Fuel Energy Resources Suppliers and Manufacturers

Birch All firewood is kiln dried till 1219 Firewood length 30cm diameter 816cm Firewood made from Birch FIREWOOD Packaging 40L nets 50x72cm we can fit 1716 pieces of 40L nets in a 40 container on 26 pallets and 66 nets on each pallet Weight of each bag is 14kg pallet dimension 110m x 090m x 230m 40L nets 50x72cm we can fit 2016 pieces of 40L nets in a 45 HC container on 28 pallets and 72 nets on each pallet Weight of each bag is 14kg pallet dimension 110m x 090m x 250m 20L nets 42x30cm we can fit 2688 pieces of 20L nets in a 40 container on 48 pallets on two levels and 56 nets on each pallet Weight of each bag is 78kg pallet dimension 112m x 100m x 115m FIREWOOD Prices 40L birch bag 360 EUR transportation 20L birch bag 260 EUR transportation These prices are currently in Vecpiebalga Latvia LV4122

Petroleum coke is a byproduct of petroleum refining, useful in the production of electrodes used as carbon anodes for the aluminum industry, graphite electrodes for steel making, as fuel in the firing of solid fuel boilers used to generate electricity, and as a fuel for cement kilns. Petroleum coke is a by-product of the coker process in the oil industry. In its raw form, it is also called â??green cokeâ?? or green petroleum coke. Calcined petroleum coke is an important industrial commodity that links the oil and the metallurgical industries as it provides a source of carbon for various metallurgical applications including the manufacture of anodes for the aluminum pot liners and for graphite electrodes.

Virgin Oil D6, also known as residual fuel oil, is a petroleum product that is obtained from the refining process. It has a high density and a high viscosity, making it a suitable heavy fuel oil used in large marine engines and power plants that require high levels of energy. Virgin Oil D6 is produced from the residue left over after the lighter hydrocarbons, such as gasoline and diesel fuel, are removed from crude oil. It is a heavy, black viscous liquid that is resistant to flow. The product has a high sulfur content, typically between 2.5% and 4%, and a calorific value of approximately 38 MJ/kg.

EN590 Diesel (10PPM) ULSD (Ultra Low Sulfur Diesel) is a premium diesel fuel that conforms to the European standard EN590, with an ultra-low sulfur content of only 10 parts per million (PPM). This type of diesel is known for its environmental benefits and is widely used in modern diesel engines.

WOOD PELLETS ENPLUS A1 6mm Wood Pellets ENplus A1 for sale. Available to order: bulk quantities of ENPlus A1 BSL authorised wood pellets in bulk bags. Unbeatable value for money â?? Bioglow ENPlus A1 6mm Wood Pellets in 1180kg Big-Bags 6mm Wood Pellets ENPlus A1: BG 301 Approved on the Biomass Suppliers List under number BSL0541408-0015. Delivery by tipper lorry available on request. Price 360 Euro/ tonne EXW Scunthorpe. Delivery at cost â?? please message us for details on info@biglow.co.uk or call 02030020359. Detailed specifications for the Bioglow A1 quality wood pellets are: Diameter: 6mm Heat value at least: 17.3 MJ/kg (4.8 kWh/kg) Ash: 0.27% Moisture: 8.8% Fines: 0.1% Finished pellets are cooled, then packaged for ease of use and transportation. Packaging options Wood pellets, pine, 6mm, polypropylene bag 15kg Wood pellets, pine, big-bag, 1 ton VAT at 20% included for resellers â?? contact us to receive quote with 5% VAT for own use. EN PLUS A1 WOOD PELLETS BSL authorised, premium grade 6mm wood pellets for use in all wood pellet boilers and stoves, they comply with the EN Plus A1 standard and fully RHI compliant. Manufactured in the UK from raw materials which all come from FSC or 6mm Wood Pellets ENplus A1 For Sale. 6mm super premium quality wood pellets Fully BSL & RHI compliant 100% Grown premium wood pellets Complies with EN plus A1 Low ash content ENplus A1 wood pellets. High-quality wood pellets (6 mm) are made from environmentally friendly pine wood without additives. They have high performance characteristics, such as high calorific value, low ash content and humidity. Our pellets do not slag and do not form cakes. ADVANTAGES OF WOOD PELLETS WE SUPPLY By purchasing pine wood pellets in our online supermarket, you save your budget. Having tried our pellets in practice once, you will become our regular customer. The following are the main advantages of 6mm Wood Pellets ENplus A1: 1. Low price. We are a pellet manufacturer. Deliveries are conducted directly from the manufacturer to the buyer without intermediaries. This factor has a positive effect on pricing. 2. Ecological cleanliness. The use of wood waste has a positive effect on the environment. Pine raw materials from which fuel pellets are made from ecologically clean trees. 3. Low ash content â?? up to 0.7%. Our pellets do not slag and do not form cakes. We do not buy sawdust, which usually contains a large amount of sand â?? which increases leads to the appearance of cakes. First of all, it is your safety and the longevity of your boilers. 6mm Wood Pellets ENplus A1 for sale. 4. Low humidity of pellets up to 10%. This primarily affects the heat transfer. Please Contact Us for more information.

