Protective film - peel off BOTH-SIDED PROTECTIVE FILM before use to get a 100% clear view Visor officially tested, certified and approved. Medical protective product, high wearing comfort for long wearing times Panoramic visor - high protection for you, your employees and loved ones from flying droplets such as saliva, sneezers etc. Shield covers entire face including sides and offers reliable protection Faceshield offers enough space for glasses and protective mask Flexible stretch band adapts to any head size without pressing - even after hours MADE IN GERMANY - made by hand in Germany. Dimensions Adults 33 x 20 cm
Children Medical Mask
Hard woods and soft woods.
Medical mask, mask, protection face shields.Manufacture
Paper products like scrap & rejected lot & over issued & side run, gummed & un gummed paper, digital fine papers, silicon release paper, metalized paper, silver & gold paper, alu laminated paper, thermal paper reels, color paper & board, greaseproof paper & parchment white and colored, decor laminate, base paper, gloss label paper, tetra printed board, self adhesive label stock, art semi gloss & high gloss paper, wood free uncoated paper, playing card board & black centre triplex board, tracing white & color paper, aluminium pe triplex & duplex foil, pe coated paper, wallpaper, leather release paper, pp, polyester non woven, fleece, aluminium foil, insulation kraft paper, tyvek paper, plastic products like polyester & pet film in reels, bopp film in reels, pvc soft & rigid film in reels & sheet, ldpe film in reels, hot stamping foil, pvc vinyl and self adhesive vinyl & flex in reels(color & white), polycarbonate (pc), shrink and strech film, pmma, pvc, pp, ld, hdpe.
Tapioca products such as tapioca hard pellets (thp), tapioca residue pellets (trp) and tapioca chips (tpc).
Grade A %100 Pure, Oil content 42.00% min. Purity 98.00 % min. Acid content 2.00 % max. Foreing bodies 2.00 % max. Moisture 4.1 g
Human or feed corn (yellow & white) both gmo and non gmo, soybeans (grade i or ii) gmo and non gmo , soybean meal (grade i or ii) gmo and non gmo, wheat (durum / hard and soft), sugar (icumsa 45 and icumsa 600 1200).Importing, exporting
Protect your car paint from bird drops, scratches, stone chips, iron powder and UV Enjoy the deep gloss shine that no other product can match Good for two cars, also can be applied to motorcycles. Higher hardness levels with flexibility. Long life protection that lasts up to 5 years.
Introduction： The TP-serie are machines describing fully automatic vision SMT pick and place machines, which can mount a variety of components through the vacuum nozzle. The TP66V is suitable for most of the SMD components such as 0402, SOICs, PLCCs and QFP ICs. With the vision position system it is able to mount 0.5mm of QFP ICs or BGAs. Beside the standard circle reference point, also a square point, which is not the PCB solder paste screen printing pad ring perforated pad, can be chosen as a reference point. Features: 1. Using imported precision square rail, effectively improve the placement accuracy. 2. Using an unique high-definition optical prism industrial camera to complete mount high-precision components. 3. With the vision position system, it can automatically identify the MARK point to improve effectively your SMT production efficiency and placement accuracy. 4. Automatic visual programming. There is no need of a manual input the coordinates of components. 5. Standard configuration of automatic nozzle replacement system. 6. Able to configure a variety of different feeders to meet your needed requirements for mounting. 7. Easy to input CAD data of the PCB. 8. The software can display all PCB coordinates, which you can adjust by fine tuning some of the coordinates to assure a high precision placement. Standard Configuration: 1. Industrial Computer: 1 piece 2. Mounting head: 1 groups 3. Nozzles: 9 pcs 4. GFTA-48 feeder table: 2 sets 5. MARK cameras: 2 sets 6. QFP high precision industrial camera: 1set 7. QFP high clear light source: 2 set Optional: 1. Automatic feeder: 8mm, 12mm, 16mm and 24mm 2. IC Disc Feeder（GFQN） 3. Components bulk disk（GFSN） 4. Nozzles 5. AQ38 end mirror system（25MM-38MM QFP） 6. AQ45 end mirror system（38MM-45MM QFP） 7. Industrial air pump Technical Parameter: