Electric Chokes Ballast Suppliers and Manufacturers

All products met ul. Csa, enec approval

Electric ballast Tp701 lifetime(hrs):20000 dimension(mm)l*d*h: 196*46*35 1*20w, 1*22w, 1*30w, 1*32w Watt (w) Voltage (v) frequency (hz) power factor (p.F.) n.W./g.W. (kg) carton-box 100pcs(cm) 1*20w 110-130 60 0.65 15/17 81.5*26.5*22 220-240 50 0.95 1*30w 110-130 60 0.65 16/18 220-240 50 0.95 1*40w 110-130 60 0.65 17/19 220-240 50 0.95 Carton

Electric chokes Ballast are manufactured used 28 Swg.coated aluminum wire, 1200 turns, resin based to operate on 240/250 cy.AC.0.5 Amps and open type copper chokes using 28 gauge Copper wire with 750 turns, also to operate on 240/250 cy.AC, 0.5 amps. Both products are guaranteed for quality and free replacement effected immediately on receipt of rejected pieces without question. But the rejections should be accompanied by the nature of defects noticed and the customers view/advice how to avoid or im0rove the situation to ensure consistent quality/service. Weigfht 600 to 650 gms. 1.25"x3.5"x2cms.Ht.

With broadband voltage (120-277 V), abnormal lamp protection, so that the product can work more secure, and reliable; PC fire-retartant plastic shell, endure high temperature, fire-retardant, in line with the advanced standards of CE design Since power consumption less ,so energy saving significantly Preheating activated lamp is easier to start at low temperatures, longer life time for lamp Low temperature, no stroboscopic, no noise, anti-electromagnetic interference, low harmonic distortion Apply to frequent switching, to long time Lighting Project (shops, showrooms, homes, factories, offices, workshops,water clusters lighting or decorative lighting)and so on; Perfect consistency, and stable performance - 72.2*17.2*10.5 132.3*17.2*10.5 62*23*14 124*23*14

1.Bulb parameters, the lamp current is 1.8a, lamp voltage is 100v, 2.Start current: less than 2.32a, working current is 1.8a, power factor is 0.41, power loss 16w, circuit power 168w 4pcs/ctn, 12.72kgs/ctn, carton size:260*155*170

Ballast Tp702a lifetime(hrs):10000 dimension(mm)l*d*h: 112*45*40 1*20w, 1*30w, 1*40w 2*20w, 2*30w, 2*40w Watt(w) Voltage (v) frequency (hz) power factor (p.F.) n.W./g.W. (kg) carton-box 100pcs(cm) 1*20w 110/220 50/60 0.65 12/14 53*30*23 1*30w 110-220 50/60 0.65 13/15 1*40w 110/220 50/60 0.65 14/16 2*20w 110/220 50/60 0.65 14/16 2*30w 110/220 50/60 0.65 15/16 2*40w 110/220 50/60 0.65 16/18 Carton

For price, specification and other details please contact us

Car headlight OEM CDH-933 12V 55W Slim HID Xenon Ballast 1.Xenon spec. 1)Dimension 85.5x72.5x28mm 2)N.W 350�20g 3)Power 55�2W 4)Input voltage range 9~16V 5)Rated voltage 12.5V 6)Start Current 4.5A 7)Hot light up current 4.5A 8)Max. start voltage 23kV 9)Working Current 4.5A 10)Working temperature -40~ 105�C 11)Lifetime 50,000H 12)Holder's N.W 14G 13)Scope of application 98% Cars 14)Defect Rate Less than 1% 2.Car lamps advantage: 1)Over / low-current protection 2)Voltage output overload / low protection 3)Thunder resistance 4)High safety 5)Short-circuit protection: Auto protect 0.5 second after short-circuit 6)Open protection: Auto protect 0.5 second after open-circuit 7)High voltage protection :more than 16.5V closeless than 16V open 8)Low voltage protection:less then 6.5V close more than 8.5V open 9)Reverse Protection:Auto Protect in 1second after Reverse connection 3. HID submitted following tests: 1) 2-3hours continuous working aging test. 2) Connection circuit protection test. 3) Lack of voltage protection test. 4) Over voltage protection test. 5) Flash light concussion test. 6) Quakeproof capability test. 7) Cold & warm boot test. 8)Polarity protection test. 9)Short-Circuit protection test. Aging Test: (Height simulation of the internal engine temperature of the car for adjustment test) 4.Packing details: 1)White box Size 13*8*4.5CM 2)CTN Size 41.5*23.5*27.5CM(50Pcs) 3)CTN G.W about 16KG 6.Fit Most Car lamps: 1)H Series(Single Bulbs) H1,H3,H4,H7,H8/H9/H11,H10,H13,H15,H16/5202 etc 2)900 Series 9003/H4 ,9004/9007,9005/HB3,9006/HB4 etc 3)A HID and A Halogen H4-2,H13-2,9004/9007-2 etc 4)Bi-xeon bulbs(With wire relays) H4-3/H4 H/L, H13-3/H13 H/L, 9004/9007 H/L etc More details pls call us,thank you. Mid to High-end markets! CDHlighting-13years Manufacturer and trading for Xenon/LED Headlights,LED DRL,HID projector lens etc car lights in China!

