Material Avaliable Steel, Stainless Steel And Brass Advantages 1.install Sleeve Nut To Access Front Side Of The Work Piece & Screw In From Back Side. 2.install Without Any Complicated Tool At Any Location On The Assembly. 3.install Without Producing Any Harmful Mark. 4.install Into Varies Material. 5.the Fangs On The Body Cut Into The Application During Assembly. 6.easy, Fast & Safe Installation. Instructions Of E-self Driving Nut As The Sleeve Nut Is Stalled, The Fangs On The Body Actually Cut Into The Application & Provides Grip Strength. When Screw On The Opposite Side Have Driven, The Fangs Will Grip Application Tightly.
The primary purpose of Jack Nut is to provide increased fastening strength or a secure anchor point in thinner materials. When using a jack nut, it is inserted into a pre-drilled hole and then expanded by rotating the threads, causing the insert to grip the material. This allows for the creation of a strong anchor point for screws or bolts in thinner materials without the need to penetrate the entire material.
Features 1.Superb Pull-out Strength, Exceptional Torque. 2. Wide Grip Range. 3.Fastens Securely In Uneven Surfaces. 4.Installs Cleanly Without Distort, Deform Or Damaging Parent Material (ex. Soft Plastics, Thin Sheet Metal). 5.The Four Legs Are Pulled Together Expanding Outwards Behind The Surface Material To Provide A Large Load Bearing Area. 6.SPECIFICALLY DESIGNED FOR USE IN SOFT AND BRITTLE MATERIALS, SHEET METAL, FIBERGLASS, PLASTICS AND COMPOSITES. APPLICATIONSï¼? 1.AEROSPACE (E.G., INSTRUMENT PANEL, SEATBELT) 2.Automobiles And Motorcycles Parts And Moldings (E.G., Car Top Carriers) 3.SUITABLE FOR OUTDOOR FEATURES FOR BLIND JACK NUT: 1.FASTENS IN BLIND HOLES 2.FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES 3.Trucks And Trailers Sandwich Sections And Panelling. 4.DOMESTIC APPLIANCES HANDLES, ADJUSTABLE FEET AND FIXING POINTS. 5.PLASTIC FABRICATIONSï¼?ELECTRONICS, ENCLOSURES...ETC. OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
MATERIALS ARE AVAILABLE FOR BOLT RIVET NUT: STAINLESS STEEL 302/304 (A2/18-8), 316(A4/18-10), STEEL, ALUMINUM 5056/6061, BRASS C2600 CHARACTERISTCS OF BOLT (SCREW) RIVET NUT: 1.EASY AND FAST IN INSTALLATION WITH HANDY TOOL. 2.PROVIDES HIGH TORQUE AND STRONG THREADS IN COMPARING WITH NORMAL FASTENERS. 3.WELDING PROCESS IN NOT REQUIRED IN INSTALLING BOLT (SCREW) RIVET NUT. 4.ABLE TO REDUCE ASSEMBLING TIME AND IMPROVE OUTPUT. 5.ABLE TO PROVIDE A STRONG BINDING SUPPORT ON COMBINATION APPLICATIONS. 6.WILL NOT LOOSEN FROM VIBRATING OBJECTS ONCE ITS' INSTALLED. 7.BOLT (SCREW) IS ALREADY COMBINED WITH BLIND RIVET NUT BEFORE INSTALLATION, SO IT IS NOT NECESSARY TO INSTALL THE SCREW ON THE BLIND RIVET NUT. 8.COMBINED RIGIDLY TO SUIT VIBRATING ENVIRONMENT. 9.AVAILABLE IN BOTH UNC AND ISO DIMENSION. â?? OTHER SIZES AVAILABLE: NOTE 1: GRIP RANGE CAN BE AFFECTED BY PARENT MATERIAL DENSITY AND ACTUAL HOLE SIZE. WE SUGGEST TRIAL INSTALLATIONS TO DETERMINE OPTIMUM GRIP. NOTE 2: ADDITIONAL UNF FINE THREADS, GRIP LENGTHS AND MATERIALS ARE AVAILABLE. PLEASE CONTACT TOP SCREW METAL CORP. FOR MORE DETAIL. THREAD SPECIFICATION: Unified - 2A/21 per ASME B1.1 Metric 6g/21 per ASME 1.21M
