Model FZK8810A QY-EWQ-01 Measurement Method Non-contact type Power Supply Prompt for low battery charge DC 3V(2 AAA batteries) Measuring Range 32-42.5 33~43.0 Electricity Prompt Prompt for low battery charge Measure Distance 1cm-15cm 3~5cm Fever Alarm Abnormal body temperature alarm 5 beeps in case of the temperature is higher 38 Measuring Time Measurement time:0.6 second Maximum Error ±0.2 0.2~0.3 Display Unit Centigrade() Display Resolution 0.1 0.2~0.3 Automatic Shutdown 15 seconds 20 seconds Operating Environment 10-40, Humidity 85% Specification Size 7cm*5cm*19cm 15.5*8.77*4.4cm Transportation And Storage Environment -20 -55,Humidity 85%
Model FZK8810A QY-EWQ-01 Measurement Method Non-contact type Power Supply Prompt for low battery charge DC 3V(2 AAA batteries) Measuring Range 32 42.5 33~43.0 Electricity Prompt Prompt for low battery charge Measure Distance 1cm-15cm 3~5cm Fever Alarm Abnormal body temperature alarm 5 beeps in case of the temperature is higher 38 Measuring Time Measurement time:0.6 second Maximum Error 0.2 0.2 ~0.3 Display Unit Centigrade( ) Display Resolution 0.1 0.2 Automatic Shutdown 15 seconds 20 seconds Operating Environment 10 -40 , Humidity 85% Specification Size 7cm*5cm*19cm 15.5*8.77*4.4cm Transportation And Storage Environment -20 -55 ,Humidity 85%
About Meltblown Nonwoven Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �?�µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
About Meltblown Nonwove Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
About Meltblown Nonwoven Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �?�µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
sugar Description: PRODUCT : Refined Suagr (ICUMSA - 100) Specification White Refined Cane sugar - Polarization : 99.80% Min Ash content : 0.04% Max Suphateash Content : 00.04% Maximum Moisture : 0.04% Max Solubility : 100% dry Free Flowing Radiation : Normal without Presence of Cesium or Iodine Certified Granulation : Fine Smell : Free of any Odor Reducing Sugar : 0.05% Maximum by Weight Fumigation : Well Cleaned from Molds, Unnatural Odors, Chemical and Insect ICUMSA: >OR=100 ICUMSA and
sugar Description: PRODUCT : Refined Suagr (ICUMSA - 100) Specification White Refined Cane sugar - Polarization : 99.80% Min Ash content : 0.04% Max Suphateash Content : 00.04% Maximum Moisture : 0.04% Max Solubility : 100% dry Free Flowing Radiation : Normal without Presence of Cesium or Iodine Certified Granulation : Fine Smell : Free of any Odor Reducing Sugar : 0.05% Maximum by Weight Fumigation : Well Cleaned from Molds, Unnatural Odors, Chemical and Insect ICUMSA: >OR=100 ICUMSA and
sugar Description: PRODUCT : Refined Suagr (ICUMSA - 100) Specification White Refined Cane sugar - Polarization : 99.80% Min Ash content : 0.04% Max Suphateash Content : 00.04% Maximum Moisture : 0.04% Max Solubility : 100% dry Free Flowing Radiation : Normal without Presence of Cesium or Iodine Certified Granulation : Fine Smell : Free of any Odor Reducing Sugar : 0.05% Maximum by Weight Fumigation : Well Cleaned from Molds, Unnatural Odors, Chemical and Insect ICUMSA: >OR=100 ICUMSA and
About Meltblown Nonwoven â?¢ Melt blown is a one step process to make fabrics from polymer. â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid. â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: â?¢ Adjustable Pores And Capillary Structure â?¢ Excellent barrier properties â?¢ Filament size 1 -3 �µm â?¢ High Elasticity â?¢ High Filtration capability â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). â?¢ Large Area-to-weight ratio â?¢ Self-bonding â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. â?¢ Very good thermal insulation for apparel application â?¢ Weak tensile properties â?¢ Wicking Properties Application of spun-bond nonwoven fabrics: â?¢ Sanitary and Hygiene: â?¢ Sanitary napkins, â?¢ Baby diapers and â?¢ Incontinence diapers â?¢ Medical and Surgical: â?¢ Gowns, â?¢ Face masks, â?¢ Caps, â?¢ Drapes, etc â?¢ Other Miscellaneous Applications: â?¢ Filtration Material, â?¢ Agriculture, â?¢ Oilsorbents â?¢ Hot-melt adhesives â?¢ Headliners, etc
Features * Pressure ranges from 10 mbar to 5 bar absolute, differential or gage * Barometric pressure ranges * Output: I²C bus and 0.5...4.5 V * Precision ASIC conditioning * Calibrated and temperature compensated * Miniature SMT and DIP housings * Sensortechnics PRO services Applications * Medical equipment * Environmental controls * HVAC General description First Sensor HDI sensors offer precision pressure measurement from 10 mbar up to 5 bar. The HDI series performs precision digital signal conditioning to achieve ultra high total accuracies. An internal ASIC compensates sensor offset, temperature effects and non-linearity to allow for an excellent Total Error Band (TEB) better than ±0.5 %FSS. The pressure sensors provide digital interfaces with I²C bus protocol as well as analog output signals. Optional 3 V supply voltage versions and special low power devices make the HDI series ideal for battery powered applications, e.g. in portable or handheld devices. Miniature SMT housings allow for space-saving PCB-mounting and maximum OEM design flexibility. Size without nipples and pins (approx.) 12 x 15 x 7 mm
The LDE differential low pressure sensors are based on thermal flow measurement of gas through a micro-flow channel integrated within the sensor chip. The innovative LDE technology features superior sensitivity especially for ultra low pressures. The extremely low gas flow through the sensor ensures high immunity to dust contamination, humidity and long tubing compared to other flow-based pressure sensors. Miniature SMT and DIP housings allow for space-saving PCB-mounting. Typical applications include medical devices, HVAC and instrumentation. on request
Sensor solutions for the detection of light, radiation, pressure, flow, level and acceleration..Electronic engineering and manufacturing services
Terminal blocks, connectors.
