Find Verified Footwear Machinery Suppliers, Manufacturers and Wholesalers

Cutting capacities:
Cutting capacity 90° (flat):10x11 "
Cutting capacity 90° (round):11 "
Cutting capacity 90° (square):11x11 "
Stop length:20 "
Cutting speed:780 - 3,900 "/min
Working area:
Roller guide length:47 "
Feed rollers:4 positions

Drive capacity:
Motor rating main drive:2 Hp
Motor rating hydraulic pump:0.5 Hp
Motor rating feed:0.3 Hp
Motor rating coolant pump:0.2 Hp

Measures and weights:
Belt dimensions:1.06x0.04x133.86 "
Overall dimensions:71x33x47 "
Weight:1,320 lbs.

Working area:
Travel X-axis:118 "
Travel Y-axis:59 "
Travel Z-axis:5 "
Cutting speed:0 - 234 "/min
Machining table height:38 "
Rapid feed:591 "/min

Accuracies:
Positioning accuracies:± 0,02 mm / 0.0008"
Repeatabilities:± 0,02 mm / 0.0008"
Power supply:400 V / 50/60 Hz / 60 A
Laser type:Nd: YAG
Laser exciter:Xenon-Lampe
Mean laser power (max.):600 W
Pulse frequency:1 - 450 Hz
Cutting gas:Luft / O2 / N2
Power consumption (laser):< 20 kW

Measures and weights:
verall dimensions:165x197 "
Weight"9,240 lbs.

Detailed Product Description

1)Cable tray roll forming machine
2)Thickness:1-2mm
3)Drive type:gear box
4)Forming speed:10-15m/min
4)Certification:CE


Cable Tray Roll Forming Machine

1.Forming processing

Uncoiler-flatting-clamp&punchine-positioning cutting-forming-collection

2. Equipment capabilities
1). width of raw materail : 60mm- 860mm

2). Product speed by punching: 2.5-5m/min
3). Continuous roll forming speed: 10-15m/min
4). Material thickness: 1-2mm
5). Material require: Q235 cold roll steel
6). Production line has automatic and manual two operating mode, may realize the linkage and the partition revolution work.

3. Main composition of machine
This unit consists of the decoiler, ML900 flatting, 200 punch, punching die, servo feeding, guider, main roll forming machine, follow cutting, cut-to-length part, electrical control cabinet; etc.


4. Each part major technical parameters
4.1 Drive decoiler
1). Material width 860mm
2). Material weight 6000kg
3). Material outer diameter 1200mm
4). Drive power: Electromotor and speed reducer integration, 4KW frequency conversion electromotor
5). Frame type: Cantalever inner support, manual handle afterbody, pneumatic press cantalever.

4.2 Flatting
1) Working rolls: 11 rolls, up 4/down 5, the residual 2 rolls is clamp deliver rolls.
2) Flatting bound: Material thickness 1-2mm, material width 100-860mm
3) Drive power: 5.5kw frequency conversion electromotor
4) Speed reducer model: ZQ250
5) Flatting speed: 3-10 m/min
6) Parenthesis up and down a pair of fortified wheel

4.3 Continual punching mould
1. Amount: Each kind of width specification 1 set dies, total 6 sets
2. Die require: Cr12 quench

4.4 Servo feeding
1. electromotor power: 4.4kw
2. Multistage type feeding, memory ten group of memory functions
3. Man-machine contact surface numerical control system
4. Uses Mitsubishi servo meter

4.5 Holds material (use in cushion section)
The roller type, the both sides have the bearing support, 3 sets, use in holding the material and under the deposited material spacing

4.6 Guider
A pair of horizontal roller and two pairs of vertical guide rolls, total 1 sets.

4.7 Main roll forming machine.



Type
GY180(Extra wide)

Rack structure
Dragon Gate type memorial arch frame

Forming frame
16 sets

Forming variety
Bridge frame

Material max width
860mm

Material max thickness
¡Ü 2.0mm

Forming width
100-900mm

The diameter of the roller axis
85mm

Roll mould material
Gcr15

Quenching treatment
HRC58-62

Drive type
30kw frequency conversion electromotor


4.8 Hydraulic cutting
1. Hydraulic pumping station: 5.5kw
2. blade material : Cr12, quench treatment

4.9 Electrical control
4.9.1 Main operation control cubicle
1) Amount: 1 set
2) Frequency conversion: 3 sets(in main control cubicle, control decoiler, flatting and roll forming machine)
3) PLC control: 1 set
4)8 inch liquid crystal touch screens
5) All electrical element is the Mitsubishi original installation brand