Car headlight OEM CDH-933 12V 55W Slim HID Xenon Ballast 1.Xenon spec. 1)Dimension 85.5x72.5x28mm 2)N.W 350±20g 3)Power 55±2W 4)Input voltage range 9~16V 5)Rated voltage 12.5V 6)Start Current 4.5A 7)Hot light up current 4.5A 8)Max. start voltage 23kV 9)Working Current 4.5A 10)Working temperature -40~ 105°C 11)Lifetime 50,000H 12)Holder's N.W 14G 13)Scope of application 98% Cars 14)Defect Rate Less than 1% 2.Car lamps advantage: 1)Over / low-current protection 2)Voltage output overload / low protection 3)Thunder resistance 4)High safety 5)Short-circuit protection: Auto protect 0.5 second after short-circuit 6)Open protection: Auto protect 0.5 second after open-circuit 7)High voltage protection :more than 16.5V closeï¼?less than 16V open 8)Low voltage protection:less then 6.5V close ï¼?more than 8.5V open 9)Reverse Protection:Auto Protect in 1second after Reverse connection 3. HID submitted following tests: 1) 2-3hours continuous working aging test. 2) Connection circuit protection test. 3) Lack of voltage protection test. 4) Over voltage protection test. 5) Flash light concussion test. 6) Quakeproof capability test. 7) Cold & warm boot test. 8)Polarity protection test. 9)Short-Circuit protection test. Aging Test: (Height simulation of the internal engine temperature of the car for adjustment test) 4.Packing details: 1)White box Size 13*8*4.5CM 2)CTN Size 41.5*23.5*27.5CM(50Pcs) 3)CTN G.W about 16KG 6.Fit Most Car lamps: 1)H Series(Single Bulbs) H1,H3,H4,H7,H8/H9/H11,H10,H13,H15,H16/5202 etc 2)900 Series 9003/H4 ,9004/9007,9005/HB3,9006/HB4 etc 3)A HID and A Halogen H4-2,H13-2,9004/9007-2 etc 4)Bi-xeon bulbs(With wire relays) H4-3/H4 H/L, H13-3/H13 H/L, 9004/9007 H/L etc More details pls call us,thank you. Mid to High-end markets! CDHlighting-13years Manufacturer and trading for Xenon/LED Headlights,LED DRL,HID projector lens etc car lights in China!

Ppi series characteristic silicon iron distrubuted gapped powder core lower losses than powder iron cores good dc bias performance lower cost

Everbright electronics (ningbo) co., ltd. Is a professional manufacturer of electronic metal halid Ballast, electronic hps ballast, electronic ballast for road lighting and grow light ballast. 1pc/box

All type of ballast.

Key Specifications/Special Features: SMD common-mode choke coil Low profile and small size SMD Suitable for reflow soldering Operating temperature: -10 to +60 degree Celsius Applications: desktops, laptops, DSC, and computer peripheral RID common-mode choke coils Small-profile choke coils Ferrite core toroid choke coils Large-current choke coils Low resistance choke coils MPP/hi-flux/sendust/RF carbonyl/iron power core choke coils For excellent EMI suppressor High frequency, low loss Common-mode filter Toroidal common-mode inductor Inductance L1, L2 range: 100uH to 5,000uH Materials: Core: ferrite core Wire: 2-UEW Base: phenolic base Terminal: tinned-copper wire Adhesive: epoxy resin Temperature rise: 45 degree Celsius maximum at rated current Storage temperature: -25 to +85 degree Celsius Operating temperature: -20 to +80 degree Celsius Resistance to solder heat: 260 degree Celsius, 10 seconds

Key Specifications/Special Features: Rated current: 0.3 to 10A Low resistance 0.7 to 100mH dual choke 100kHz to 3MHz common mode resonance Low temperature rise Applied in DC/DC, AC/DC line noise suppression, telecommunication system, LCD/PDP televisions, and computer periph

Types: EC type high frequency switch transformer EE, EI type high frequency switch transformer PQ type high frequency switch transformer EFD type high frequency switch transformer EP type magnet-shielding switch transformer RM type communication filter, aux power transformer ET and FT type linearity filter T (ring) type filter and switch transformer G (jar-shaped) switch transformer DR (I) type transformer T (ring) iron power core, DC filter inductor Applications: switching power supplies, chargers, TV and CRT monitor display, UPS, VCD/DVD players, audio and visual equipment, OA machines, and inverter

Advantage: Lighter xenon bulb for 5 000 hours Performance better than hella Up to war industry level Protect all the electrical parts No damage start, protect xenon bulbs Constant power Specification: 1) input voltage range : 9v~18v 2) rated voltage : 13.2v 3) cold light up current : 6.5a 4) hot light up current : 5.4a 4) max. Start voltage : 23kv 5) input current : 3.2a 6) output power : 40.2w 7) working temperature : -40~105ípc 8) size : 10.5cm*7.7cm*3.2cm

Toroidal choke.

1) input voltage range: 8v-19v 2) typical current: 3.2a 3) output power: 35w 4) stable performance 5) working temperature: -40 ~+105 6) the ballast matches all lamps, such as h1, h3, h4, h4 h/l, h7, h8, h9, h11, 9004, 9005, 9006, 9007, d2s, d2r, d2c etc.

We have high quality fluorescent energy saving ballast, we offer the bats price and option of bargain. Latest technology in saving energy cost. 1x50 pieces