We are exporter of all types of Wood Briquettes. Our Products are of very High Quality.

We are exporter of all types of Wood Pellets. Our Products are of very High Quality.

We are exporter of all types of Dried Firewood. Our Products are of very High Quality.

Indonesian Steam Coal in Various Calories, High, Middle and Low. We have sources in Kalimantan and Sumatera island provides any scope the need of your spec. We can provide in any quantity in bulk start from 10.000 MT and up to 100.000 MT a month.

1. BUYER issues LOI with full company KYC including: Company Details, Contact Details for Signing Authority, and Passport Facing Page.2. SELLER issues Soft/Full Corporate Offer SCO/FCO) including: Full Company Details, Contact Details for Signing Authority, Passport Facing Page, and Company Banking Details.3. BUYER accepts terms and issues Irrevocable Corporate Purchase Order (ICPO) addressed to the SELLER. ICPO MUST include SELLERâ??S procedures on BUYERâ??S official company letterhead.4. Included with ICPO, BUYERâ??S Bank issues a BCL/POF/RWA bearing the SCO REF Number: SCOKVPL0524001 a. BUYER authorizes SELLER and/or SELLERâ??S Financial Service Provider to verify BCL/POF/RWA via BUYERâ??S Bank. 5. SELLER issues PPOP upon successful verification of BUYER bank BCL/POF/RWA. Documents included in the PPOP document package are:a. SELLER Bill of Lading b. Loaded SGS Report Q&Q -(Notarized).c. Chief Officers Ullage report-(Notarized) d. SELLER Charter Party Agreement (CPA) e. Product Passport (product analysis report) -(Notarized) f. Certificate of Origin -(Notarized) g. Statement of Product Availability -(Notarized) h. Commitment and Assurance Letter to supply -(Notarized) i. Authority to sell and collect (ATSC) -(Notarized) 6. End-to-end procedure after issuing PPOP is NOT expected to exceed TEN (10) working days, including 96 hours for vessel loading laycan. 7. Included with PPOP, SELLER issues Commercial Invoice (CI), and NCNDA / IMFPA to BUYER. 8. The BUYER signs and returns the executed documents to the SELLER. If the documents are not executed in a timely fashion. The SELLER may terminate this agreement without prejudice to any rights or remedies of the SELLER. Notice will be in writing. 9. After safely receiving the PPOP and returning the executed CI and documents. The BUYER MUST issue either MT 700 DLC or MT 799 BLOCKED FUNDS to the full value of commercial invoice amount. 10. Additionally, the BUYER MUST present his vessel for loading in the nominated port and be ready within 24 Hrs to load the full cargo. When requesting the UDTA to be issued, BUYER MUST provide the following details to the SELLER: a. VESSEL NAME b. VESSEL Q88 c. Vessel Agent full contact details 11. After fund instruments and vessel nomination details are received. The SELLER will issue Unconditional Dip Test Authority (UDTA) to the BUYER. SELLERâ??S agent will contact the BUYERâ??S agent and program the vessel for ShipTo-Ship (STS) loading within 24 hours. 12. BUYER loading LAYCAN will commence 24hrs after the UDTA is issued to the BUYER. BUYER has 96 hours Laycan to finish loading the vessel. CIN: U74999DL2016PTC298417 13. BUYER Dips Tanks prior to vessel berthing. BUYER obtains fresh SGS Quantity and Quality report. 14. After successful Dip Test and Q&Q report. BUYER instructs account manager to make full payment of the full value of commercial invoice via SWIFT MT103 to SELLERâ??S nominated accounts.