4.9.2 assistant control cubicle
Amount: 3 sets (follow decoiler, flatting, roll forming machine)
Control type : Manual handle

5. After-sale service
1. We see to the equipment's installment, the debugging and free training operators
2. We offer the equipment's details(including the drawing of roll forming mould, Electric appliance schematic diagram, equipment diagram and so on).

Detailed Product Description

1)Cable tray roll forming machine
2)Thickness:1-2mm
3)Drive type:gear box
4)Forming speed:10-15m/min
4)Certification:CE.

1.Forming processing
Uncoiler-flatting-clamp&punchine-positioning cutting-forming-collection

2. Equipment capabilities
1). width of raw materail : 60mm- 860mm

2). Product speed by punching: 2.5-5m/min
3). Continuous roll forming speed: 10-15m/min
4). Material thickness: 1-2mm
5). Material require: Q235 cold roll steel
6). Production line has automatic and manual two operating mode, may realize the linkage and the partition revolution work.

3. Main composition of machine
This unit consists of the decoiler, ML900 flatting, 200 punch, punching die, servo feeding, guider, main roll forming machine, follow cutting, cut-to-length part, electrical control cabinet; etc.

4. Each part major technical parameters
4.1 Drive decoiler
1). Material width 860mm
2). Material weight 6000kg
3). Material outer diameter 1200mm
4). Drive power: Electromotor and speed reducer integration, 4KW frequency conversion electromotor
5). Frame type: Cantalever inner support, manual handle afterbody, pneumatic press cantalever.

4.2 Flatting
1) Working rolls: 11 rolls, up 4/down 5, the residual 2 rolls is clamp deliver rolls.
2) Flatting bound: Material thickness 1-2mm, material width 100-860mm
3) Drive power: 5.5kw frequency conversion electromotor
4) Speed reducer model: ZQ250
5) Flatting speed: 3-10 m/min
6) Parenthesis up and down a pair of fortified wheel

4.3 Continual punching mould
1. Amount: Each kind of width specification 1 set dies, total 6 sets
2. Die require: Cr12 quench

4.4 Servo feeding
1. electromotor power: 4.4kw
2. Multistage type feeding, memory ten group of memory functions
3. Man-machine contact surface numerical control system
4. Uses Mitsubishi servo meter

4.5 Holds material (use in cushion section)
The roller type, the both sides have the bearing support, 3 sets, use in holding the material and under the deposited material spacing

4.6 Guider
A pair of horizontal roller and two pairs of vertical guide rolls, total 1 sets.

4.7 Main roll forming machine.

Type
GY180(Extra wide)

Rack structure
Dragon Gate type memorial arch frame

Forming frame
16 sets

Forming variety
Bridge frame

Material max width
860mm

Material max thickness
¡Ü 2.0mm

Forming width
100-900mm

The diameter of the roller axis
85mm

Roll mould material
Gcr15

Quenching treatment
HRC58-62

Drive type
30kw frequency conversion electromotor


4.8 Hydraulic cutting
1. Hydraulic pumping station: 5.5kw
2. blade material : Cr12, quench treatment

4.9 Electrical control
4.9.1 Main operation control cubicle
1) Amount: 1 set
2) Frequency conversion: 3 sets(in main control cubicle, control decoiler, flatting and roll forming machine)
3) PLC control: 1 set
4)8 inch liquid crystal touch screens
5) All electrical element is the Mitsubishi original installation brand

4.9.2 assistant control cubicle
Amount: 3 sets (follow decoiler, flatting, roll forming machine)
Control type : Manual handle

5. After-sale service
1. We see to the equipment's installment, the debugging and free training operators
2. We offer the equipment's details(including the drawing of roll forming mould, Electric appliance schematic diagram, equipment diagram and so on).

