Please click here to check who's online and chat with them.

Find Verified Titanium Alloy Suppliers, Manufacturers and Wholesalers

GOLD Member
Feb-18-21
Alloy Ingots ADC12

Alloy Ingots Adc12

(4.5)
$80.00
MOQ: Not Specified
  Soupin Jean Stephane
Supplier From Saint-Paul, France
Supplier Of Metal Alloys
 
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)

1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;


2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.

Every lot of production need to do testing .


3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.


4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500


5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
GOLD Member
Dec-08-20
Tin Ingot 99.9%

Tin Ingot 99.9%

(4.5)
$800.00
MOQ: Not Specified
  Soupin Jean Stephane
Supplier From Saint-Paul, France
Supplier Of Titanium Ingot
 
Description
1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration.
2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal.
3. Good oxidation resistance, low tin slag and cost savings.
4. Solder joint is bright, full and uniform.
5. Economical and can produce the lowest consumption of the solid solder joints.

Application
Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.
May-25-21
Titanium Blocks

Titanium Blocks

(1.1)
$100.00
MOQ: Not Specified
  A Trading
Supplier From Libourne, Gironde, France
Supplier Of Titanium Products
 
Description Titanium block/ingot/billet
Material Gr1 Gr2 Gr3 Gr4 Gr5 Gr6 Gr7 Gr9 Gr11 Gr12 Gr23 Ti15333 BT1-00 BT1-0 BT1-2
Standard ASTM B381,ASTM F67,ASTW F136
Size customed
MOQ 1kg
Property high strength fine corrosion resistance low density and low weight
Tehnique Forging ,Machining
Application 1. Low Density and High Specification Strength
2. Excellent Corrosion Resistance
3. Good Resistance to Effect of Heat
4. Excellent Bearing to Cryogenics Property
5. Nonmagnetic and Non-toxic
6. Good Thermal Properties
7. Low Modulus of Elasticity
GOLD Member
Mar-02-21
Self-contained Breathing Apparatus

Self-Contained Breathing Apparatus

(4.5)
$450.00
MOQ: Not Specified
  Soupin Jean Stephane
Supplier From Saint-Paul, France
Supplier Of Fitness Equipments
 
Product Name
Self-contained positive pressure air breathing apparatus with Electronic pressure gauge
Material - Alloy steel
Color - Black and White
Standard - EN 136
Cylinder volume - 6L
Working hours - 55-60mins
Working pressure - 30Mpa
Used - Firefighting
GOLD Member
Dec-08-20
Purity Lead Ingot 99.99%

Purity Lead Ingot 99.99%

(4.5)
$700.00
MOQ: Not Specified
  Soupin Jean Stephane
Supplier From Saint-Paul, France
Supplier Of Metal & Metal Products
 
Metal tin is mainly used in the manufacture of alloys.
Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment.
Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials.



Standard
ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 ,

Content
Pb â?¥ 99.99 %

Density
11.34 g / cm 2

Color
Bluish

Weight
35 kgs / lump, 55 kgs / lump

Dimension
21" x 4" x 2.5"

Package
Standard Sea-worthy package, fixed by belt per ton

Shape
Rectangular Lump


Application

lead-acid storage batteries
Ammunition, cable sheathing, and building construction materials
counterweights, battery clamps

cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil

Container Size

20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter
40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter
40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter
32 Titanium Alloy Suppliers
Short on time? Let Titanium Alloy sellers contact you.
GOLD Member
Dec-08-20
Antimony Ingots 99.99%

Antimony Ingots 99.99%

(4.5)
$20.00
MOQ: Not Specified
  Soupin Jean Stephane
Supplier From Saint-Paul, France
Supplier Of Metal & Metal Products
 
1,Hight prurity (99.99% min) Metal Antimony (Sb)

2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999%
3,Lumps/Ingot/Granule/Bar
4,Color: Gray

5,Atomic weight: 121.760

6,Electronegativity: 2.05

7,CAS No.: 7440-36-0

8,Density: 6.697 g/cm3 (25â??)

9,Melting Point: 630.63 â??

10,Boiling Point: 1587 â??

11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
GOLD Member
Nov-19-20
Copper Wire Scrap

Copper Wire Scrap

(4.5)
$900.00
MOQ: Not Specified
  Soupin Jean Stephane
Supplier From Saint-Paul, France
Supplier Of Copper Wire Scrap
 
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%.
Cu%: 99.9%
Element...0.005... (%)
Copper..99.9... % (Min.)
Lead...0.005.... % (Max.)
Bismuth...0.5..% (Max.)
Total impurities...0.3..% (Max.)

Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%).
Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed
copper wire and cable, not smaller than No. 16 B & S
wire gauge, free of burnt wire which is brittle
GOLD Member
Nov-19-20
Millberry Copper Scrap 99.99%

Millberry Copper Scrap 99.99%

(4.5)
$900.00
MOQ: Not Specified
  Soupin Jean Stephane
Supplier From Saint-Paul, France
Supplier Of Copper Wire Scrap
 
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%.
Cu%: 99.9%
Element...0.005... (%)
Copper..99.9... % (Min.)
Lead...0.005.... % (Max.)
Bismuth...0.5..% (Max.)
Total impurities...0.3..% (Max.)

Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%).
Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch
Shall consist of clean, untinned, uncoated, unalloyed
copper wire and cable, not smaller than No. 16 B & S
wire gauge, free of burnt wire which is brittle
Sep-24-19
(1.3)
Supplier From France, France

Aluminum alloy.

Supplier Of Aluminium Alloy
Nov-23-20
(1.3)
Supplier From France

Nickel alloy wires.

Supplier Of Nickel Alloy   |   Nickel Wires
Aug-19-09
(1.3)
Supplier From Saint Ouen Laumone, France

Tungsten powder, heavy alloy, carbide rods, blanks inserts, tungsten seals.

Supplier Of Metal Alloys   |   Tungsten Products
Jan-06-25
(1.0)
Supplier From France

Chemical like titanium dioxide rutile tio2.

Supplier Of Titanium Dioxide   |   Industrial Chemicals
Jan-18-13
(1.3)
Supplier From Rieux, France

Copper and copper alloys (brass, bronze) and aluminum strip , single and dual gauge copper strips for power electronic industry.

Supplier Of Copper Alloy   |   Copper Strips   |   Aluminum Strips
Dec-14-04
(1.3)
Supplier From Kuala Lumpur, France

Steel scrap , used rails.Brokerage

Supplier Of Steel Alloy Scrap   |   Steel Scrap   |   Steel Scraps

Service Provider Of Brokers/Commission Agents   |   Metal Scraps
Aug-17-05
(1.3)
Supplier From Villepinte, France

Aluminum, copper, urea, steel scrap hms1.

Supplier Of Steel Scrap   |   Metal Scraps   |   Copper   |   Steel Scraps   |   Urea   |   Steel Alloy Scrap   |   Aluminum
Dec-28-22
(1.0)
Supplier From Bordeaux, Gironde, France

Rare, Strategic And Critical Metals :
Tungsten, Certain Rare Earths (praseodymium, Neodymium And Dysprosium), Cobalt, Copper, Chromium, Nickel, Molybdenum, Titanium, Lithium, Tantalum, Beryllium And Certain Platinoids (platinum, Palladium And Rhodium) ..

Supplier Of Tantalum   |   Chromium   |   Magnets & Magnetic Products   |   Copper   |   Lithium   |   Cobalt   |   Tungsten Products   |   Ores & Minerals   |   Earthing Equipments   |   Nickel   |   Titanium
Aug-04-19
(1.1)
Supplier From Saint Denis, Ile De France, France

Cereals, oilseeds, nuts, scrap,factory waste for animal feed, animal by product, blco bonny light crude oil, grains and pulses.Shipping

Supplier Of Copper Scrap

Service Provider Of Shipping, Air, Cargo & Railways   |   Cashew Nuts   |   Copper Plate Scrap   |   Crude Oil   |   Oil Seeds   |   Animal & Cattle Feed   |   Steel Alloy Scrap   |   Steel Scraps   |   Pulses   |   Copper Scrap   |   Dry Fruits & Nuts   |   Metal Scraps   |   Grains & Cereals   |   Spices
Feb-07-06
Round die stocks

Round Die Stocks

(1.3)
Ask for price
MOQ: Not Specified
  Arden Diffusion-Grolaire tools
Supplier From Harreville Les Chanteurs, France
Supplier Of Tools & Instruments
 
Round die stocks : one two & five screws in 3 versions:
1/ all steel and iron forged
2/ steel handles & light alloy body
3/ All light alloy
Diameter range: 20.6 to 101.6 mm
Specific colors upon request
Feb-07-06
Adjustable Tap wrenches

Adjustable Tap Wrenches

(1.3)
$2.50
MOQ: Not Specified
  Arden Diffusion-Grolaire tools
Supplier From Harreville Les Chanteurs, France
Supplier Of Tools & Instruments
 
Two versions:
1/ All steel and Iron forged
2/ Steel handles & light alloy body
Size range: 130 to 1250mm length
Specific colors upon request
Aug-17-20
Aluminum Extrusion 6063

Aluminum Extrusion 6063

(1.3)
$900.00
MOQ: Not Specified
  Horus Incorporation
Supplier From France, Ile De France, France
Supplier Of Aluminum Hardwares
 
The strength of 6063, as extruded, is somewhat higher than that of 3003. It can be precipitation heat-treated to strengths just under 6061 alloy and it can be welded. It is primarily used in extruded shapes for architecture, particularly window frames, door frames, roofs, and sign frames.
Application : Foundry Industry
Features : High Durability
Al Content (%) : 99%, 99.9%
Color : Original
32 Titanium Alloy Suppliers
Short on time? Let Titanium Alloy sellers contact you.
No Time to Search? Post Your Buy Requirement to Suppliers Worldwide.
go4WorldBusiness +91-89298-00770 52B, First Floor, Okhla Phase-3 New Delhi, INDIA 110020
© go4WorldBusiness.com