Description Titanium block/ingot/billet Material Gr1 Gr2 Gr3 Gr4 Gr5 Gr6 Gr7 Gr9 Gr11 Gr12 Gr23 Ti15333 BT1-00 BT1-0 BT1-2 Standard ASTM B381,ASTM F67,ASTW F136 Size customed MOQ 1kg Property high strength fine corrosion resistance low density and low weight Tehnique Forging ,Machining Application 1. Low Density and High Specification Strength 2. Excellent Corrosion Resistance 3. Good Resistance to Effect of Heat 4. Excellent Bearing to Cryogenics Property 5. Nonmagnetic and Non-toxic 6. Good Thermal Properties 7. Low Modulus of Elasticity
Description 1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration. 2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal. 3. Good oxidation resistance, low tin slag and cost savings. 4. Solder joint is bright, full and uniform. 5. Economical and can produce the lowest consumption of the solid solder joints. Application Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
1.dry charged battery & MF battery 2.Meet all DIN & JIS standard 3.Powerful quick start & long life 4.1-2 year used car scrap battery 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. Monthly Supply Capacity: 500 - 1500 metric tons, Type: all kind of scrap batteries, Fe Content: HMS Fe Content (%): 100%) Drained Battery Scrap: Black Packaging Detail: Pallet with shrink wrapping
Thickness: 0.03-0.20mm Width: 20mm-1580mm length: 50-2000m/roll (as per customer's requirement) Peel strength: 20-400g/25mm Elongation at break: Machine direction: 180% Transverse direction: 380% Tensile strength: 10MPa Color: Transparent(as per customer's requirement) Backing: PE film Adhesive: acrylic
Model Number - GB/T1196-2002 Type - Aluminum Can Weight - 25kg Al Content (%) - 99.99% Product Name - Pure Aluminum UBC Scrap Materials - Used Beverage Cans Color - Multi Color Al (min) - 99%-99.97% Grade - AA; Typical Chemical Composition - Al, Cr, Cu, Fe, Mg, Mn, Si, Ti, Zn Density - 2.7 g/cc Ultimate Tensile Strength - 241 MPa Quality - Cans are free from dirts, dusts, water and oil
- Temper : 'O' 1/2 H - Tensile Strength : 340 Min-400 Min - Elongation % on 50 mm G.L : 40 Min - Vickers Hardness VPN : 80 Max/95 Min-120 Min -Cu -: 58% - 60% -Pb -: 1.5% - 2.5% -Imp -: 0.3% (Max.) -Zn -: Remaining Consist of: doors and windows Profile frame Our Brass Honey Scrap consist of Faucet scrap, scrap of machinery parts, plated brass, etc
Brand Name - Aluminum Engine Scrap Model Number - GB/T1196-2002 Type - Aluminum Tense Weight - 25kg Al Content (%) - 99.99% Product Name - Aluminum Engine Scrap Material - Car Engine Color - Silvery White Metal Al (min) - 99%-99.97% Grade - AA; Typical Chemical Composition - Al, Cr, Cu, Fe, Mg, Mn, Si, Ti, Zn Source - All Car Engine Brands Alloy or not - Alloy Quality - Engines are free from dirts, dusts, water, grease and oil Features Free from Nuts, Steel plate, paints
Thickness as your request 2mm,3mm,4mm,5mm,6mm Size We can build 2M3, 3M3, 4M3, 5M3 6M3 ,8M3, 9M3, 10M3, 12M3 Skip bin and customized bin is available Painting we provide priming painting color,and the final color according to customers' demand, enhancing your company image with great looking bins. Options 1.Prefabricated with top coat finished 2.Prefabricated and hot dipped galvanized 3.Flat packed with premier only 4.Fork slot under floor or inside bins 5.Other requirements like thickness, different steel grade used
Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% Grade : AA Product Origin ; Netherlands/ Romania Metal : 100% Alloy Or Not : Non-Alloy Color : Multiolor Secondary or not : Non-secondary ed Rails R-50: 51.67 Kg/m �¢?? GOST-7173-75 R-65: 64.72 Kg/m �¢?? GOST-8165-75 Metal : Nonferrous Metal Length : 1meters, 1.5 meters (ideal for melting) 6 meters 12 meters full length (ideal for piling)