E 106 5 Manufacturer of Brass Chrome-Plated Serpentine Beer Towers Yuhuan Meilanke Valve Co., Ltd. is a manufacturer of beer taps. The beer taps in the following pictures, the materials in contact with beer, are all 304 stainless steel. The beer tower is also made of 304 stainless steel. Please feel free to contact me.

It is used to analyze the length of cotton fiber or chemical fiber. It consists of two parts, namely fiber draw-off unit and analyzer. The properties should be in conformity with the requirement specified in gb/t6908.1
Main technical data
1. Fiber draw-off unit
A. Diameter of front roller ª)8mm
B. Diameter of rear roller ª)16mm
C. Diameter of covered roll ª)17mm
D. Diameter of velvet lap roll ª)66mm
2. Fiber analyzer
A. Diameter of input roller ª)19.1mm
B. Spring press of analyzer 70n
3. Outline size L205íßw150íßh240mm.

It is used to measure tensile strength and breaking elongation of single yarn. The properties should be conformity with the requirement specified in ISO2062 and GB/T3916. Using special software to connect PC, the data can be saved or printed.

Main Technical Data
* Testing Range and Measuring Accuracy 200N í+1%
* Tensile Speed 20~1200mm/min
* Precision of Tensile Speed í+2%
* Outline Size L600í-W350í-H1100mm.

Qcl-1800 is designed by european ce symbol, and also is measured up to iso9001 standard, which guarantees the quality of the products. And it is made up with three main parts: preform loading system, heater channel & blow station. Qcl-1800, which adopted high pressure clamping, makes self-adjustment in accordance with the different pressure needed during production, thus ensures the super clamping force. With such effective control over air energy and power, it takes a big part to lower costs and improve efficiency.

Qcl-1800 automatic blow molding machine is widely used to produce varieties of pet plastic container and package for mineral water, beverage, oil, cosmetic and hot infusion, ect. Controlled by micro-computer with each main process fitted with safety of self-locking, it is operated by only one worker and the total production is completed automatically. Its wide utilization and reliable performance make it become popular and attractive to all bottle manufacturers.

Ran-sc-1095 (dc)

Application

Chemistry for performance

Achieves better tegwa and higher whiteness
Good absorption properties with softer feel
Better and consistent dyeing and printing results
Lower dosage level give lower bod, cod value in processed water
Achieves desired tegwa with excellent absorption
Better whiteness and softer feel
Chemistry for economics

Lower dosage
Replace mercerization aid / wetting agent, by 1-2 gpl ran-sc-1095 (dc)

Physical properties


Product/appearance/stability/phdosage/pack size:
Non-ionic, bio-degradable, eco-friendly/light
Yellowish/viscous liquid stable over wide
Range of/ph 6-7/6-10 gpl for cotton,
3 û 6 gpl for spun fabric (pet/co blends)/
65 kg

Note: dosage given on weight of fabric
Preparation of ran-sc-1095 (dc) dilution


Shake the carboy of ran-sc-1095 (dc) before use for uniform product mix.
Weigh the required quantity of ran-sc-1095 (dc).
Add hot water (55 û 60¦c) in 1:4 (25% soln.) or 1:10 (10% soln.) proportion under
Stirring continuously to make a uniform dilution without any particulate matter.

Note: this is a new development, please consult us before use. After studying existing recipe, we can suggest recipe and procedure for optimum performance as per your requirement.


65 kg carbouys.

In terms of the world's fluid power manufacturers pohu drive system is growing rapidly. Our facilities in-house (foundry, modern cad/cam, cnc machines, clean assembly areas, computerized testing etc.) combined with an enthusiastic workforce, a wide range of technical expertise, ISO 9001 quality systems and a refreshingly flexible approach to customers means that we can very often offer an attractive solution to OEM application requirements.

Plastic crusher

1 it can smash any plastic material rapidly and can be applied on several usages. Ití»s a smasher with full power.
2 the big plastic materials can be smashed directly without blocking which will result in the stopping of smash. So it can save a lot of time.
3 with water cooling system and the clearance between cutters provide facilities of heat dissipation in order to reduce damage effect between bearings and machine bodies and lessen the depreciation of steel characteristics.

Specification:
Power : 75kw
Capacity :maximum 1600kgs/hour at 12mm hole in the screen
Dimension: l1800 x w1500x h2400 mm.


