Breweries Distillery Machinery Suppliers and Manufacturers

"ZJN drying equipment use hot air, triple stage and multi-loop drying process. It can dry above 80% water content beer dregs to below 15% moisture DDGS. In structure, there is a rotary harrow in first stage,which to break the sticky beer residues into small sizes and spread into drying room. Contacting with hot air directly, the sticky beer lees water content will be reduced instantly, the viscousity will be reduced soon. With the function multiple loop lifting boards and rotary cylinder, the beer dregs will form a thin material curtain, which increase the drying speed. In each drying stage, the hot air temperature and volume is different, the lifting and guiding boards are also different. It makes sure the dregs will be always dry under suitable drying environment. Thus the drying efficiency greatly improved and the heating is fully used and energy is saved. The whole process is work under negative pressure, uses three level mutiple sealing technology, it is very safe and clean. This dryer can also be used for alchohol dregs drying, wine lees drying, brewing sewage drying etc. "

Turn Over on books -55-65 cr Num - of emplyoees - 85-100 Machinery Cost is - 55-60 cr Land cost is --- 30 cr Storage Tank is frm ALFA LEVEL All Machine are computerized and from germany. Company has a contract with KingFisher for supply of liquor 500000 ltr pm . With TAMIL NADU GOVT 500000 ltr PM. Wine is under Brand VALENTINA (RED & WHITE) BEER- KINGS.

Beer equipment.

1000L Brewery Beer Brewhouse System Beer Brewing System DESCRIPTION PRODUCT PARAMETERS Malt Mill: 300-500kg/h, Brand malt mill, all Stainless steel, two alloy rollers mill, complete with motor, belt and pulley, the distance can be adjusted. The brewhouse system: Three vess Material SUS304, top dished head, Surface brushed, interior mirror polish, Polyurethane insulation, thickness: 100mm; Inner body thickness 3mm, cladding thickness 2mm; Rotary CIP spray balls, temperature sensor; Stainless steel manhole with sight mirror, Led cold light, bright, lower power consumption and lasting; Stainless steel legs adjustableã?? Heating method: electric heating, steam heating and gas heating. Associated fittingsï¼? Mechanical agitator with frequency converter, Siemens motor, ABB pump, double or single stage plate heat exchanger and other valves. Fermentation system: Fermenter: Sanitary Stainless steel 304, conical vertical tank , Effective volume:1000L, total volume: 1250L ; Test pressure:0.3Mpa, working pressure: 0.15Mpa; top dish head,Surface brushed, interior mirror polish; Polyurethane insulation thickness: 100mm; inner thickness 3mm, cladding thickness 2mm; Dimple type glycol cooling jacket,thickness is 1.5mm; Top safety valve, Side manhole door, Top hops adding port, Rotary CIP spray balls, cleaning elbow, temperature sensor, Sample valve, separate outlet for yeast and clear beer, lower side cone beer outlet(rotary), bottom drain port; Mechanical pressure valve, Pressure gauge, Glycol solenoid valves, Stainless steel legs with screw assembly to adjust legs height,Complete with associated valves and fittings. Optional: bright beer tank, yeast adding tank etc. Glycol cooling system: Glycol water tank: Sanitary Stainless steel 304, Effective capacity 2000L;Surface brushed, interior mirror polish; Polyurethane insulation thickness: 100mm;The thickness of inner body is 3mm, cladding is 2mm; Top round shape man-hole door, temperature sensor; Stainless steel legs adjustable. Complete with associated Kansa chiller, ABB pump and valves and fittings etc. More information please view here.

Craft Brewery,

Company introduction: As a professional manufacturer of Brewery lines in China. Our business scope includes complete brewery line design consulting & components supply for pub breweries , micro breweries and industrial breweries. We could supply different brewery lines according your special configuration needs or supply components according your requested designed configurations. Due to the competitive cost in designing, manufacturing, training and after sales services, our brewery lines enjoy a good market both at home and abroad. Product description: The whole beer equipment is consisted of Mash system,Fermentation system,Refrigeration system,Control system and CIP cleaning system. The tank of the system all adopts SUS 304,and the system also have high automatic control capacity. Technical specification: Outside surface:S.S.304,THK:1.5-4mm Inner surface:S.S.304,THK:2mm-4mm Top shape: Seal head or conical head Heating method:Natural gas/electricity/LPG/direct fire Insulation layer: Protected by polyurethane ,THK:80 mm Polishing precision: �0.4µm Manhole: Side upward Spral ball: In the center of the inside tank Agitator: Raking system conneted into a top reducer Chimney: On the top of the tank Processing: Argon-arc welding Business Partner Wanted: We are finding business partners all over the world to sell our brewery lines. If you are interested in this brewery industry scope of business in your local place, please contact us for any further information you may need.

