1. BUYER issues LOI with full company KYC including: Company Details, Contact Details for Signing Authority, and Passport Facing Page.2. SELLER issues Soft/Full Corporate Offer SCO/FCO) including: Full Company Details, Contact Details for Signing Authority, Passport Facing Page, and Company Banking Details.3. BUYER accepts terms and issues Irrevocable Corporate Purchase Order (ICPO) addressed to the SELLER. ICPO MUST include SELLERâ??S procedures on BUYERâ??S official company letterhead.4. Included with ICPO, BUYERâ??S Bank issues a BCL/POF/RWA bearing the SCO REF Number: SCOKVPL0524001 a. BUYER authorizes SELLER and/or SELLERâ??S Financial Service Provider to verify BCL/POF/RWA via BUYERâ??S Bank. 5. SELLER issues PPOP upon successful verification of BUYER bank BCL/POF/RWA. Documents included in the PPOP document package are:a. SELLER Bill of Lading b. Loaded SGS Report Q&Q -(Notarized).c. Chief Officers Ullage report-(Notarized) d. SELLER Charter Party Agreement (CPA) e. Product Passport (product analysis report) -(Notarized) f. Certificate of Origin -(Notarized) g. Statement of Product Availability -(Notarized) h. Commitment and Assurance Letter to supply -(Notarized) i. Authority to sell and collect (ATSC) -(Notarized) 6. End-to-end procedure after issuing PPOP is NOT expected to exceed TEN (10) working days, including 96 hours for vessel loading laycan. 7. Included with PPOP, SELLER issues Commercial Invoice (CI), and NCNDA / IMFPA to BUYER. 8. The BUYER signs and returns the executed documents to the SELLER. If the documents are not executed in a timely fashion. The SELLER may terminate this agreement without prejudice to any rights or remedies of the SELLER. Notice will be in writing. 9. After safely receiving the PPOP and returning the executed CI and documents. The BUYER MUST issue either MT 700 DLC or MT 799 BLOCKED FUNDS to the full value of commercial invoice amount. 10. Additionally, the BUYER MUST present his vessel for loading in the nominated port and be ready within 24 Hrs to load the full cargo. When requesting the UDTA to be issued, BUYER MUST provide the following details to the SELLER: a. VESSEL NAME b. VESSEL Q88 c. Vessel Agent full contact details 11. After fund instruments and vessel nomination details are received. The SELLER will issue Unconditional Dip Test Authority (UDTA) to the BUYER. SELLERâ??S agent will contact the BUYERâ??S agent and program the vessel for ShipTo-Ship (STS) loading within 24 hours. 12. BUYER loading LAYCAN will commence 24hrs after the UDTA is issued to the BUYER. BUYER has 96 hours Laycan to finish loading the vessel. CIN: U74999DL2016PTC298417 13. BUYER Dips Tanks prior to vessel berthing. BUYER obtains fresh SGS Quantity and Quality report. 14. After successful Dip Test and Q&Q report. BUYER instructs account manager to make full payment of the full value of commercial invoice via SWIFT MT103 to SELLERâ??S nominated accounts.
EN 590 is the current standard for all automotive diesel fuel. It is a 10 PPM sulphur content Gas Oil.
Bulk Wood Pellets Manufacturers / Quality Wood Pellets EN plus A1/ en plus a1 6mm-8mm For Sale Biomass Wood Pellet
As a transportation fuel, diesel fuel offers a wide range of performance, efficiency, and safety features. Diesel fuel also has a greater energy density than other liquid fuels, so it provides more useful energy per unit of volume
Specification item value EN Plus A1 Product Name: EN Pine Wood Pellet Packing :Custom Quality :Top Quality Brand :Custom SIze: 15kg Delivery Time :7-10 Days
100% Namibian Hardwood Charcoal for export. The charcoal is made from hardwood obtained from the clearing of invasive bush on Namibian farms. The invasive bush is cleared as it prevents the proper replenishment of the groundwater reserves in an already arid country. The dense bush prevents the grasslands from being used as grazing for livestock and wildlife. The Blackthorn (Acacia Mellifera) makes up 80% of the packed product. The balance is made- up of Candle Thorn (Acacia Hebeclada) and Mopane (Colophospermum mopane). threatening the indigenous fauna and flora. The particle size ranges from 30mm to 90mm. Charcoal is normally packed in 20kg white WWP. It can also be packed in bags supplied by the client. This would include Kraft paper bags and polyprop bags.
Sekelbos Barkless Firewood Logs 28cm Well-seasoned firewood logs. We harvest dead trees and dead branches from the hardwood Sekelbos tree in the North-West Province of South Africa. This area is commonly referred to as the Bosveld. The tree is classified as an invasive species. The bark naturally comes off due to the harsh sun and arid conditions after two to three years.
Biochar SA Hardwood 1mm>15mm Hardwood charcoal Biochar made from South African Sekelbos. Sekelbos is an invasive species threatening the indigenous fauna and flora. The particle size ranges from 1mm to 15mm. Biochar is normally packed in 20kg white WWP. It can also be packed in branded bags supplied by the client.