Seaworthy packing

Beer filling line

All working processes are controlled by programing controller and all paramable are adjusted without stooping working.Have both washing and filling abilities. Main parts of air-lines, connected by rigid joint, keeping long time usage and non-leakage. Applying to beer fresh-kepping kegs and draught-beer kegs.Good pipeline designing keeping strong washing ability. Cip automatic wasing system.

Beer keg filling machine
All working processes are controlled by programing controller and all paramable are adjusted without stooping working.Have both washing and filling abilities. Main parts of air-lines, connected by rigid joint, keeping long time usage and non-leakage. Applying to beer fresh-kepping kegs and draught-beer kegs.Good pipeline designing keeping strong washing ability. Cip automatic wasing system.All process is manyal operation, easy to control.The materal is stainless steel , superior quality of corrosion proof, long-life for use.The machine adopt the patent technology of the isopoestic pressure filling.
This equipment is designed for all kinds of beer storage containers (including stainless steel , plastic storage beer keg and fresh-beer keg)of the filling.The device can automatically filling work..The rate of beer waste is less than 1%.We have single , double heads filling machine, you can choice according as you need.

We can produce and provide various safety mesh fences. Our mesh fence products enjoy such properties as corrosion resistance, aging resistance, sunshine resistance and weather resistance. Forms of corrosion resistance include electric galvanizing, hot-dip galvanizing, PVC spraying and PVC coating

Specifications (H x W): 800, 1,000, 1,200, 1,500, 1,600, 1,800, 2,000 x 3,000mm; double layers 2,400, 2,600 x 2,800 x 3,000 x 3,000mm
Corner post: 48 x 2.5
Wire guage: 3mm, 4mm. 5mm, 5mm 4.5mm
the aperture size: 50 x 140mm, 50 x 200mm, 75 x 250mm

Plastic granulating production line

Applicable material : pe/pp film
The condition of the material: the proportion of water should not more than 4%, without metal , stone and other impurities.
The maximum output : ldpe/ hdpe=260í½300 kg/h pp= 150í½200 kg/h



Wooden

Cavities:single or multi
Mold runner:cold or hot runner
Gate type:side gate, sub gate, pin point gate, edge gate etc
Mould life:200~1 m available
Certification:iso 9001:2008

Jute loom

Weaving:- Power Loom, Jute Loom, Rug Loom (First time in India), Carpet Loom(First time in India), Velvet Loom, Towel/Terry Towel Loom, Canvas Loom, Wrapper Loom, Blanket Loom, Handloom Jacquard, Power Jacquard, Dobby, Shuttle-Box (1x2, 2x2, 2x4, 4x4).

Weaving preparatory:- Warping, Sectional Warping, High tech Sectional Warping (For Rapier Looms), Winding: Cone 2 Cone, Hank 2 Cone, Cheese Winding, Spool Winding, Tube Winding, Pirn Winding, Hollow-Cop Winding, Cop-Less Winding,

Processing, Furnishing & Printing Machinery: - Jigger, Jumbo Jigger, Mangle, Hydro Extractor, Decatise, Drawing Range, Bale Press, Heat Transfer Printing Machine (Flat & Running), Cloth Rolling, Cloth Folding, Cloth Inspection Machinery.

Martial Handling Equipments: - Beam Trolley, Empty beam lifting trolley, Filled beam trolley, Heavy Beam Donning Doffing Device.

Rapier Loom Parts: - Pick Gear box, Lett-off Box, Take-up Box, Rapier alignment Guides / Gauges, Warp Beams, Warp beamÆs Flange & all types of gears.

Details about some Revolutionary Product

We have a well equipped R&D in which every year we develop new products. Recently we have developed some extra ordinary products for Textile Industry. Here we called these products as Rug Loom & Carpet Loom. Benefits of both are given below.

Rug Loom: - Long time ago the making of daris / mats / floor coverings were only on handlooms. Which was on older technique? In our new era, new technologies are developing every where. Our science and revolutionary technology has proved their selves in all working fields. Such as telecommunications, air craft, telebrands, medical line etc. Since each field is growing with advanced technology an newly inventions. But our handloom industry still uses older technique. Which are very pity / miserable?
We development a ôRug Loomö by which all the products of handloom are making on this loom instead of handloom. On this machine all motions which are required to make any handloom products can be operated automatically. That means no need to push extra efforts of man power. Now it is easy & cheap to make Handloom items on our Machine.

