Find Verified Glass Ceramics Suppliers, Manufacturers and Wholesalers

FRP-02
Description
This product is widely used in composite suspension long rod insulator, composite post insulator, composite cross-arm insulator, composite drop switch insulator, disconnector, wind deflection of composite insulator, spacer composite insulator, composite insulator for electric railway overhead contact line and other composite insulator industry. The product quality we manufacture for our clients is said to meet IEC 61109 DL/T 810 GB/T 13096-1 GB/T 775.3 JB/T 5892-91 and other related technical requirements.

We specialise on fiber glass products, which include the fiber glass rods, fiber glass tubes, fiber glass sheet as well as various fiber glass profiles like the fiber glassI beam,fiber glass channel,fiberglass angle, etc. Pultrusion process is a kind of method to make continuous composite profiles, which use the twist-less roving on the creel with other continuous reinforced composites, polyester surface mat to proceed the resin impregnation, and then keep the forming mould at certain section, makes the continuous deepening after curing in the intramode. Thus,the pultrusion products come out by this automatic production process. The common products like round rods, round tubes, flat bars, square tubes, angles, U-bars, joist steels,T profiles and other kinds of special profiles.

Characteristic
1). Corrosion resistant, light weight

2). Extremely strong and durable

3). High strength

4). Fire retardant

5). Good insulation

6). Good flexibility, corrosion resistant

Specification
Specification Item
Density 2.1g/cm3
Water Absorption <0.05 %
Tensile Strenth 1200 Mpa
Bending Strenth 900 Mpa
Flexural Strength in thermal state 300 Mpa
Water Diffusion Test (12 KV)1min <1 mA
Dye penetration pass after 15mins

FRP-01
Description
Epoxy Resin Fiberglass rod is adopt glass fiber steeped into epoxy resin pultrusion under high temperatures, which as features light weight,stable mechanical performance,high insulation performance in the range of 10KV to 1000KV.

The tensile strength can up to 1360Mpa

High-temperature rod,Acid-proof rod. This product can be used as the core rod of composite insulator, the vaulting pole of the arresters and the insulant of other high mechanical and electrical appliances.

Insulating Solid Rod is made of ECR glass reinforced epoxy resin.We use continuous pultrusion process .The products comply to the BS standards. Insulator core rods also are also called fiber glass rod, FRP rod, GRP rod, fiber glass bar, Insulation rod, fiber glass stick and so on. It is widely used in the electrical industry, our fiber glass epoxy resin rod products be exported to European Countries like France, Romania, Hungary and United Kingdom, and other countries like Vietnam.

Characteristic
1). Corrosion resistant, lightweight

2). Extremely strong and durable

3). High strength

4). Fire retardant

5). Good insulation

6). Good flexibility, corrosion resisting

Specification
Dimeter of rounded rod: D16, D18, D20, D24, D26, D28, D30, D32, D34, D36, D40, D46, D50,D53, D55, D60, D68, D70, D80, D90, D96, D100, D110, D150 and so on

Length of Round rod: 200mm to 6000mm, itâ??s depend on customer's request.

Also, can open new mould according to customer's demand.

Specification Item
Density 2.1g/cm3
Water Absorption <0.05 %
Tensile Strength 1200 Mpa
Bending Strength 900 Mpa
Flexural Strength in thermal state 300 Mpa
Water Diffusion Test (12 KV)1min <1 mA
Dye penetration pass after 15mins

Application:Polymer insulator/ Arrester/ Cut-out fuse

Technique:Pultrusion

Dimensions: 10-110MM

Material:Epoxy resin and Fiber glass

Color: Any

Type: Common rod, High-temperature rod, Acid-proof rod, Insulation Rod

GRP Gel coated, translucent, high gloss and smooth finish. With mat in its composition. White color. From 1.00 mm to 3.50 mm thick and from 1.6 m to 3.05 m wide. Length up to 60 meters. Other colors available on demand. Can be produced with or without Woven roving. Prices per m², according to composition, thickness, color and finish.

GRP Gel coated, non-slip, high gloss and smooth finish. With mat in its composition. White color. From 1.00 mm to 3.50 mm thick and from 1.6 m to 3.05 m wide. Length up to 60 meters. Other colors available on demand. Can be produced with or without Woven roving. Prices per m², according to composition, thickness, color and finish.

GRP Gel coated, texturized, high gloss and smooth finish. With mat in its composition. White color. From 1.00 mm to 3.50 mm thick and from 1.6 m to 3.05 m wide. Length up to 60 meters. Other colors available on demand. Can be produced with or without Woven roving. Prices per m², according to composition, thickness, color and finish.

GRP Gel coated, high gloss and smooth finish. With mat and white. From 1.00 mm to 3.50 mm thick and from 1.6 m to 3.05 m wide. Length up to 60 meters. Other colors available on demand.

Can be produced with or without Woven roving.

Prices per m2, according to composition, thickness, color and finish.