100% Namibian Hardwood Charcoal for export. The charcoal is made from hardwood obtained from the clearing of invasive bush on Namibian farms. The invasive bush is cleared as it prevents the proper replenishment of the groundwater reserves in an already arid country. The dense bush prevents the grasslands from being used as grazing for livestock and wildlife. The Blackthorn (Acacia Mellifera) makes up 80% of the packed product. The balance is made- up of Candle Thorn (Acacia Hebeclada) and Mopane (Colophospermum mopane). threatening the indigenous fauna and flora. The particle size ranges from 30mm to 90mm. Charcoal is normally packed in 20kg white WWP. It can also be packed in bags supplied by the client. This would include Kraft paper bags and polyprop bags.

Sekelbos Barkless Firewood Logs 28cm Well-seasoned firewood logs. We harvest dead trees and dead branches from the hardwood Sekelbos tree in the North-West Province of South Africa. This area is commonly referred to as the Bosveld. The tree is classified as an invasive species. The bark naturally comes off due to the harsh sun and arid conditions after two to three years.

Biochar SA Hardwood 1mm>15mm Hardwood charcoal Biochar made from South African Sekelbos. Sekelbos is an invasive species threatening the indigenous fauna and flora. The particle size ranges from 1mm to 15mm. Biochar is normally packed in 20kg white WWP. It can also be packed in branded bags supplied by the client.

Origin: Kazakhstan Quantity: Up to 100000MT per month Trial order is required by prepayment. Tech Specs: 1 Mass fraction of total moisture, % not more than 0.5 not more than 0.5 2 Ash content, %, not more not more than 0.60 not more than 0.60 3 Mass fraction of sulfur, % not more than 2.0 not more than 2.0 4 Mass fraction of coke with a particle size > 6 mm, % not less than 30.0 not less than 30.0 5 True density, g/cm 2.02-2.06 2.06-2.09 6 Mass fraction of silicon, iron, vanadium, %: Silicon: not more than 0.080 not more than 0.080 Iron: not more than 0.080 not more than 0.080 Vanadium: not more than 0.045 not more than 0.045 7 Bulk density, g/cm: not less than 0.86 not less than 0.86 8 Mass fraction of oiling agent, %: not more than 0.50 not more than 0.50

Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60C Maximum 460 micrometers Copper Strip Corrosion (3h @ 50C) Class 1 Oxidation Stability @ 110C Minimum 20 hours FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 microns

Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm/s (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60�°C Maximum 460 micro Copper Strip Corrosion (3h @ 50�°C) Class 1 Oxidation Stability @ 110�°C Minimum 20 hour FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 mi

Property Unit Specification Cetane Number Minimum 51 Density at 15C kgm 820 845 Viscosity at 40C mms 20 45 Flash Point C Minimum 55 Cold Filter Plugging Point CFPP C Varies by climate zone Sulfur Content mgkg Maximum 10 Polycyclic Aromatic Hydrocarbons PAH by mass Maximum 8 Lubricity HFRR m Maximum 460 Distillation Recovery at 250C by volume Minimum 85 Distillation Recovery at 350C by volume Maximum 95 Ash Content by mass Maximum 001 Water Content mgkg Maximum 200

Origin: Kazakhstan or non-Embargo Country Specifications: En590-10ppm, Euro 5 Grade with non-Biodiesel content*** Packaging: Bulk Shipment Delivery Method: FOB, CIF Destination: CIF (ASWP), FOB (Rotterdam, Jurong, Houston, Fujairah, China) MOQ: 50,000 MT/mth (12 mth contract); Trial Lift Available) Note: Price FOB/CIF may vary from listed (slight negotiation possible, depending on order volume)