Carpet Loom: - It was mysteries for a long time that can carpet were made on loom? But our group ôDashmesh Jacquard & Power Loomö has occupied it like a challenge and the hard of our R&D team has proved that nothing is impossible in this world, and made a revolutionary product called ôDashmesh Carpet Loomö now all type of carpets can made on this loom. On this machine no need to done any act by manual because our machine has excellent features for Shading, Picking, Beating & Cutting. With these facilities carpetÆs finishing & production capacity is much increased than the handloom made carpets.

Carpet Loom: - It was mysteries for a long time that can carpet were made on loom? But our group ôDashmesh Jacquard & Power Loomö has occupied it like a challenge and the hard of our R&D team has proved that nothing is impossible in this world, and made a revolutionary product called ôDashmesh Carpet Loomö now all type of carpets can made on this loom. On this machine no need to done any act by manual because our machine has excellent features for Shading, Picking, Beating & Cutting. With these facilities carpetÆs finishing & production capacity is much increased than the handloom made carpets.

Injection mould

Brief of feature and machine technical:
1) Computer-aid-design systemour CAD system is an interactive system, by which our designer could make a timely modify after receiving the customer??s idea. In this system, we mainly adopts the following software: Auto CAD, Pro-engineer and Solidworks etc.
2) Parts' Standardization in the course of designing and manufacture the parts, we are always trying our best to produce standardization parts and standardization spare parts in order to make maintain more easy and make all parts could be changed each other freely.


3) Machine Equipmentin order to raise our products?? quality, we introduce advanced CNC center from Taiwan, Japan and Germany. It has promoted our product quality a jump.
4) Mold Frame:the mold frame machined by CNC center, its position tolerance in every two cavities below 0.01mm. It makes sure the assemble precision of the injection mold.


5) Key partsafter a date using time, most of the injection mold produce by other factories would occur eccentricity problem, but our client could avoid this worry, because our unique eccentricity-rectified system could eliminate this problem before it emerges.
6) Eccentricity-rectified SystemThose key parts (cavity core, cavity and half-ring of neck) entirely made of high quality mold steel from Germany, it??s rigidity up to HRC42?a45m after heat treatment, which ensure the finished plastic products?? precise and injection mold??s using life effectively.


7) Hot Rrunner System hot runner system is the key technical of producing the prefrom injection mold. Independently controlled hot runner nozzle makes the prefrom??s molding course on controlling more easily.
8) Cooling Systemthere is so high efficient in our special designed cooling system, it suits for long time automatic production with normal temperature water, if combined with water chiller, the result will better.

--the more infomation--
ht.tp://w.ww.chinariway.co m/Plastic_mold/Plastic_mold_Injection_mold_IM001.asp

About the more information of the machinery that you mentioned , please visit our web site w ww.plastic-machine-china.c om, or w ww.chinariway.c om . else , you can send email to us: master#RiwayGroup.com .

E71T-1 is an all-position, flux cored welding wire, which is intended for single and multiple pass welding of low-alloy and carbon steel where a minimum 70,000 psi tensile strength and good notch toughness is required. It is an excellent general purpose welding wire. This wire has very low fume, stable arc, good slag removal and excellent mechanical properties.

AWS Specification: AWS A5.20

AWS Classification: E71T-1

Typical Applications:
Buff and fillet welding of hulls and storage tanks
Structural steel
Farm machinery
Construction equipment
General carbon steel fabrication

Welding Current:
DCEP (Electrode Positive, Reverse Polarity)

Typical Wire Chemistry: (as welded with 100% CO2 shielding gas):

100% CO2 75%Ar/25%CO2
C: 0.05 0.05
Si: 0.56 0.64
Mn: 1.39 1.61
P: 0.008 0.005
S: 0.014 0.01

Welding Positions:
All Positions


Available Diameters: 0.8mm, 1.0mm, 1.2mm, 1.4mm & 1.6mm
Available Spools: plastic spool and metal basket
Available Weight per Unit: 0.9kg, 1kg, 5kg 15kg