Origin: Kazakhstan Quantity: Up to 100000MT per month Trial order is required by prepayment. Tech Specs: 1 Mass fraction of total moisture, % not more than 0.5 not more than 0.5 2 Ash content, %, not more not more than 0.60 not more than 0.60 3 Mass fraction of sulfur, % not more than 2.0 not more than 2.0 4 Mass fraction of coke with a particle size > 6 mm, % not less than 30.0 not less than 30.0 5 True density, g/cm 2.02-2.06 2.06-2.09 6 Mass fraction of silicon, iron, vanadium, %: Silicon: not more than 0.080 not more than 0.080 Iron: not more than 0.080 not more than 0.080 Vanadium: not more than 0.045 not more than 0.045 7 Bulk density, g/cm: not less than 0.86 not less than 0.86 8 Mass fraction of oiling agent, %: not more than 0.50 not more than 0.50
Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60C Maximum 460 micrometers Copper Strip Corrosion (3h @ 50C) Class 1 Oxidation Stability @ 110C Minimum 20 hours FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 microns
Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm/s (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60�°C Maximum 460 micro Copper Strip Corrosion (3h @ 50�°C) Class 1 Oxidation Stability @ 110�°C Minimum 20 hour FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 mi
Property Unit Specification Cetane Number Minimum 51 Density at 15C kgm 820 845 Viscosity at 40C mms 20 45 Flash Point C Minimum 55 Cold Filter Plugging Point CFPP C Varies by climate zone Sulfur Content mgkg Maximum 10 Polycyclic Aromatic Hydrocarbons PAH by mass Maximum 8 Lubricity HFRR m Maximum 460 Distillation Recovery at 250C by volume Minimum 85 Distillation Recovery at 350C by volume Maximum 95 Ash Content by mass Maximum 001 Water Content mgkg Maximum 200
EN590 10 PPM Diesel is in high demand. We are direct mandate. We can supply in large quantity. Procedure for EN590 10 PPM is set by refinery. Please only inquire if you require serious, professional service and guarantee that you will receive EN590 10PPM fuel. NOTE: Refinery procedure is set for 100% success rate of buyer receiving the fuel. We offer CIF and FOB procedure. As market changes everyday, pricing of fuel may be subject to change. We can guarantee you the most competitive pricing for fuel, only if you follow direct refinery procedure. Please note in an international community where different language communication style and cultures can block business transactions. Let's work together to negotiate a successful transaction for you, the buyer.
Topglo Corporation is proud to announce the availability of premium coal from our extensive network of mines in Indonesia and South Africa. Our coal is meticulously sourced and quality-checked to meet the highest international standards, ensuring it fulfills the growing global energy demands. Key features include: Reputable sourcing from our trusted network mines Rigorous quality checks to ensure top-grade coal Variety of grades available to suit diverse needs Global shipping for efficient delivery worldwide.
Our premium shisha briquettes are crafted to deliver an exceptional smoking experience, catering to enthusiasts who demand the best. Known for their superior quality and performance, these briquettes are made from 100% natural materials, typically from sustainably sourced coconut shells or., ensuring an eco-friendly and sustainable product. Long-Lasting Burn: Our shisha briquettes provide an extended burn time, lasting up to 2-3 hours, which reduces the need for frequent replacements during your shisha sessions. High Heat Output: These briquettes deliver consistent and intense heat, perfect for producing thick, flavorful smoke without the need for excessive coal use. Low Ash Residue: Our briquettes produce minimal ash, ensuring a cleaner session and easier cleanup. Typically, the ash content is less than 2-3%, contributing to a purer smoking experience. Odorless and Tasteless: Premium briquettes are designed to be completely neutral, adding no unwanted flavors or odors to the shisha, allowing the natural flavors of your tobacco to shine through. Natural and Eco-Friendly: Made from renewable resources like coconut shells, our briquettes are free from chemicals, binders, or fillers. Theyâ??re a sustainable choice that doesnâ??t compromise on performance. Easy Ignition: Despite their dense composition, these briquettes ignite easily with a quick light and achieve optimal burning temperature swiftly, saving time and effort. Uniform Shape and Size: Consistency in shape and size means our briquettes stack neatly and burn evenly, providing a steady and reliable heat source throughout your session. Safe and Non-Toxic: Our briquettes are crafted to meet international safety standards, free from harmful substances that could affect your health or the environment. High Compression and Density: This ensures the briquettes are durable and less prone to breakage during transportation or handling, maintaining their integrity right up to use. Moisture Resistance: Properly sealed and stored, our briquettes resist moisture absorption, ensuring they light quickly and burn effectively every time. These characteristics set our premium shisha briquettes among the top 20 globally for 2024, meeting the expectations of even the most discerning shisha enthusiasts. Whether you are a casual smoker or a seasoned connoisseur, our briquettes guarantee a consistent, high-quality shisha experience every time.
Our company is an export supplier of WOOD PELLET from Indonesia, we can supply you regularly and for a long period of time, we are looking for trusted buyers, if you are interested please contact us
Charcoal
We are producers of export quality wood charcoal and coconut shell briquettes who are ready to meet your needs with specifications according to your requests. Prices are still negotiable, so if you have a target price and certain specifications, you can send a message to our account.
We are a briquette producing factory from East Java, Indonesia. Our briquettes are made from good quality coconut shells with low water content, odorless and low ash content. If you have a request for briquettes with certain specifications, we can fulfill it. Apart from selling coconut shell briquettes, we also sell the basic ingredient, namely coconut shell charcoal. If you are interested, you can visit our profile and send a message
We are PT Modern Coco charcoal briquette factory from Indonesia which has experience in exporting charcoal briquettes, we are ready to meet your needs if you are looking for good quality briquettes because our briquette making uses premium raw materials so we produce good briquettes
