card. Packing 72 card/carton Measurement(cm) 57*28*38 1 container 20 feet 465 cartons 1 container 40 feet 960 cartons G.W/N.W(KG) 11 KG/10 KG Shelf Life 12 months.
8805 is waterbase PU adhesive, for bonding fabrics, rubber, PU, PVC, TPR, EVA, real leather, etc materials. Targeted at the imported high price waterbase adhesive of the market, developing and synthetizing independently waterbase PU adhesive, suitable for both assembly line and handwork.. High solid content, high quality, high viscosity, excellent permeability and anti-skipping performance, good oil-resistance and bonding feeling, strong initial viscous. Environmental protection, non-yellow, non-odor, excellent combine performance, wide application, etc. 20L/can, N.W.: 14KG, G.W.: 15KG.
148K is a water base spray adhesive, it is designed for swivel chair, mattress, high grade hug pillow, fabric, thick leather sofa, folding screen. Excellent bonding performance for those materials, like: foam to foam, foam to PU leather, foam to PVC leather, foam to fabric, foam to wood, fabric to fabric, fabric to wood, pu/pvc leather to wood, etc. Its character is odorless, environmental protection, good weather resistance, good temperature resistance and oil-resistance, non-pulverization. 20L/can, N.M.: 14KG, G.W.: 15KG.
Water base adhesive for vacuum thermoforming is one component water base polyurethane adhesive. Best quality PUD is used and it is totally environmental protection, innocuity, safety and non-odor, etc. It has excellent performance on heat resistant, fast drying, strong initial viscous, endurance bonding strength, and atomization. Suitable for materials such as pvc with MDF, chipboard or wood board etc. in the vacuum thermoforming area. It is widely applied to waterbase vacuum thermoforming products, like vacuum thermoforming door, kitchen cabinet panel, sound box panel, computer desk etc. 20L/can, N.W.: 14KG, G.W.: 15KG.
Application: 1. Lamination of various plastic materials(such as PET, PE, PO, OPP, BOP, PP and CPP etc.) and carpet. 2. Lamination of some special material(such as aluminum foil, aluminized film etc. ) 3. Lamination of various paper to paper/paper to plastic/paper to aluminum foil(aluminized film) etc. 4. It is widely applies in the soft packing factory, for no harm to any animals, it is very popular in the food package industries. And also the food packing factory, color printing factory, printing factory, laminated factory and lampshade factory etc. 20-125KG/Drum(According to customer¡¯s requirement).
Waterbase composite superglue888A/H is made from waterbase copolymers, designed for compositing shoes fabrics and EVA compositing. Improved strong-odor, high volatility, and potential danger, etc. of the solvent coomposite superglue market, we independently develop enviromental friendly waterbase superglue. Absolute environmental protection, innocuity, non-odor, no fire-hidden-danger, excellent water-resistance and heat-resistance, fast crystallized speed, and stronger later force even to break the EVA material, easy operation, huge adhesion with direct rolling, especially for composting of shoes materials, and stability of high-temperature, etc. 20-200L drum.
