Fuel Energy Resources Suppliers and Manufacturers

Sekelbos Barkless Firewood Logs 28cm Well-seasoned firewood logs. We harvest dead trees and dead branches from the hardwood Sekelbos tree in the North-West Province of South Africa. This area is commonly referred to as the Bosveld. The tree is classified as an invasive species. The bark naturally comes off due to the harsh sun and arid conditions after two to three years.

Biochar SA Hardwood 1mm>15mm Hardwood charcoal Biochar made from South African Sekelbos. Sekelbos is an invasive species threatening the indigenous fauna and flora. The particle size ranges from 1mm to 15mm. Biochar is normally packed in 20kg white WWP. It can also be packed in branded bags supplied by the client.

Origin: Kazakhstan Quantity: Up to 100000MT per month Trial order is required by prepayment. Tech Specs: 1 Mass fraction of total moisture, % not more than 0.5 not more than 0.5 2 Ash content, %, not more not more than 0.60 not more than 0.60 3 Mass fraction of sulfur, % not more than 2.0 not more than 2.0 4 Mass fraction of coke with a particle size > 6 mm, % not less than 30.0 not less than 30.0 5 True density, g/cm 2.02-2.06 2.06-2.09 6 Mass fraction of silicon, iron, vanadium, %: Silicon: not more than 0.080 not more than 0.080 Iron: not more than 0.080 not more than 0.080 Vanadium: not more than 0.045 not more than 0.045 7 Bulk density, g/cm: not less than 0.86 not less than 0.86 8 Mass fraction of oiling agent, %: not more than 0.50 not more than 0.50

Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60C Maximum 460 micrometers Copper Strip Corrosion (3h @ 50C) Class 1 Oxidation Stability @ 110C Minimum 20 hours FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 microns

Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm/s (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60�°C Maximum 460 micro Copper Strip Corrosion (3h @ 50�°C) Class 1 Oxidation Stability @ 110�°C Minimum 20 hour FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 mi

Property Unit Specification Cetane Number Minimum 51 Density at 15C kgm 820 845 Viscosity at 40C mms 20 45 Flash Point C Minimum 55 Cold Filter Plugging Point CFPP C Varies by climate zone Sulfur Content mgkg Maximum 10 Polycyclic Aromatic Hydrocarbons PAH by mass Maximum 8 Lubricity HFRR m Maximum 460 Distillation Recovery at 250C by volume Minimum 85 Distillation Recovery at 350C by volume Maximum 95 Ash Content by mass Maximum 001 Water Content mgkg Maximum 200

Topglo Corporation is proud to announce the availability of premium coal from our extensive network of mines in Indonesia and South Africa. Our coal is meticulously sourced and quality-checked to meet the highest international standards, ensuring it fulfills the growing global energy demands. Key features include: Reputable sourcing from our trusted network mines Rigorous quality checks to ensure top-grade coal Variety of grades available to suit diverse needs Global shipping for efficient delivery worldwide.

Charcoal

Moisture : 3.7% Ash Content : 1.7% Volatile Matter : 36.3% Fix Carbon : 62% Total Sulfur : 0.17% Calorific : 6836 Kcal/Kg Size : 5-12cm Burning Time : 3-4 hours Mainly we use 40 ft HC to send the product. Payment with TT 50% Beginning Process After Receiving Payment, 50% When Cargo Ready To Ship.

Wood pellets are a renewable resource, the fuel that is already widely available in the world nowadays. The wood shavings are compressed under great pressure and forced through holes. This is a hot process and the natural lignin in the sawdust/wood shavings melts and binds the dust together, holding the pellet in shape and giving it that characteristic sheen on the outside. Top quality wooden pellets natural pressed solid fuel wholesale prices, wood pellet in bulk Calorific value ca. 49kW/h per kg, Bulk density not less 600 kg/m3, Diameter 8 mm, Length 5-40 mm. Total moisture as received max 10%, Ash 0,5 %, Melting ashes not less 1200 Co, Moisture content 10%, Mechanical Durability 98%.