Name:Warsteiner Premium Beer 4,8% â?? 24x500ml Can Number:13997 Pieces per pallet:72 EAN:4000856003404 Product category:Beer Case (sales unit):Tray Cases per layer:9 Packaging:Tray

1.Technical parameters: Body: Brass Operating temperature: 0-100 degree centigrade Operating pressure: 0,5Mpa thread: G5/8 2. brass keg coupler with stainless steel handler G type is elegantly designed.Technical parameters: Body: Brass Operating temperature: 0-100 degree centigrade Operating pressure: 0,5Mpa thread: G5/8 3.Cleaning Notes: cleaning the surface with mild soap water, and then thoroughly wipe the entire surface with a clean soft cloth. 4.The shell adopts hot forging process, the internal grains are refined, and the corrosion resistance of the parts is greatly improved. 5.Product surface after shot peening, effectively removed the internal stresses producted by hot forging, meanwhile improving the appearance of the surface aesthetics. 6.Products sealed by natural rubber injection molding, in line with the drinking water standards, will not cause secondary pollution of beer , to keep beer pure hygiene, health security .

The traditional two vessel brewhouse configuration is mash tun / lauter tun + kettle / whirlpool combined, which is more used for brewers from North America for infusion brewing. The brewhouse following exact building requirement and the exact beer gravity from different investors. Piping works for the brewhouse is easier but more professional to make sure there is less wasting and everything following customers brewing recipe requirement. Making a brewery is longer term operation, our wish is helping you find the value behind our price, and develop the balance between income and investments.

The traditional two vessel brewhouse configuration is mash tun / lauter tun + kettle / whirlpool combined, which is more used for brewers from North America for infusion brewing. The brewhouse following exact building requirement and the exact beer gravity from different investors. Piping works for the brewhouse is easier but more professional to make sure there is less wasting and everything following customers brewing recipe requirement. Making a brewery is longer term operation, our wish is helping you find the value behind our price, and develop the balance between income and investments.

1. Technical parameters: Body: Brass Operating temperature: 0-100 degree centigrade Operating pressure: 0,5Mpa thread: G5/8 2. brass keg coupler without vent vale S type.Technical parameters: Body: Brass Operating temperature: 0-100 degree centigrade Operating pressure: 0,5Mpa thread: G5/8 3.Cleaning Notes: cleaning the surface with mild soap water, and then thoroughly wipe the entire surface with a clean soft cloth. 4.The shell adopts hot forging process, the internal grains are refined, and the corrosion resistance of the parts is greatly improved. 5.Product surface after shot peening, effectively removed the internal stresses producted by hot forging, meanwhile improving the appearance of the surface aesthetics. 6.Products sealed by natural rubber injection molding, in line with the drinking water standards, will not cause secondary pollution of beer , to keep beer pure hygiene, health security .

1.The shell adopts hot forging process, the internal grains are refined, and the corrosion resistance of the parts is greatly improved. 2.The product surface has been polished 6 times of buffing, and the polishing part ensures no visible defects. 3.Product surface treatment : using thickened PVD plating, with strong corrosion performance 4.Cleaning Notes: cleaning the surface with mild soap water, and then thoroughly wipe the entire surface with a clean soft cloth. 5.Material: zinc alloy

1.Material: zinc alloy 2.The shell adopts hot forging process, the internal grains are refined, and the corrosion resistance of the parts is greatly improved. 3.The product surface has been polished 6 times of buffing, and the polishing part ensures no visible defects. 4.Product surface treatment : using thickened PVD plating, with strong corrosion performance 5.Cleaning Notes: cleaning the surface with mild soap water, and then thoroughly wipe the entire surface with a clean soft cloth.

1.Cleaning Notes: cleaning the surface with mild soap water, and then thoroughly wipe the entire surface with a clean soft cloth. 2.Material: zinc alloy 3.The shell adopts hot forging process, the internal grains are refined, and the corrosion resistance of the parts is greatly improved. 4.The product surface has been polished 6 times of buffing, and the polishing part ensures no visible defects. 5.Product surface treatment : using thickened PVD plating, with strong corrosion performance

1.Hot Tags 2.stainless steel, beer tower, China, manufacturers, factory, wholesale, cheap 3. Material: Stainless steel body chrome plated. PU material inlet beer tube and circulating cooling tube. Thread specification: G5/8 screw thread with tap. 4.The role of the circulating cooling tube is to better maintain the effect of the beer refrigeration. The beer machine pump extract the ice water into the circulation tube, which makes the beer in the beer tube refrigerated better. 5.This beer tower also has the insulation pipe to has the effect of heat insulation.