This DC to AC inverter is designed for the backlight of 6.4-15.1" LCD Panel with single CCFL lamp Input voltage: 12VDC Kick-off Voltage: min1500 Lamp Voltage: 500V Output Connector Mode: SM02B/ SM02 (8.0)*2 Transformer Qty: 2 Output Current: 6mA Output Voltage: 500V Frequency: 40 KHz Dimmer: Yes Dimension : 95.5mm*20mm*4.7mm.
Cellphone,heavy machinery,electricity cables.
INCLUDES: (1) M18 Compact Blower (0884-20) (1) M18 Compact 1/2" Hammer Drill/Driver (2607-20) (1) M18 Cordless 5/8" SDS Plus Rotary Hammer (2612-20) (1) M18 Cordless Right Angle Drill (2615-20) (1) M18 SAWZALL�® Reciprocating Saw (2621-20) (1) M18 Multi-Tool (Tool Only) (2626-20) (1) Band Saw (2629-20) (1) M18 6 �½" Circular Saw (Tool Only) (2630-20) (1) M18 Jig Saw (2645-20) (1) M18 1/4" Hex Impact Driver (2656-20) (1) M18 1/2" Impact Wrench with Pin Detent (2659-20) (1) M18 1/2" High-Torque Impact Wrench with Friction Ring (2663-20) (1) M18 Cordless 4-1/2" Cut-off / Grinder (2680-20) (1) M18 5-3/8" Metal Saw (2682-20) (1) M18 Work Light (Tool Only) (2735-20) (1) M18 REDLITHIUM XC 4.0 Extended Capacity Battery Pack (48-11-1840) (1) M18 Six Pack Sequential Charger (48-59-1806)
18V LXT 1/2" Hammer Driver-Drill (XPH10Z) 18V LXT Impact Driver (XDT11Z) 18V LXT 6-1/2" Circular Saw (XSS02Z) 18V LXT Recipro Saw (XRJ04Z) 18V LXT Brushless 4-1/2" / 5" Cut-Off/Angle Grinder (XAG04Z) 18V LXT Blower (DUB182Z) 18V LXT Xenon Flashlight (DML185) (5) 18V LXT Lithium-Ion 5.0Ah Battery (BL1830B) 18V LXT Lithium-Ion Rapid Optimum Charger (DC18RC) Tool Bag W/Wheels (831269-3) UK/USA
steel drums, electric component.
Makita LXT1500 Specifications: Voltage: 18V Number of Tools in Kit: 15 Makita LXT1500 Includes: 18V LXT 1/2" Hammer Driver-Drill (BHP452) 18V LXT 6-1/2" Circular Saw (BSS611) 18V LXT Recipro Saw (BJR182) 18V LXT Impact Driver (BTD141) 18V LXT 4-1/2" Cut-Off/Angle Grinder (BGA452) 18V LXT 1/2" Impact Wrench (BTW251) 18V LXT 7/8" SDS-Plus Rotary Hammer (BHR240) 18V LXT 3/8" Angle Driver-Drill (BDA350) 18V LXT Drywall Screwdriver (BFS450) 18V LXT 1/2" High Torque Impact Wrench (BTW450) 18V LXT 5-3/8" Metal Cutting Saw (BCS550) 18V LXT Blower (BUB182Z) 18V LXT Fluorescent/Incandescent Flashlight (BML184) 18V LXT Flashlight (BML185) 18V LXT Job Site Radio (BMR100W) (4) LXT Li-Ion 3.0 Ah Batteries (BL1830) (2) Rapid Optimum Battery Chargers (DC18RA) Contractor Bag with wheels and telescoping handle (831269-3) Contractor Bag (831284-7)
The Set Includes: (1) M18 Compact Blower (0884-20) (1) M18 Compact 1/2" Hammer Drill/Driver (2607-20) (1) M18 Cordless 5/8" SDS Plus Rotary Hammer (2612-20) (1) M18 Cordless Right Angle Drill (2615-20) (1) M18 SAWZALL�® Reciprocating Saw (2621-20)
