grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
Model Number: 314 321 441 430 Type: plate Application: decoration Certification: ISO Tolerance: 1% Processing Service: Bending, Welding, Decoiling, Punching, Cutting Product name: aisi 314 321 441 430 stainless steel sheet Surface: 2B, NO.4 HL available Technique: Cold Rolled Finish Material: Stainless Steel Color: Natural Color Edge: mill Edge/ slit edge Item:ISO9001 Standard Packing: Standard Export Packing Ni:min1%
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
Second Quality Railway Steel HMS2 R50/R65 CODE 730 210 000 000 The rails are brand new and only called used rails because of their anomalous sizes. The rails are cut in different sizes, as they did not pass the test of conformity of measurements due to inequalities. Therefore, rails are not suitable as railway track, but not classified as scrap. we can also provied : rebar steel hot rolled steel sheets Galvanized steel billet steel cold steel Rolled sheets procedure : 1/ Buyer send LOI to the seller. LOI must be from the end buyer and indicates inside the payment method chosen below. 2/Seller issues FCO (available 7 days) 3/Buyer signs FCO and accepts fees proforma invoice indicates all the transaction details agreed after in the SPA and it's the document needed by buyer when start the processus for issuing the deal. 4/Buyer pays fees 1340 $ per ONE million ton to the seller to issu a commercial invoice, please note this amount is refundable after acceptance of the LC by the seller's bank. 5/Paiement terms : By issuing a confirmed LC MT 700 with full amount (confirmed, not delay and irrevocable), as per the proforma invoice�¢??s terms and conditions by the buyer. or issuing a revolving LC MT 760 with the bank guarantee to take all the quantity states on the proforma invoice has to be not less than 20 % of the value of the proforma invoice. Possibility to negociate with DLC. 6/ Seller issues a SPA the buyer must be returned ywith 7 days. 7/ in case of requesting any documents, inspection certificate, etc. property rights, inspection of the goods, requesting a visit or video, the buyer can claim them by sending pre-advice bank draft MT 705, OR among the conditions of the letter of bank credit, confirmed bank, with the full value of the proforma invoice and its conditions
pellet machine, with the advantages of low noise, easy and stable operation, high automation, can make pellet dia size from 6mm to 12 mm and the output capacity from 1.5t/h to 2.5t/h. We can offer you the complete solution for making pellets, from crushing, drying to pelletizing. Features : 1. This machine adopts gear first stage driving system, with ideal drive ratio and enormous driving force, its transmission us stable with low noise, operate simply, no blocking is happened to the machine easily. 2. The maximize design if pinch roller can lower the requirement to moisture content of materials in particle molding. 3. The motor and gear cases are installed at the heavy pedestal, pin coupling is used to realize direct connecting, which can exempt from foundation installation and easy to repair and maintain. 4. The machine is equipped with patented water circulation; the cooling system can be used to control the temperature rising of each part efficiently, to guarantee the continuous, stable, reliable running of the machines. 5. The machine adopts advanced variable frequency motor to feed, which equipped with overload intelligent protection.