GRP Gel coated, matte and smooth finish. With mat in its composition. White color. From 1.00 mm to 3.50 mm thick and from 1.6 m to 3.05 m wide. Length up to 60 meters. Other colors available on demand. Can be produced with or without Woven roving. Prices per m², according to composition, thickness, color and finish.

Global Industries FZC is recognised as a reliable and versatile GRPcompany able to supply the highest quality of Fiberglass moulded products. Our team of highly skilled Engineers provide products that are to the exact customer specification, through good design, technical knowledge and a sound practical experience of the compositeindustry.

Stringent quality control and inspection proceedures are adhered to, throughout all stages of production to ensure exceptional quality thatwill not only satisfy but exceed expectations.

We provide our customers with a quality product at an economic price, while offering the highest levels of customer service and back up.It is in this spirit of collaboration that we work towards building longlasting business relationships.

Hot Pressed GRP Sectional Tanks are offered from our principalsin South Korea. These Tanks are approved by WRAS.

Offered products are as follows :

Water Storage Tanks
Sewage Holding Tanks
Fuel Storage Tanks
Chemical Storage Tanks
Cable Joint Boxes
Enclosures & Kiosks
Instrumentation Shades
Sectional Tanks

Sunspa Solutions is a prominent manufacturer specializing in the production of fiberglass reinforced plastic (FRP) swimming pools. With a commitment to quality and innovation, the company utilizes advanced technology and materials to create durable, aesthetically pleasing pools that cater to a variety of customer preferences. Their FRP pools are designed to withstand the elements, offering longevity and minimal maintenance compared to traditional pool materials. Sunspa Solutions also emphasizes customization, allowing clients to choose from a range of designs, sizes, and finishes to suit their specific needs and enhance their outdoor spaces. The company's dedication to customer satisfaction and sustainable practices further solidifies its reputation as a leader in the swimming pool manufacturing industry.

FRP Equipment

FRP EQUIPMENT

Fiber-Reinforced Plastic (FRP) equipment includes corrosion-resistant tanks, pipes, and Cooling Towers used in chemical processing, water treatment, and industrial applications. FRP offers high strength-to-weight ratios and superior corrosion resistance to steel.

If you would like more information about this product, please feel free to contact us. Recommend other popular products for you.: FRP Equipment Manufacturer

18455kgs of Fiberglass
E GLASS DIRECT ROVING

Ref: E6DR17-2400-386T for 9 289kgs
+ Ref: E6DR24-4800-386H for 9 166kgs

TAKE ALL - 20 pallets (25m3) - 18 000 $
EXW FRANCE (59)

Roving Direct is a single strand fiberglass filament yarn wound directly onto a spool without twisting.
directly onto a spool without twisting. The term "E Glass" refers to the composition of the glass, which is a type of silica-based glass containing boron oxide boron oxide, aluminium oxide and other oxides. E Glass Direct Roving is mainly used as a reinforcement in polyester or epoxy resin composites to increase their mechanical strength stiffness and durability. It is also used in the manufacture of fibreglass products such as boats, storage tanks, swimming pools body panels and reinforcement parts for construction.

The hollow fiber ultrafiltration membrane we offer adopts modified PVDF as raw material. The PVDF is processed with hydrophilization treatment; our HF membrane for ultrafiltration has higher water flux and better antifouling property. MEMFILL has various types of membrane which has different molecular weight cut off (MWCO) up to ~100,000 Dalton; Our product can be used for the removal of microorganism, colloids, algae and other impurities that may cause turbidity

Good anti-fouling performance, high water flux, stable permeate water production, long service life;
Outside-in filtration or Inside out type is possible, it can stand bad water quality condition
Combined air and water backwash together, high flux recovery rate, so easy to clean
Excellent chemical stability and high antioxidant ability
Low-pressure operation; save electricity and energy. Operation pressure 0.30 MPa

The hollow fiber ultrafiltration membrane we offer adopts modified PES as basic raw material. The PES is processed with hydrophilization treatment; our hollow fiber membrane for ultrafiltration has higher water flux and better antifouling property. MEMFILL has various types of membrane which has different molecular weight cut off (MWCO) up to ~ 100,000 Dalton; our product can be used for the removal of microorganism, colloids, algae and other impurities that may cause turbidity

Suitable commercial cartridge with high performance
Higher output flux with low pressure operation
Easy to clean with low cost operation
As a pre-filter which is highly suitable for commercial RO plant
Easy back wash process
Permeate rate is from 100 to 200 LPH

We manufacture a complete range of laboratory condensers designed for distillation, reflux, and solvent recovery applications as a trusted laboratory glassware manufacturer and reliable scientific glassware exporters.

Our range includes:

Liebig condensers
Allihn condensers
Graham condensers
Dimroth condensers
Coil condensers
Air condensers
Industrial condensers
Features:

Uniform inner tube design
Leak-proof water connections
High cooling efficiency
Strong joint finishing
Custom lengths & joint sizes
Export quality packaging available from trusted scientific glassware exporters.

Model No
Finishes
Material






F-009

Model No
Finishes
Material






F-008

Model No
Finishes
Material






F-007