Highly Stable & Accurate.
16 Character X 2 Lines Alphanumeric LCD.
30 mm flat bottom Test Tube.
0 to 1000 NTU
Automatic Range Selection.
Higher durability and long life.
Tested on quality parameters.
1000 Samples Storage with Date &Time.
Measurement of Temp. and Turbidity.
Technical Specifications:-
Model
S- 966
Turbidity
Range
0-1000 NTU
Resolution
1.0 NTU in lowest Range
Range Selection
Automatic
Accuracy
+3%, FS+1 -digit
Detector
Photodiode
Sample System
30mm Clear Glass Test Tube
Light Source
3.6 V/ 100ma LED
Calibration
Manual
Temperature
Range
0C to +100C
Resolution
0.1c
Accuracy
+0.2%
Input Type
Pt 100
Calibration
Auto/Manual
Display
16 Character X 2 Lines Alphanumeric LCD
Display Format
Temp &Turbidity Simultaneously
Setting
By Soft Touch Keys
Storage
1000 Samples With Date & Time
PC Interface
RS-232
Real Time Display
24 Hour Mode With Date
Power Supply
230 V +-10% Ac 50 Hz Dimension 198x238x103mm
Digital Flame Photometer S-931Â manufactured by us boast of top-notch quality. Supreme quality raw materials and properly updated technology is utilized for manufacturing them. Durability, longevity, strength, perfect designs are their highlights. Our top notch quality experts, R&D team and engineers, are responsible for developing products, with the latest trend in sight.
 Instrument with Na & K Filters
Sample Holders
Instruction Manual
Dust Cover
Main Lead
Air and Gas Tubing along with end Damps
Capacity Tubes
Chimney
Cleaning Wires
Drain Pipe
Air Compressor
Inner Tank & Outer body made of Stainless Steel.
Digital Control.
RED LED display.
Heating Temperature RT+5 ~ 80 C.
Temperature with timer function.
Drainage and cool fan available in 6L to 24L.
LID & Basket as Standard Supply.
TECHNICAL SPECIFICATIONS :
Tank Capacity (Approx.) Â 8L Â 24L
Tank Size (mm) 240x140x100 300 155 150 300 240x150 330 300 150 500 300 200
Ultrasonic Power  100W  150W  200W 300W  500W
Heating power  100W  300W  300W   400W  500W
Tank Drain Drain Valve
Time Setting  1-99 min.
Heating Temp. Â RT. +5 ~ 80 C
Display Digital  RED LED
Frequency 40kHz
Lid Material &a Inner Tank Material  SS 304
Outer Tank Material SS 201
Power Supply AC 220V / 50 Hz
Weight (approx.) 7.5 kg  9 kg  12 kg  17 kg
25266 Glass Ceramics Suppliers
Short on time? Let Glass Ceramics sellers contact you.
Made of Complete SS 304 GMP Model.Down flowing Minipleat HEPA filttered air with 99.999% down to 0.3 �¼ guarantees sample protection. Ideal for applications in microbiology, biotechnology, foresic, research labs, hospitals etc.
Features
Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
Cabinet is fabricated of SS 304
Working table is made of Stainless Steel Sheet (SS-304 grade).
Front door is made out of thick transparent plexiglass.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters having an efficiency rating.
Heavy Duty Motor operates with a minimum noise level.
Using a dynamic machine, the blower and motor assembly are statically & dynamically balanced.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with S.S. Table Top, Transparent front door, Static Pressure Manometer, Built-in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
With Solid Side Walls and transparent front door.
To work on 220/230 volts A.C. supply.
Technical specifications
Purity: Confirming to class 100 conditions
Main filter: HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter: Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Illumination: Fluorescent Lamp 40W
Sterilizing: UV Germicidal Tube.
Utility: Gas/Air cock
Supply Voltage & Frequency: AC 230V, 50/60 Hz
Horizontal Laminar complete SS 304 GMP model.Provides a horizontal air flow parallel to work table with proven protection to the sample and processes with H-14 Minipleat HEPA Filters with 99.999% efficiency down to 0.3.
Features
Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
Cabinet is fabricated of stainless steel (SS-304grade)
Working table is made of Stainless Steel Sheet (SS-304 grade).
Front doors are made out of thick transparent plexiglass.
Heavy Duty Motor operates with a minimum noise level.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with S.S. Satin finish Table Top, Transparent front door, Static Pressure Manometer, Built-in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
With Solid Side Walls and transparent front door.
To work on 220/230 volts A.C. supply.
Technical specifications
Main filter: HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3. These filters are designed to accommodate higher air flow volume.
Prefilter: Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Illumination: Fluorescent Lamp 40W
Sterilizing: UV Germicidal Tube.
Front door: Made of Plexi Glass
Utility: Gas/Air cock
Supply Voltage & Frequency : AC 230V, 50/60 Hz
Work Table: Stainless Steel (SS-304 grade)
These totally exhaust system are designed for 100% exhaust of HEPA filtered air outside the room through a exhaust duct protects user product as well as the laboratory. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
Features
100 % air exhaust
Negative pressure air surrounding all biological contaminated parts
Class II, Type B2 cabinets are total exhaust cabinets, widely used in toxicology laboratories and similar applications where chemical effluent is present and clean air is essential.
There is no recirculation within the work area.
Room air enters through a blower/motor in the top of the cabinet and passes through a HEPA supply filter into the work area as the vertical unidirectional airflow.