Heavy machinery.Heavy machinery, industry, agriculture
Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter
1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
Application: Electric light industry, Machinery manufacturing, Building industry ,defense industry, Other fields Manufacturing industrial .valves and fittings,Instrument sliding bearing. 1.purity 99.97%-99.99% 2.Weight of each sheet: 125kgs (+/- 1%) 3.Net weight of each pallet: 2mts (+/- 1%) 4.Min. weight in each container: 20mts approx. 5.Gross weight of each container: 22.20mts approx. 6.Dimensions: 914*914*12mm Product: Copper Cathodes Grade A (Electrolytic Copper Grade) (LME standards) Standard Cu Cathode-1, purity 99. 99% Dimension: 970 MM X 970 MM X 9 MM Weight of each sheet: 100 kg. we can supply copper cathode Copper Cathode Grade A Purity: purity 99.99%-99.97% min Weight per Sheet:125kg....... Copper Cathode , Cu 99.95% Copper cathode Grade A Cu 99.95- 99.99 % 1.Weight of each sheet: 125kgs (+/- 1%) 2.Net weight of each pallet: 2mts (+/- 1%)
Appearance - Black Powder Particle size - 5-10 um Surface area - 2000 m2/g C content - >95%
(1)Appearance: Pale Yellow, Viscous Clear Liquid (2)F.F>A.( as oleic), w% 1.00 Max (3)Packing 21.5 Mts Appearance - Pale Yellow, Viscous Clear Liquid m.I.V, w% - 0.25 Max F.F>A.( as oleic), w% - 1.00 Max Acid Value, mgKOH/g - 2.00 Max Iodine Value, mgKOH/g - 82-90 Saponification value, mgKOH/g - 177-185 Hydroxyl value, mgKOH/g - 160 Min Stokes - 6.3-8.9 Insoluble impurities - 0.02% Ricinoleic Acid - 85% Min Colour on Loyibond in 5.25 Cell -20.0 Max R-2.0 Max
Particle Size(mesh) - 4-8, 5-10, 6-12, 10-24, 8-30, 20-40 Packing Density (g/ml) - 0.45-0.55 Hardness (%) - 95 Ash Content (%) - 5 Moisture (%) -10 Iodine Value (mg/g) - 900-1250 PH - 6-9 Packaging Details 25kgs/bag, or 500kg/big bag
Appearance: Pearl Purity: 99% Boiling point: 1390 c Melting point: 318.4 c Density: 2.13g/cm3 NaOH 99% Min Na2CO3 - 0.8% Max NaCl - 0.1% Max Fe2O3 - 50 ppm Max
Material ASTM A53, A106, A210, A252, A333 Grade Q195 SS330,ST37,ST42 Q235 SS400,S235JR Q345 S355JR,SS500,ST52
Material : Stainless Steel 304 Type : Welded, Decorative Surface Treatment : Mirror:600G/800G Satin:180# 240#/ 320# /400# Thickness :0.3~2.0mm Length : 5.8meter/ 6.0meter/ 6.1meter or customized Regular Shape :Round/ Square/ Rectangle/ Oval -Click here to see all sizes Slotted Pipe : Double slotted/ Single slotted Tolerance : Out diameter: 0.2mm/ Thickness: 0.03mm ; Length: 10mm/ Weight OR Qty:15%
1). Size: 25mm*25mm-250mm-250mm 2). Wall thickness: 1.5mm-25mm 3). Length: 1m-12m 4). Grade: Q195, Q235, Q345,SS400,SS540, S235JR, A36 etc 4). Certificate: ISO 9001-2008 5). Packing: Standard exporting package. 6). Delivery: Within 20 days after receiving the deposit. 7). Application: Framework of all kinds of construction and engineering; Construction joint ;Iron tower; Derrick frame ; Building structures, such as beams, bridges, transmission towers, lifting or transporting machines, shipping, industrial boilers ,product according to your needs.
Electro welded wire mesh supply In the forms of rolls or panels, for construction, fences and other industrial uses. It enjoys the feature of corrosion resistance, compared with plain welded wire mesh. Mainly used as fencing panels or further fabricated into wire partitions, wire container panels, wire baskets, welded wire fences, poultry fences and other welded products. Type: Electric Wire Mesh Application: Fence Mesh Hole Shape: Square Wire Gauge: 2.0-4.0mm Processing Service: Bending, Welding, Cutting Product name: welded wire mesh Wire diamter: 0.6-5 mm wire space: 50-300 mm Surface treatment: galvanized, PVC coated Width: 500-1500 mm Length: as request Factory certification: ISO 9001
Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry for reinforcing concrete(Express way; office building, Bridge etc) Transportation By sea(20' 40' container)
Metal base - Cold rolled steel coil Thickness - 0.14mm-1.2mm Width - 600mm-1250mm Coil ID - 508mm,according to request Zinc Coating - 40-275g/m2 Coil weight - 3-5 tons,according to request Finish - Hot dipped galvanized Hot sale size -750mm,762mm,800mm,900mm,914mm,1000mm,1200mm,1220mm,1250mm
Diameter 5.5MM-50.0MM Coil Weight - 2 tons around SPEC - SC/SCR/SCM/HIGH CARBON