Mounting head: 2 units - 12 heads Max size of PCB: 1500 x 316mm Min width of PCB: 40mm Max moving range: 670 x 620mm Max thickness of components: 15mm Typical speed: 14.000 - 17.000cph Max speed: 32.000cph X, Y-axis precision: 0.002mm Mounting precision: +/- 0.03mm Available components: > 0402 and < 38mm pitch; > 0.5mm IC Positioning: Visual positioning Program method: Automatic data import/ video learning/ keyboard input Transmission: X, Y-axis high precision ball screw with precision guide rail Tape feeder: Optional 8mm, 12mm, 16mm, 24mm, 32mm, 44mm Number of Feeders: Possibility of 96 feeders of 8mm GFTA-08S feeder, 48 feeders for the front and 48 for the back side. Number of IC feeder: Max 2 pcs Operation system: Windows XP Compressed air: 80psi (0.5Mpa - 0.7Mpa) Power supply: 220V, 50Hz, 5kW Weight: 14000kg Dimension: 1650 x 1485 x 1400mm
Specifications: Icumsa:45 rbu Solubility:100% free flowing Polarization:99,80% min. Moisture:0,04% max. Ash:0,04% max. Granulation: fine to medium Colour: sparkling cristal white Magnetic particles: mg/k 4 So: mg/k 20 Radiation: normal without presence of cesium or iodine Packing:50kg polypropylene bags. Procedures 1- buyer's issues fresh *loi/icpo (sellers format) + blc (top 25 world banks) + ncnd signed *loi/icpo shall be in letterhead, signed, stamped fresh dated, no more than 4 days. 2- seller's issues fco and buyer's sign & seals and return it to seller's within 3 calendar days. 3- seller's send draft contract. 4- buyer's reviews draft contract and makes necessary amendments in the contract and return it together with complete bank coordinates, copy of buyers company registration certificate and passport copy to the person authorised to sign in behalf of the buyer. Draft must be returned in 5 calendar days 5- within 3 banking days buyer's bank must advise pof to seller's bank. 6- hard copies of the contract will be changed between seller and buyer. 7- buyers sign & seal all the hard copies and return it to seller within 3 calendar days 8- selle's bank issue pop to buyer's bank. Within 3 banking days of being advise the pop, buyer's bank will issue to seller's bank the non-operative letter of credit. 9- seller's bank will issue 2%pb 10-delivery 30/45 days. Please note: Non negotiable conditions: we don't send advance pop, fco, no more than 2%pb, no old bl, no samples, no payment after arrival at destination port.
Suitable for disinfection of indoor surfaces, hard furniture, dishes, kitchen equipment and utensils, linen, dishwashing items, patient care items, personal hygiene products, as a household and industrial bleach and disinfectant, cleaning agent, water disinfection and quality improvement by turbidity and color. It is used for disinfection of garbage disposal systems (garbage collection equipment, inventory, garbage bins, garbage trucks
We offer a special chemical disinfectant for cleaning the runway Scope: Companies for the processing of food raw materials, road, rail and air transport, utilities, trade and leisure, households in the purpose of "KSM-A" - for the removal of organic, including blood and traces of rubber, and minerals, including iron oxide, deposits of surfaces of Plumbing and technological equipment, industrial buildings, including surfaces lined with ceramic tiles, during ongoing and general cleaning. Properties: Strong foaming agent. It is used for cleaning with both a manual cleaning method and using foam generating equipment. High emulsifying power against organic pollution. Effectively dissolves water hardness salts and rust. If you have any questions or are unclear, please contact us
Scope: Enterprises for the processing of food raw materials, road, rail and air transport, utilities, trade and recreation, households in KSM-A purpose to remove organic, including blood and traces of rubber, and mineral, including iron oxide, deposits from the surfaces of plumbing and technological equipment, industrial premises, including surfaces lined with ceramic tiles, during the current and general cleaning. Properties: High-foamy agent. It is used for cleaning both with a manual method of cleaning and with the use of foam generating equipment. High emulsifying ability to organic pollution. Effectively dissolves water hardness salts and rust.