Descending air is pulled through the base of the cabinet through the perforated front and rear grilles.
Simultaneously, air entering through the perforated front opening is pulled through the grille and exhausted immediately,
100% of the air is pulled into the facility exhaust system for appropriate treatment.
Type B2 cabinet is hard-connected to an exhaust system.
Negative pressure surrounds the work area with double-wall plenums for protection.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on the air leaving side; conforms to EU-4 /G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
Aerodynamic airflow grills maintain safety and prevents blockage.
U.V and fluorescent interlock available
Ergonomic and comfortable sloped front window for comfortable head and elbow rest position, thus reducing fatigue
Sash is counterbalanced for smooth and lightweight operation with a standard opening for easier access to the work zone and enhanced user safety.
CLASS-II design ensures PERSONNEL, PRODUCT and ENVIRONMENT PROTECTION.
Class II Biosafety Cabinet Protection
Personnel protection from harmful agents used inside the biosafety cabinet.
Product protection to avoid contamination of the works, experiment or process from outside contaminants.
Environmental protection from contaminants contained within the biosafety cabinet.
Class II Biosafety Cabinet Key Features
A front access opening with carefully maintained inward airflow.
HEPA-filtered, vertical, unidirectional airflow within the work area.
HEPA-filtered exhaust air to the
PRODUCT DESCRIPTION
Filter Funnels with Long Stem
Manufactured from 3.3 Low Expansion Borosilicate glassÂ
Funnel is constructed with heavy uniform walls, molded rims, and fire-polished stems to give a long service life
Product code: 991
Minimum Price(USD): 0.88
Maximum Price(USD): 6
PRODUCT DESCRIPTION
Viscometers Suspended Level with Constant Certification & Calibrated @ 40C
Autoclavable Made from 3.3 Borosilicat Glass
For measurement of kinematic viscosity of transparent Newtonian liquids according to ASTM
D 445 and ISO 3104. Specifications conform to ASTM D 446� and ISO 3105.
Minimum sample volume 11� ml .
Comes with a certificate of constant
Flasks, Round Bottom, Short/Medium Neck with I/C Joint
Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass
Uniform wall thickness & round shape for ideal heating comes with an interchangeable joint
Product code: 891
Minimum Price(USD): 2
Maximum Price(USD): 57
PRODUCT DESCRIPTION
Condensers, Leibig with I /C joint
Water-jacketed condenser suitable for distillation and reflux applications
Comes with Interchangeable cone & socket joints
Made from Heat Resistant Low Expansion 3.3 Borosilicate Glass
Separating Funnels with Glass Stop Cock, Pear Shape
Autoclavable, Made from 3.3 borosilicate glassÂ
Comes with standared glass stop cock & solid glsss stopper
PRODUCT DESCRIPTION
Petri Dishes PlainÂ
Autoclavable, Made fron 3.3 borosilicate glass
Withstand repeated sterilization (wet or dry)
The edges are beaded to provide greater mechanical strength
Pipettes, Measuring Serological  Class A, Accuracy as per USP/ASTM E-1044
Calibration @20
Manufactured from specially selecte heavy wall machine drawn Borosilicate 3.3 accurate
bore glass tubing glass
They have precision forced jets and beval ground ends to resis chipping
All of the pipeties are individually measured and then markedÂ
The graduation marks are in durable amber stain
Each pipettewith Unique Serial number & individual work certificate
Volumetric Pipette Class A USP / ASTM 1ml to 100ml
PRODUCT DESCRIPTION
Volumetric Pipettes, Transfer, Class A, Accuracy as per USP(ASTM E-969.Calibration @20 C
Manufactured from specially selected, heavy wall machine drawn� Borosilicate 3.3 accurate
bore glass tubing
They have precision forced jets and beval ground ends to resis chipping
All of the pipeties are individually measured and then markedÃ?Â
Each pipette with Unique Serial number & Individual work certificate
Volumetric Flask Amber Colour Class A USP 5ml to 2000ml
PRODUCT DESCRIPTION
Volumetric Flask Amber colour with PE Stopper, Class A, Accuracy as per USP(US pharmacopoeia ) & Calibration @20 C
Manufactured from 3.3 Low Expansion Borosilicate Amber glassÂ
Comes with Penny Head Sollid Glass Stopper
5 to 20ml Supplied with TRAPEZOIDAL shape for better Stability.
Each flask with Unique serial number & an Individual work Certificate
Volumetric Flask Flask with I/C Glass Stopper, Class A, Accuracy as per USP(US
pharmacopoeia ) & alibration @20 CManufactured from 3.3 Low Expansion Borosilicate Amber glass
Comes with Penny Head Solid Glass Stopper
5 to 20ml Supplied with TRAPEZOIDAL shape for better Stability.
Each flask with Unique serial number & Individual work Certificate
Cylinder Graduated Hexagonal Base Class A ASTM 5ml to 2000ml
PRODUCT DESCRIPTION
Cylinder Graduated Single Metric Scale with pour our, Class, Acuuracy as per
ASTME Calibrated @20
Comes with Hexagonal base
Manufactured from 3.3 low Expansion BorosilicateÂ
Graduation in permanent Amber colour
With Uique serial number & individual work certificate
Product code: 204
Minimum Price(USD): 6
Maximum Price(USD): 49
25266 Glass Ceramics Suppliers
Short on time? Let Glass Ceramics sellers contact you.