World Simplest Procedure: No Upfront Payment, POF FOR POP DEAL PRICE: USD 560/MT Gross. VTT- FOB ASWP TRANSACTION PROCEDURES: 1. Buyer provides ICPO incorporating sellerâ??s procedures, Buyer RWA + ATV for seller to perform due diligence and verify POF with Buyer's Bank. 2. Seller sends signed Commercial Invoice (CI) to Buyer and Buyer countersigns and sends CI back to seller within 48 hours. NCNDA+IMFPA is completed and signed off by all parties. 3. Products will be loaded onto a vessel at the seller's loading port and fresh SGS will be completed and provided to the buyer. 4. Seller will provide buyer with a copy of the Charter Party Agreement; therefore, the buyer can view the vessel as it is moving to the destination port. 5. The buyer has choice to either have the product discharged in any of the ports specified above based on product. 6. Upon arrival of the vessel tanker at the final discharge port, the buyer shall show updated POF, conduct the SGS/CIQ Inspection (optional at buyer's expense) and make the payment for the full shipment via TT Wire or MT103 TT (Wire Transfer). Buyer has the choice of paying in full through TT Wire or MT103 upon first SGS at loading port, or when the product starts discharging into buyerâ??s tank or as soon as the discharge is completed into the buyerâ??s tank. 7. Seller transfers ownership of the product to the buyer as per the buyerâ??s instructions. 8. The seller pays all buyer and seller intermediaries the full commission amount as stated in the NCNDA/IMFPA agreement. Subsequently, monthly contract proceeds as outlined in the terms and conditions of the sales and purchase agreement between the buyer and the seller. VTO PROCEDURES- FOB ASWP PROCEDURES (VESSEL TAKE OVER): 1. Buyer provides ICPO incorporating sellerâ??s procedures, Buyer RWA + ATV for seller to perform due diligence and verify POF with Buyer's Bank. 2. Seller sends signed Commercial Invoice (CI) to Buyer and Buyer countersigns and sends CI back to seller within 48 hours. NCNDA+IMFPA is completed and signed off by all parties. 3. Products will be loaded onto a vessel at the seller's loading port and fresh SGS will be completed and provided to the buyer. 4. Seller will provide buyer with a copy of the Charter Party Agreement; therefore, the buyer can view the vessel as it is moving to the destination port. 5. Upon arrival of the vessel tanker at the final discharge port, the buyer shall show updated POF, conduct the SGS/CIQ Inspection (optional at buyer's expense) and make the payment for the full shipment via TT Wire or MT103 TT (Wire Transfer). 6. Seller transfers ownership of the product and buyer takes over the vessel. 7. The seller pays all buyer and seller intermediaries the full commission amount as stated in the NCNDA/IMFPA agreement. Subsequently, monthly contract proceeds as outlined in the terms and conditions of the sales and purchase agreement between the buyer and the seller.

PRODUCTS PRICES AND LIFT ABLE QUANTITIES (FOB) - VOPAK TERMINALS. DIESEL OIL EN590 -10PPM LIFT ABLE QUANTITY FOB: Minimum Quantity: 40,000 Metric Tons per Month, Maximum Quantity: 300,000 Metric Tons Lift able. FOB Price: Gross USD $560.00MT / Net USD $540.00MT, FOB Rotterdam |Jurong & Fujairah Ports Commissions: $20, Seller side - $ 10.00 per Metric Tons / Buyer side - $ 10.00 per Metric Tons, Payable by Seller FOB TRANSACTION PROCEDURE FOB VOPAK TERMINALS DIP & PAY 1. Buyer Sends CIS and ICPO of their purchasing product to Seller for verification and processing: 2. Seller submit buyer files to Vopak Terminal Manager. 3. Vopak Terminal Manager send Vopak Agreement to buyer through Seller. Buyer within 48 hours sign and return the Vopak Agreement through Seller. 4. Buyer finalizes the Vopak Terminal Protocols cost through the supplier with the Vopak Terminal Manager, and obtain the following and submit the same to Seller as listed below. o VopakBarcode o VopakRegistrationinformation. o VopakReferenceCode. 4b. Format of Authorization Form to accompany the information LETTER OF AUTHORIZATION: We, (Buyer Name), with registered Office, at (Address). represented by Mr. ________________, with Passport number ________________. Owner of Barcode code at Royal Vopak Rotterdam, with contract reference number: _____________. NB: Immediately buyer complete the above process and receive Vopak Reference through Vopak Terminal Manager, buyer will have access to communicate directly to Vopak Management with the help of the Reference code assigned to the buyer. 5. Seller, sends Cl for Buyer's endorsement. Buyer signs the CI and retune back within 24 hours of receiving alongside side with Sign Letter of Authorization. 6. Seller issue Buyer Full POP documents along with fresh SGS (Not less than 48 hours, one-time official confirmation mail from SGS official). Fresh SGS Report or Saybolt (Not later than 24 72 hours) Tank Storage Receipt (TSR) with GPS Coordinates of where the Tanks/Vessel are located. Injection Report Agreement Authorization to Sell Authorization to verify the product in the tank (ATV) Country Certificate of Origin Approved Dip Test Authorization (DTA Availability of Product, Commitment to Supply, 7. After verification of full POP by buyer, injection begins. 8. Upon completing the Injection, seller transfers title to buyer. 9. Buyer makes full payment after via MT103.

Different specifications BBQ industrial 20mm to 120mm Restaurant mixed 30mm to 200mm above 40mm to 200mm above Ayeen wood charcoal single wood 30mm to 200mm above

1. Shisha Charcoal consist of : a. Cube b. Kalaud c. Hexagonal d. Duos e. Duos zig-zag f. Flat 2. BBQ Charcoal consist of : a. BBQ Square / Cube b. BBQ Hexa 3. Sawdust consist of : a. Grade AB b. Grade ABC Standard c. Grade ABC Super