Orthopedic mattress 140x190 "extra relax" orthopedic, total thickness 14 cm waterfoam foam, removable and washable cover Quantity: 500 Price: 57,99 â?¬ density: 30 kg / m3, H2 (medium rigidity), foam (waterfoam 2.0) "super comfort", perfect mattress for all demands of rest and weight. ORTHOPEDIC MATTRESS: Hardness: medium - optimal comfort, the shape of the mattress allows for air circulation as well as for a correct ventilation inside the mattress. Lining: Microfiber 100% polyester, the lining covering the mattress is easily removable. It is possible to wash it several times. The mattress is guaranteed for 15 years. All materials are guaranteed and have Ã?KO-TEX Standard 100 certification (trust in textiles) density: 30 kg/m3, H2 (medium rigidity), foam (waterfoam 2.0) "super comfort", perfect mattress for all needs of rest and weights
Beech Firewood/Wood logs Cleaved We are trading with hard firewood on pallets. It can be either fresh or dry up to 20%. Available species: Ash, Beech, Birch, Oak. Best quality kiln-dried Alder firewood packed in 2m3 crates. Kiln-dried firewood Our company is the manufacturer of firewood and other bio-energy products like wood pellets, briquettes, wood charcoal. Kiln Dried Firewood for Sale, Oak, and Beech Firewood Logs - Hornbeam Firewood - For Firewood - Ash Firewood - Alder Firewood - Oak Firewood - Birch Firewood - Spruce Firewood - Beech Firewood - Dried Kiln Firewood - Dried Robber wood - Dried Eucalyptus wood. Measures outside: 1.2 m * 0.8 m * 2.0 m. Split length: 25-100 cm width of the split: 8-16cm Wood fire size: 25cm, 33 cm or 50 cm; The thickness of wood is 5-15 cm. Fire wood diameter 7 - 19 cm; Moisture Content: < 20% Ash Content (db): < 0.5% Abrasion: 2.0% Calorific Value: > 4500kcal/kg Diameter: 5cm to 15cm Length: 20cm to 50mm Burn Value: 90-95% Humidity: 12%; 1 pallet=1 Ton 28 pallet= 1 Truck Our prices are very cheap as compared to other suppliers and our wood will be the best for the winter period. We have the capacity to supply large quantity orders and we will be looking forward to establishing a long-term business relationship with any Interested company. punctuality as to the delivery of our product has made us one of the top-ranking competitors in the world. We are looking for new business partners. We are ready to offer fresh cut mix, ash, and oak firewood on 1m3,2m3 pallets and netted bags. Also, mix dry kiln firewood. For March we had 4 loads available. We are ready to offer also kindlings. PM me for details if interested.
Sawn tropical hardwood timber, teak and other plantation species and tropical hard wood roundlogs.
Lithium, spices, grains, nuts, oil seeds, oils cosmetics & hard commodities, sesame, cashew, cashew nut, cashew oil, maize/corn, etc.
We offer a wide range of bags from backpacks to sling bags and more to suit your needs. These give you required storage space and freedom of movement to easily carry your laptop, documents, hard drives, laptop accessories like chargers, mouse and much more. SIZES 13.3 Inch (13.3*10) 14 Inch (13.6*10) 15.6 Inch (15.6*11) 17 Inch (16.8*11.8)
9.1 Seller issues draft contract and draft Irrevocable Corporate Purchase Order (ICPO), open for amendments, to Buyer for procedure verification and acceptance. 9.2 Seller signs and seals the Sales Purchase Agreement (SPA) the â??Contractâ?� and emails to the buyer for signature and endorsement. 9.3 Buyer countersigns the contract and dispatches a copy to the Seller with ICPO. Buyer shall return copy of the signed Contract Agreement with Buyerâ??s Port of Discharge (POD)/NOR draft. 9.4 Seller loads vessel and sends to buyer full soft copies of cargo documents in buyerâ??s/ seller's name. Sellerâ??s loaded vessel shall issue a Marine Notice of Readiness (NOR) to the buyerâ??s port of discharge. 9.5 On receipt of NOR from Sellerâ??s loaded vessel, Buyerâ??s bank will issue ICPO to the Sellerâ??s bank. 9.6 On receipt and confirmation of ICPO at Sellerâ??s bank, Sellerâ??s loaded vessel shall sail to buyer's POD. Upon arrival of the vessel to buyerâ??s discharge port, Buyer shall be responsible for clearance of vessel to POD, and within 24-36 hours, Sellerâ??s vessel issues ATB (Authority to Board) to buyerâ??s inspectors to board the vessel to conduct Q&Q at buyerâ??s expense. Q&Q inspection and report must be based on the established procedures of the port of discharge. 9.7 Upon a successful Q&Q, Buyerâ??s inspectors release inspection report with copies to the seller. 9.8 Seller issues commercial invoice to buyer. The invoice shall be based on the Q&Q certificate. Seller also issues hard copy of documents to buyer. Documents (total original and Copies) will be sent to the buyer directly, or appointed bank by buyer for the payment. 9.9 Within 3 days from the date of the Q&Q Certificate, buyer pays to Sellerâ??s and agentâ??s account for the cargo via MT103). Vessel discharge to buyerâ??s tank. 9.10 Steps 9.4 to 9.9 is repeated for the next shipment.