Home Products Threaded Insert/blind Rivet Nut Knurled Threaded Insert( Nut Insert ) Knurled Threaded Insert( Nut Insert ) 1 KNURLED THREADED INSERT ( Nut Insert ) Top Screw ST series Threaded insert is designed to be installed in the small space. The body length after riveting is shorter than any standard type of blind rivet nut. The head of insert can press tightly against surface of application. ST series can be installed on application which the thickness is thicker than 0.03â?? (0.76mm) and the application can be most any type of material. The material for ST series can be Steel and Stainless Steel. Further information about recommended hole size, grip range and application thickness. Please refer below table. APPLICATIONï¼? ST series Threaded insert is commonly used in any industry including automobile industry. MATERIAL AVALIABLE STEEL OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
Sus Gourd Nuts : Material: Stainless steel applicable Specifications: According hydraulic pipe outside diameter selected with use. Existing specifications: 5.0mm
Gourd Head Nuts : Material: 1. Stainless steel; 2. Aluminium Applicable specifications: Choose and match according to the outer diameter of the oil pressure pipe. Existing specifications: 5.0mm/5.4mm
Nuts.
Item Name: NUT, PROPELLER 369-64121-0 / 369641210M OEM NO.: 369-64121-0 / 369641210M FOR TOHATSU/NISSAN 4, 5, 6, 8, 9.8 HP FITS: 2002 AND EARLIER NS15D ASSEMBLY KIT 2003 NS15D2 CARBURETOR FUEL FITER Etc.
Available Now Cashew Nuts Grade: WW180 / WW240 / WW 320 Cultivation Type: Common Moisture: Dried 5~7% max Packing: Vacuum bags 11.34kgs/Box,2Boxes/Cartons, 700 Cartons/20 FCL Capacity: 100 Ton / Month for more details, please contact : Khalid
Oil Filling Adapter M4 : Material: Copper Specification: Copper M4 Oil Filler (Silver Plating)
Oil Filling Adapter M3 : Material: Copper Specification: Copper M3 Oil Connection (Silver Plating)
Oil Filling Adapter M2.5 : Material: Copper Specification: Copper M2.5 Oil Filler (Silver Plating)
Please send us your engineer requirement, we will provide you factory price list.
Nuts: Hex nut, hex heavy nut, hex jam nut, dome cap nut, nylon insert nut, nylon insert lock nut, weld nut, long nut, square nut, loosproof nut, wing nut, special nutík Dia.: from m1.6~m50, #1~2-5/8í¿ Standard export packing
We will response you any questions during 24hr
1.Pierce nut class range is from 8 to 9. 2.Thread size 6H/6E, metric or 2B standard. 3. Pange of thread: M4-M12. 4. Plating is available by customer request, e.g. S437, S438,S439, MFZN2C, GM6076, BROSE, ZINC, ZINC TRI CLEAR. 5. We can supply a full installation tooling & replacement parts. Standard Packs available: 13¡¨ spool=5000pcs / 10¡¨ spool=2500pcs
Various of screws, it can be used to machine parts, bicycle parts and medical machine parts, we also have the cnc process technology. As the customer's need
We provide fastener from taiwan, advantage from sub-contract system to bring cost effective and on-time products to customers. Specialized fastener or part per drawing we are able to produce through cold-forming technology. 1/4 standard carton w/ lable
Shining Jins Enterprise Co., Ltd. engaged in manufacturing and supply precision, high quality cold forged and machined parts to numerous markets in Taiwan.
